Cooper Bussmann Services & Application Guide Downtime Reduction, Workplace Safety & Code Compliance Services to Increase Your Productivity Through Protection Section Contents Cooper Bussmann Services Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .418 Engineering - OSCARTM 2.0 Compliance Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .419-420 Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .421 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 Custom Products . . . . . . . . . . . . . . . . . . . . . . . . . 423 Application Guide Fuse technology . . . . . . . . . . . . . . . . . . . . . . . . . . .424-430 Motor circuit branch circuit protection . . . . . . . . . . . . . . .431 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432-434 Out-of-stock substitution/upgrades . . . . . . . . . . . . . . . . 434 Industrial & commercial fuse applications . . . . . . . . . . . 435 Catalog number index . . . . . . . . . . . . . . . . . 436-440 Sales support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .441 RED indicates NEW information Services & Application Guide 417 Services Engineering (R) Total Electrical Safety from Cooper Bussmann 6 7 (R) 5 To Order: To find out more contact your local Cooper Bussmann representative, or visit us online at www.cooperbussmann.com/services. Engineering Catalog Numbers Description 418 Catalog Number One Line Description Development CBSV-ES-EN1 Data Collection CBSV-ES-EN2 Short-Circuit Study CBSV-ES-EN3 Selective Coordination Study CBSV-ES-EN4 Arc-Flash Study CBSV-ES-EN5 Labeling CBSV-ES-EN6 Arc-Flash Training CBSV-ES-EN7 Maintenace Plan for Arc-Flash Study CBSV-ES-EN8 Visit www.cooperbussmann.com/services 2 3 (R) Our comprehensive service offerings include: 1 - Electrical System One-Line Diagram Development 2 - Short-Circuit Current Analysis 3 - Overcurrent Protective Device Time-Current Curve Characteristic 4 - Overcurrent Protective Device Coordination Analysis 5 - Arc-Flash Hazard Analysis 6 - Arc-Flash Hazard Label Production 7 - Electrical Safety Training 8 - Annual Maintenance 1 8 (R) Arc-Flash Safety and Productivity The Cooper Bussmann(R) Services team has the experience in power system design, analysis and electrical safety to best assess and make recommendations that offer maximum protection and productivity. We go beyond just understanding electrical standards and regulations, actively participating in improving circuit protection and electrical safety. 4 Services Engineering - OSCARTM 2.0 Compliance Software Calculate Assembly SCCR with Ease & Confidence Enhanced Cooper Bussmann(R) OSCARTM Software Speeds Code & Standards Compliance The new Cooper Bussmann(R) OSCARTM Version 2.0 SCCR (Short-Circuit Current Rating) compliance software easily guides you through entering your electrical panel's components and calculates an assembly SCCR. This award winning, online, essential design tool allows you to comply quickly and accurately with 2008 NEC(R) and UL 508A Supplement SB for assembly SCCR marking requirements: * Industrial Control Panels [409.110] * Industrial Machinery Electrical Panels [670.3(A)] * HVAC Equipment [440.4(B)] 2006 New Project Management Features: * Simplify your panel design and project organization. * Save and edit existing panel designs. * Save multiple panels under a single project. * Copy existing panels to new projects. New Intuitive Navigation: * Display your one-line diagram. * Select from pre-loaded circuit templates. * Identify the weakest link component automatically. * Print reports and one-line diagrams for required SCCR documentation. * Utilize mouse-over tips to enhance your design. Design with Confidence: * Logic updated to current UL requirements. * Extensive 55,000+ component database. * Search by partial part number or device rating. * Custom device option allows for entering specialized component rating information. To Subscribe: Contact your local Cooper Bussmann distributor, or visit us online at www.cooperbussmann.com/oscar. Services & Application Guide Order Information Description OSCARTM 2.0 Compliance Software Annual Subscription Catalog Number CBSV-SC-EN8 Visit www.cooperbussmann.com/oscar 419 Services Engineering - OSCARTM 2.0 Compliance Software Cooper Bussmann(R) OSCARTM 2.0 Software The Cooper Bussmann OSCAR 2.0 Compliance Software is maintained online to provide you with the most current UL design standards, and to continuously update our product search database with new components and their individual ratings. This software is available 24/7--365 with a one-year subscription. New User Interface Displays Panel Information Including Assembly SCCR Displays Actual One-Line Diagram Easily Search the OSCAR Database to Aid in Design & Part Selection Red Circle Easily Identifies "Weakest Link" Component Limiting Assembly SCCR Drop-Down Menus Enhance Search Capabilities Improved Results & Documentation Detailed Online Report or Print Option Additional Features: * Simplify your panel design and project organization with the My Projects feature. * Copy existing designs to new projects. * Display your one-line diagram as each component is added through the new build-a-circuit graphical interface. * Save and edit existing panel designs. * Save multiple panels under a single project. * Select from pre-loaded templates of common circuit types for faster design development. * Detect combination ratings automatically. * Utilize mouse-over tips to enhance your design. Computer System Requirements: All calculating activity takes place on the Cooper Bussmann server. Your computer only needs to have sufficient band width access to the Internet and the minimum requirements listed below. Performance is optimized by utilizing Internet Explorer and a PC. Apple/Macintosh computers and other web browsers may compromise OSCAR 2.0 performance. * Computer: Pentium 1 PC or equivalent * Web Browser: Internet Explorer 5.5 with Java script and cookies enabled * Internet Connection: ADSL minimum 420 Visit www.cooperbussmann.com/oscar Services Training Knowledge That Minimizes Risk to Maximize Productivity and Protection Technology evolves, the Code and standards change, and new personnel are joining your operation. How do you manage this changing environment while still focusing on what you do best - running your operation? Expert training from Cooper Bussmann is the solution. We provide the training when and where you need it. Cooper Bussmann can deliver our world-class safety and technical training on-site at your facility or ours. Training: To arrange a Cooper Bussmann(R) training seminar, contact your local Cooper Bussmann representative, or e-mail us at services@cooperbussmann.com. Publications and e-Training Modules Cooper Bussmann(R) Services has developed advanced, value-added technical resources to meet the more demanding needs around Code compliance, and electrical design and safety. How To Order: Training Catalog Numbers For detailed descriptions on Description this portfolio visit Designing Commercial & Industrial Power Systems Per Person www.cooperbussmann.com/services. Understanding Short-Circuit Current Rating Basics 1 Hour Hardcopy materials are available 2 Hour through your local Cooper Bussmann Designing Panels with Higher SCCRs distributor. Understanding Electrical Safety Basics 1 Hour Electrical Hazards and Designing for Safety 2 Hour Catalog Number CBSV-ES-ED1 CBTR-SC-1HP CBTR-SC-2HP CBTR-ES-1HP CBTR-ES-2HP 8 Hours (0.8 CEU) CBTR-ES-1DA Safety Basics User Kit Hard Copy CBSV-ES-ED3 Safety Basics Trainer Kit Hard Copy CBSV-ES-ED4 Safety Basics Video (VHS) Hard Copy CBSV-ES-ED5 Safety Basics CD Hard Copy CBSV-ES-ED6 Safety Basics Handbook Hard Copy CBPUB-ES-ED1H Selecting Protective Devices (SPD) Hard Copy CBPUB-ES-ED2H Electrical Plan Review (EPR) and Answer Sheet Hard Copy CBPUB-ES-ED3H Interrupting Rating Overcurrent Protection DVD Hard Copy CBPUB-ES-ED30H Selective Coordination: Preventing Blackouts DVD Hard Copy CBPUB-ES-ED31H Current Limitation Overcurrent Protection DVD Hard Copy CBPUB-ES-ED32H Motor Starter Protection: Overcurrent DVD Hard Copy CBPUB-ES-ED33H Motor Protection DVD Hard Copy CBPUB-ES-ED34H Specification Grade Protection DVD Hard Copy CBPUB-ES-ED35H Overcurrent Protection 6 DVD Set Hard Copy CBPUB-ES-ED36H Visit www.cooperbussmann.com/services 421 Services & Application Guide NFPA 70E Workplace Guidelines Services Testing Performance and Compliance Certification for Components and Assemblies The Cooper Bussmann(R) Paul P. Gubany Center for High Power Technology at Cooper Bussmann is the electrical industry's most comprehensive facility for testing and certifying electrical components and assemblies. OEM customers make the Gubany Center their first choice in testing equipment such as: * Drives, both AC and DC * Circuit breakers * Motor control centers * Soft starters * Fuses * Power distribution panels * Surge suppressors * Cables Wide Range of Capability Built to exceed the short circuit capacity of today's high power electrical distribution systems, the Gubany Center performs: * Ultra-high power testing from 200kA to 300kA at 600Vac, three-phase * Medium power testing from 5kA to 200kA at 600Vac, singleand three-phase; to 100kA at 1450Vac single-phase; to 100kA at 1000Vdc * Low power testing up to 5kA at 600Vac, single-phase. Our technicians conduct tests to many global agency standards including: * ANCE * ETL * ANSI * IEC, and * CE * Underwriters Laboratories * CSA To Order: To find out more contact your local Cooper Bussmann representative, or visit us online at www.cooperbussmann.com/services. 422 Testing Catalog Numbers Description Catalog Number High Power Testing Hourly Rate Medium Power Testing Hourly Rate CBSV-ES-TEMP Low Power Testing Hourly Rate CBSV-ES-TELP Visit www.cooperbussmann.com CBSV-ES-TEHP Services Custom Products Creating the Right Answers to Unique or Demanding Needs When you wish to gain a competitive edge or improve your product's performance, have Cooper Busmann provide a custom product that can: * Improve functionality and utility * Fit unique design needs * Reduce labor and component costs Our Expertise Is Your Advantage For over 90 years, Cooper Bussmann has designed and manufactured products that improve electrical safety and performance. Whether it's modifying an existing product or creating a new one, our experience effectively brings together the skills to design, prototype, test, manufacture and secure agency approvals to deliver a single component, sub-assembly or finished product. Cooper Busman can design and manufacture products that integrate: * Fuses - with the right size and performance characteristics * Fuse holders and blocks - with the requisite terminations, mounting options and safety features To Find Out More: If you need a custom solution to a product problem, submit a Request for Quotation to your local authorized Cooper Bussmann distributor or sales representative. * Wire connection products - that make wiring simpler, safer and faster * Molded products - that give the unique shape your product needs * Power distribution products - that meet prevailing agency and Code requirements In-House Testing All electrical performance testing of your custom products can be performed at the Cooper Bussmann(R) Paul P. Gubany Center for High Power Technology, an ASTA and CSA accredited, and an ANCE Designated facility. We're able to conduct electrical performance testing that replicates any power system to be encountered in any country, covering: * Up to 300kA and 600Vac * Up to 100kA and 1000Vdc And our technicians conduct tests to many global agency standards including: * ANCE * ANSI * CE Services & Application Guide * CSA * ETL * IEC, and * Underwriters Laboratories For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 423 Application Guide Fuse Technology Circuit Protection The following is a basic introduction to overcurrent protection and fuse technology. In depth information on the selection and application of overcurrent protective devices is available in the Cooper Bussmann publication "Selecting Protective Devices" (SPD). This publication is available free of charge as a PDF download at www.cooperbussmann.com/spd. Electrical distribution systems are often quite complicated. They cannot be absolutely fail-safe. Circuits are subject to destructive overcurrents. Harsh environments, general deterioration, accidental damage, damage from natural causes, excessive expansion, and/or overloading of the electrical distribution system are factors which contribute to the occurrence of such overcurrents. Reliable protective devices prevent or minimize costly damage to transformers, conductors, motors, and the other many components and loads that make up the complete distribution system. Reliable circuit protection is essential to avoid the severe monetary losses which can result from power blackouts and prolonged downtime of facilities. It is the need for reliable protection, safety, and freedom from fire hazards that has made the fuse a widely used protective device. Overcurrents An overcurrent is either an overload current or a short-circuit current. The overload current is an excessive current relative to normal operating current, but one which is confined to the normal conductive paths provided by the conductors and other components and loads of the distribution system. As the name implies, a short-circuit current is one which flows outside the normal conducting paths. than the normal operating current. A high level fault may be 50,000A (or larger). If not cut off within a matter of a few thousandths of a second, damage and destruction can become rampant--there can be severe insulation damage, melting of conductors, vaporization of metal, ionization of gases, arcing, and fires. Simultaneously, high level short-circuit currents can develop huge magnetic-field stresses. The magnetic forces between bus bars and other conductors can be many hundreds of pounds per linear foot; even heavy bracing may not be adequate to keep them from being warped or distorted beyond repair. Fuses The fuse is a reliable overcurrent protective device. A "fusible" link or links encapsulated in a tube and connected to contact terminals comprise the fundamental elements of the basic fuse. Electrical resistance of the link is so low that it simply acts as a conductor. However, when destructive currents occur, the link very quickly melts and opens the circuit to protect conductors, and other circuit components and loads. Fuse characteristics are stable. Fuses do not require periodic maintenance or testing. Fuses have three unique performance characteristics: 1. Modern fuses have an extremely "high interrupting rating"--can withstand very high fault currents without rupturing. 2. Properly applied, fuses prevent "blackouts." Only the fuse nearest a fault opens without upstream fuses (feeders or mains) being affected--fuses thus provide "selective coordination." (These terms are precisely defined in subsequent pages.) 3. Fuses provide optimum component protection by keeping fault currents to a low value...They are said to be "current limiting." Overloads Voltage Rating Overloads are most often between one and six times the normal current level. Usually, they are caused by harmless temporary surge currents that occur when motors are started-up or transformers are energized. Such overload currents, or transients, are normal occurrences. Since they are of brief duration, any temperature rise is trivial and has no harmful effect on the circuit components. (It is important that protective devices do not react to them.) The voltage rating of a fuse must be at least equal to or greater than the circuit voltage. It can be higher but never lower. For instance, a 600V fuse can be used in a 208V circuit. Continuous overloads can result from defective motors (such as worn motor bearings), overloaded equipment, or too many loads on one circuit. Such sustained overloads are destructive and must be cut off by protective devices before they damage the distribution system or system loads. However, since they are of relatively low magnitude compared to short-circuit currents, removal of the overload current within minutes will generally prevent equipment damage. A sustained overload current results in overheating of conductors and other components and will cause deterioration of insulation, which may eventually result in severe damage and short-circuits if not interrupted. Short-Circuits Whereas overload currents occur at rather modest levels, the short-circuit or fault current can be many hundred times larger 424 The voltage rating of a fuse is a function of its capability to open a circuit under an overcurrent condition. Specifically, the voltage rating determines the ability of the fuse to suppress the internal arcing that occurs after a fuse link melts and an arc is produced. If a fuse is used with a voltage rating lower than the circuit voltage, arc suppression will be impaired and, under some fault current conditions, the fuse may not clear the overcurrent safely. Special consideration is necessary for semiconductor fuse and medium voltage fuse applications, where a fuse of a certain voltage rating is used on a lower voltage circuit. Amp Rating Every fuse has a specific amp rating. In selecting the amp rating of a fuse, consideration must be given to the type of load and code requirements. The amp rating of a fuse normally should not exceed the current carrying capacity of the circuit. For instance, if a conductor is rated to carry 20A, a 20A fuse is the largest that should be used. However, there are some specific circumstances in which the amp rating is permitted to be greater than the current carrying capacity of the circuit. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Application Guide Fuse Technology A typical example is the motor circuit; dual-element fuses generally are permitted to be sized up to 175% and non-timedelay fuses up to 300% of the motor full-load amps. As a rule, the amp rating of a fuse and switch combination should be selected at 125% of the continuous load current (this usually corresponds to the circuit capacity, which is also selected at 125% of the load current). There are exceptions, such as when the fuse-switch combination is approved for continuous operation at 100% of its rating. Interrupting Rating A protective device must be able to withstand the destructive energy of short-circuit currents. If a fault current exceeds the capability of the protective device, the device may actually rupture, causing additional damage. Thus, it is important when applying a fuse or circuit breaker to use one which can sustain the largest potential short-circuit currents. The rating which defines the capacity of a protective device to maintain its integrity when reacting to fault currents is termed its "interrupting rating". The interrupting rating of most branchcircuit, molded case, circuit breakers typically used in residential service entrance panels is 10,000A. (Please note that a molded case circuit breaker's interrupting capacity will typically be lower than its interrupting rating.) Larger, more expensive circuit breakers may have interrupting ratings of 14,000A or higher. In contrast, most modern, current-limiting fuses have an interrupting rating of 200,000 or 300,000A and are commonly used to protect the lower rated circuit breakers. The National Electrical Code, Section 110-9, requires equipment intended to break current at fault levels to have an interrupting rating sufficient for the current that must be interrupted. Selective Coordination - Prevention of Blackouts The coordination of protective devices prevents system power outages or blackouts caused by overcurrent conditions. When only the protective device nearest a faulted circuit opens and larger upstream fuses remain closed, the protective devices are "selectively" coordinated (they discriminate). The word "selective" is used to denote total coordination...isolation of a faulted circuit by the opening of only the localized protective device. KRP-C 1200SP LPS-RK 600SP LPS-RK 200SP 2:1 (or more) 2:1 (or more) This diagram shows the minimum ratios of amp ratings of Low-Peak Yellow fuses that are required to provide "selective coordination" (discrimination) of upstream and downstream fuses. Current Limitation - Component Protection Areas within waveform loops represent destructive energy impressed upon circuit components Normal load current Initiation of short-circuit current Circuit breaker trips and opens short-circuit in about 1 cycle A non-current-limiting protective device, by permitting a shortcircuit current to build up to its full value, can let an immense amount of destructive short-circuit heat energy through before opening the circuit. Fuse opens and clears short-circuit in less than TM cycle A current-limiting fuse has such a high speed of response that it cuts off a short-circuit long before it can build up to its full peak value. If a protective device cuts off a short-circuit current in less than one-quarter cycle, before it reaches its total available (and highly destructive) value, the device is a "current-limiting" device. Most modern fuses are current-limiting. They restrict fault currents to such low values that a high degree of protection is given to circuit components against even very high short-circuit currents. They permit breakers with lower interrupting ratings to be used. They can reduce bracing of bus structures. They minimize the need of other components to have high short-circuit current "withstand" ratings. If not limited, short-circuit currents can reach levels of 30,000 or 40,000A or higher in the first half cycle (.008 seconds, 60Hz) after the start of a short-circuit. The heat that can be produced in circuit components by the immense energy of short-circuit currents can cause severe insulation damage or even explosion. At the same time, huge magnetic forces developed between conductors can crack insulators and distort and destroy bracing structures. Thus, it is important that a protective device limit fault currents before they reach their full potential level. Services & Application Guide Unlike electromechanical inertial devices (circuit breakers), it is a simple matter to selectively coordinate fuses of modern design. By maintaining a minimum ratio of fuse-amp ratings between an upstream and downstream fuse, selective coordination is assured. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 425 Application Guide Fuse Technology Operating Principles of Cooper Bussmann(R) Fuses The principles of operation of the modern, current-limiting fuses are covered in the following paragraphs. Non-Time-Delay Fuses The basic component of a fuse is the link. Depending upon the amp rating of the fuse, the single-element fuse may have one or more links. They are electrically connected to the end blades (or ferrules) (see Figure 1) and enclosed in a tube or cartridge surrounded by an arc quenching filler material. Cooper Bussmann(R) Limitron(R) and T-Tron(R) fuses are both single-element fuses. Under normal operation, when the fuse is operating at or near its amp rating, it simply functions as a conductor. However, as illustrated in Figure 2, if an overload current occurs and persists for more than a short interval of time, the temperature of the link eventually reaches a level which causes a restricted segment of the link to melt. As a result, a gap is formed and an electric arc established. However, as the arc causes the link metal to burn back, the gap becomes progressively larger. Electrical resistance of the arc eventually reaches such a high level that the arc cannot be sustained and is extinguished. The fuse will have then completely cut off all current flow in the circuit. Suppression or quenching of the arc is accelerated by the filler material. (See Figure 3.) Single-element fuses of present day design have a very high speed of response to overcurrents. They provide excellent short-circuit component protection. However, temporary, harmless overloads or surge currents may cause nuisance openings unless these fuses are oversized. They are best used, therefore, in circuits not subject to heavy transient surge currents and the temporary over-load of circuits with inductive loads such as motors, transformers, solenoids, etc. Because single-element, fast-acting fuses such as Limitron and T-Tron fuses have a high speed of response to short-circuit currents, they are particularly suited for the protection of circuit breakers with low interrupting ratings. Whereas an overload current normally falls between one and six times normal current, short-circuit currents are quite high. The fuse may be subjected to short-circuit currents of 30,000 or 40kA or higher. Response of current limiting fuses to such currents is extremely fast. The restricted sections of the fuse link will simultaneously melt (within a matter of two or threethousandths of a second in the event of a high-level fault current). The high total resistance of the multiple arcs, together with the quenching effects of the filler particles, results in rapid arc suppression and clearing of the circuit. (Refer to Figures 4 & 5) Short-circuit current is cut off in less than a half-cycle, long before the short-circuit current can reach its full value (fuse operating in its current limiting range). 426 Figure 1. Cutaway view of typical single-element fuse. Figure 2. Under sustained overload, a section of the link melts and an arc is established. Figure 3. The "open" single-element fuse after opening a circuit overload. Figure 4. When subjected to a short-circuit current, several sections of the fuse link melt almost instantly. Figure 5. The "open" single-element fuse after opening a short circuit. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Application Guide Fuse Technology Cooper Bussmann(R) Dual-Element Fuses There are many advantages to using these fuses. Unlike single-element fuses, the Cooper Bussmann(R) dual-element, time-delay fuses can be sized closer to provide both high performance short-circuit protection and reliable overload protection in circuits subject to temporary overloads and surge currents. For ac motor loads, a single-element fuse may need to be sized at 300% of an a.c. motor current in order to hold the starting current. However, dual-element, time delay fuses can be sized much closer to motor loads. For instance, it is generally possible to size Fusetron Dual-Element Fuses, FRS-R and FRN-R and Low-Peak(R) Dual-Element Fuses, LPS-RK_SP and LPN-RK_SP, at 125% and 130% of motor full load current, respectively. Generally, the Low-Peak Dual-Element Fuses, LPJ_SP, and CUBEFuse(R), TCF, can be sized at 150% of motor full load amps. This closer fuse sizing may provide many advantages such as: (1) smaller fuse and block, holder or disconnect amp rating and physical size, (2) lower cost due to lower amp rated devices and possibly smaller required panel space, (3) better short-circuit protection - less short-circuit current let-through energy, and (4) potential reduction in the arc-flash hazard. Insulated end-caps to help prevent accidental contact with live parts. Filler material Figure 6. This is the LPS-RK100SP, a 100A, 600V Low-Peak, Class RK1, Dual-Element Fuse that has excellent time-delay, excellent current-limitation and a 300,000A interrupting rating. Artistic liberty is taken to illustrate the internal portion of this fuse. The real fuse has a non-transparent tube and special small granular, arc-quenching material completely filling the internal space. Short-circuit element Small volume of metal to vaporize Overload element Figure 7. The true dual-element fuse has distinct and separate overload element and shortcircuit element. Figure 9. Short-circuit operation: Modern fuses are designed with minimum metal in the restricted portions which greatly enhance their ability to have excellent current-limiting characteristics - minimizing the short circuit let-through current. A short-circuit current causes the restricted portions of the short-circuit element to vaporize and arcing commences. The arcs burn back the element at the points of the arcing. Longer arcs result, which assist in reducing the current. Also, the special arc quenching filler material contributes to extinguishing the arcing current. Modern fuses have many restricted portions, which results in many small arclets - all working together to force the current to zero. Before Filler quenches the arcs Spring After Figure 10. Short-circuit operation: The special small granular, arc-quenching material plays an important part in the interruption process. The filler assists in quenching the arcs; the filler material absorbs the thermal energy of the arcs, fuses together and creates an insulating barrier. This process helps in forcing the current to zero. Modern current-limiting fuses, under shortcircuit conditions, can force the current to zero and complete the interruption within a few thousandths of a second. When the short-circuit current is in the current-limiting range of a fuse, it is not possible for the full available short-circuit current to flow through the fuse - it's a matter of physics. The small restricted portions of the short-circuit element quickly vaporize and the filler material assists in forcing the current to zero. The fuse is able to "limit" the short-circuit current. Overcurrent protection must be reliable and sure. Whether it is the first day of the electrical system or thirty or more years later, it is important that overcurrent protective devices perform under overload or short-circuit conditions as intended. Modern current-limiting fuses operate by very simple, reliable principles. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 427 Services & Application Guide Figure 8. Overload operation: Under sustained overload conditions, the trigger spring fractures the calibrated fusing alloy and releases the "connector". The insets represent a model of the overload element before and after. The calibrated fusing alloy connecting the short-circuit element to the overload element fractures at a specific temperature due to a persistent overload current. The coiled spring pushes the connector from the short-circuit element and the circuit is interrupted. Application Guide Fuse Technology Fuse Time-Current Curves When a low level overcurrent occurs, a long interval of time will be required for a fuse to open (melt) and clear the fault. On the other hand, if the overcurrent is large, the fuse will open very quickly. The opening time is a function of the magnitude of the level of overcurrent. Overcurrent levels and the corresponding intervals of opening times are logarithmically plotted in graph form as shown to the right. Levels of overcurrent are scaled on the horizontal axis; time intervals on the vertical axis. The curve is thus called a "time-current" curve. 400 300 This particular plot reflects the characteristics of a 200A, 250V, Low-Peak(R) dual-element fuse. Note that at the 1,000A overload level, the time interval which is required for the fuse to open is 10 seconds. Yet, at approximately the 2,200A overcurrent level, the opening (melt) time of a fuse is only 0.01 seconds. It is apparent that the time intervals become shorter as the overcurrent levels become larger. This relationship is termed an inverse time-to-current characteristic. Time-current curves are published or are available on most commonly used fuses showing "minimum melt," "average melt" and/or "total clear" characteristics. Although upstream and downstream fuses are easily coordinated by adhering to simple amp ratios, these time-current curves permit close or critical analysis of coordination. 40 30 The derating of dual-element fuses based on increased ambient temperatures closely parallels the derating curve of motors in elevated ambient. This unique feature allows for optimum protection of motors, even in high temperatures. Affect of ambient temperature on operating characteristics of Fusetron and Low-Peak dual-element fuses. 150 10 8 6 4 3 2 1 .8 .6 .4 .3 .2 110 .04 100 .03 90 60 30 -76F -40F -4F (-60C) (-40C) (-20C) -32F (0C) 68F (20C) 104F (40C) 140F (60C) 176F (80C) 212F (100C) CURRENT IN AMPS AMBIENT 428 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 6,000 8,000 10,000 3,000 4,000 2,000 40 600 800 1,000 .01 50 300 400 70 .02 Affect on Opening Time 200 80 100 PERCENT OF RATING OR OPENING TIME Affect on Carrying Capacity Rating 120 20 .1 .08 .06 140 130 LOW-PEAK LPN-RK200 SP (RK1) 100 80 60 TIME IN SECONDS Better Motor Protection in Elevated Ambients 200 Application Guide Fuse Technology Better Protection Against Motor Single Phasing When secondary single-phasing occurs, the current in the remaining phases increases to approximately 200% rated full load current. (Theoretically 173%, but change in efficiency and power factor make it about 200%.) When primary singlephasing occurs, unbalanced voltages occur on the motor circuit causing currents to rise to 115%, and 230% of normal running currents in delta-wye systems. Dual-element fuses sized for motor running overload protection will help to protect motors against the possible damages of single-phasing. Classes of Fuses Safety is the industry mandate. However, proper selection, overall functional performance and reliability of a product are factors which are not within the basic scope of listing agency activities. In order to develop its safety test procedures, listing agencies develop basic performance and physical specifications or standards for a product. In the case of fuses, these standards have culminated in the establishment of distinct classes of low-voltage (600V or less) fuses; Classes RK1, RK5, G, L, T, J, H and CC being the more important. The fact that a particular type of fuse has, for instance, a classification of RK1, does not signify that it has the identical function or performance characteristics as other RK1 fuses. In fact, the Limitron(R) non-time-delay fuse and the Low-Peak dual-element, time-delay fuse are both classified as RK1. Substantial differences in these two RK1 fuses usually requires considerable difference in sizing. Dimensional specifications of each class of fuse does serve as a uniform standard. In the above illustration, a grooved ring in one ferrule provides the rejection feature of the Class R fuse in contrast to the lower interrupting rating, non-rejection type. Branch-Circuit Listed Fuses Branch-circuit listed fuses are designed to prevent the installation of fuses that cannot provide a comparable level of protection to equipment. The characteristics of Branch-circuit fuses are: 1. They must have a minimum interrupting rating of 10kA 2. They must have a minimum voltage rating of 125V. 3. They must be size rejecting such that a fuse of a lower voltage rating cannot be installed in the circuit. 4. They must be size rejecting such that a fuse with a current rating higher than the fuse holder rating cannot be installed. Class R Fuses For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Services & Application Guide Class R ("R" for rejection) fuses are high performance,110 to 600A units, 250V and 600V, having a high degree of current limitation and a short-circuit interrupting rating of up to 300kA (RMS Sym.). Cooper Bussmann(R) Class R fuses include Class RK1 Low-Peak(R) and Limitron(R) fuses, and RK5 Fusetron fuses. They have replaced the K1 Low-Peak and Limitron fuses and K5 Fusetron fuses. These fuses are identical, with the exception of a modification in the mounting configuration called a "rejection feature." This feature permits Class R fuses to be mounted in rejection type fuseclips. "R" type fuseclips prevent older type Class H, ONE-TIME and RENEWABLE fuses from being installed. The use of Class R fuse holders is thus an important safeguard. The application of Class R fuses in such equipment as disconnect switches permits the equipment to have a high interrupting rating. NEC(R) Articles 110-9 and 230-65 require that protective devices have adequate capacity to interrupt short-circuit currents. Article 240-60(b) requires fuse holders for current-limiting fuses to reject non-current-limiting type fuses. 429 Application Guide Fuse Technology Supplementary Overcurrent Protective Devices for use in Motor Control Circuits Branch Circuit vs. Supplemental Overcurrent Protective Devices Branch circuit overcurrent protective devices (OCPD) can be used everywhere OCPD are used, from protection of motors and motor circuits and group motor circuits, to protection of distribution and utilization equipment. Supplemental OCPD can only be used where proper protection is already being provided by a branch circuit device, by exception [i.e., 430.72(A)], or if protection is not required. Supplemental OCPD can often be used to protect motor control circuits but they cannot be used to protect motors or motor circuits. A very common misapplication is the use of a supplementary overcurrent protective device such as a UL 1077 mechanical overcurrent device for motor branch circuit short-circuit and ground fault protection. Supplementary OCPDs are incomplete in testing compared to devices that are evaluated for branch circuit protection. THIS IS A SERIOUS MISAPPLICATION AND SAFETY CONCERN!! Caution should be taken to assure that the proper overcurrent protective device is being used for the application at hand. Below is a description of popular supplementary overcurrent protective devices. Most supplemental overcurrent protective devices have very low interrupting ratings. Just as any other overcurrent protective device, supplemental OCPDs must have an interrupting rating equal to or greater than the available short-circuit current. Reliability and Maintenance of Overcurrent Protective Devices Modern fuses have several significant advantages over mechanical overcurrent protective devices - one of those advantages is reliability. Whether the first day of the electrical system or years later, it is important that overcurrent protective devices perform under overload and fault conditions as intended. Modern current-limiting fuses operate by very simple, reliable principles. Fuses do not have to be maintained. By their inherent design, fuses do not have elements or mechanisms to calibrate, adjust or lubricate. If and when fuses are called upon to open on an overcurrent, installing the same type and ampere rated fuses provides the circuit with new factorycalibrated protection. The original design integrity can be maintained throughout the life of the electrical system. One last point on fuse systems; the terminations, clips and disconnects should be maintained as necessary. In contrast, circuit breakers are mechanical devices, even those with electronic sensing, and circuit breakers require periodic maintenance, testing, and if necessary reconditioning or replacement. This is required per the circuit breaker manufacturers' instructions, NFPA 70B Recommended Practice for Electrical Equipment Maintenance, and NEMA AB4. If circuit breakers are not properly maintained, the interrupting rating, circuit component protection, coordination, and electrical safety may be compromised. See www.cooperbussmann.com for more information on Reliability and Maintenance. Supplemental fuses as listed or recognized to the UL/CSA/ANCE Trinational 248-14 Standard These are fuses that can have many voltages and interrupting ratings within the same case size. Examples of supplemental fuses are 1332'' X 1 12'', 5 x 20mm, and 14'' x 1 14'' fuses. Interrupting ratings range from 35 to 100,000 amps. 430 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Application Guide Motor Circuit Branch Circuit Protection Motor Circuits - Choice of Overcurrent Protection Motor circuits have unique characteristics and several functions, such as short-circuit protection, overload protection and automatic/ remote start/stop, that may be required. Sometimes the comment is made that users prefer circuit breakers because they can be reset. Let's examine the choice of either circuit breakers or current- limiting fuses for motor branch circuit protection. In the case to be examined, fuses and circuit breakers (includes magnetic only circuit breakers which are called MCPs or motor circuit protectors) are sized with the intent to provide only short-circuit and ground fault protection for the motor branch circuit protection per 430.52. Other means, such as overload relays, provide the motor overload protection. Typical thermal magnetic circuit breakers can only be sized for motor branch circuit protection (typically 200% - 250% of motor current) because if they are sized closer, the motor starting current trips the circuit breaker's instantaneous mechanism. Magnetic only circuit breakers (MCPs) are intentionally not provided with overload capability; they only operate on short-circuit currents. There are some fuses such as the FRS-R and LPS-RK fuses that can be sized close enough for motor running overload protection or backup motor running protection. But for the discussion in this section, assume current-limiting fuses are sized only for motor short-circuit and ground fault protection. It is important to note that in this protection level being discussed, a circuit breaker or fuses should only open if there is a fault on the motor circuit. A separate overload protective device, such as an overload relays, provides motor overload protection per 430.32. Here are some important considerations: 1. OSHA regulation 1910.334(b)(2) Use of Equipment states: Reclosing circuits after protective device operation. After a circuit is deenergized by a circuit protective device, the circuit may not be manually reenergized until it has been determined that the equipment and circuit can be safely energized. The repetitive manual reclosing of circuit breakers or reenergizing circuits through replaced fuses is prohibited. NOTE: When it can be determined from the design of the circuit and the over-current devices involved that the automatic operation of a device was caused by an overload rather than a fault condition, no examination of the circuit or connected equipment is needed before the circuit is reenergized. So the speed of reclosing a circuit breaker after a fault is not an advantage. The law requires that if the condition is a fault (that is the only reason the circuit breaker or fuses should open on a motor circuit), then the fault must be corrected prior to replacing fuses or resetting the circuit breaker. Consequently, with circuit breaker protection, after a fault condition, 3. Circuit breakers must be periodically tested to verify they mechanical operate and electrically tested to verify they still are properly calibrated within specification. The circuit breaker manufacturers recommend this. Typically circuit breakers should be mechanically operated at least every year and electrically tested every 1 to 5 years, depending on the service conditions. Modern current-limiting fuses do not have to be maintained or electrically tested to verify they still will operate as intended. The terminations of both circuit breakers and fusible devices need to be periodically checked and maintained to prevent thermal damage. Plus fuse clips should be periodically inspected and if necessary maintained. 4. After a circuit breaker interrupts a fault, it may not be suitable for further service. UL 489, the product standard for molded case circuit breakers, only requires a circuit breaker to interrupt two short-circuit currents at its interrupting rating. Circuit breakers that are rated 100 amps or less do not have to operate after only one short-circuit operation under "bus bar" short-circuit conditions. If the fault current is high, circuit breaker manufacturers recommend that a circuit breaker should receive a thorough inspection with replacement, if necessary. How does one know a circuit breaker's service history or what level of fault current that a circuit breaker interrupts? With modern current-limiting fuses, if the fuse interrupts a fault, new factory calibrated fuses are installed in the circuit. The original level of superior short-circuit protection can be there for the life of the motor circuit. 5. After a fault, the electrician has to walk back to the storeroom to get new fuses; that is if spare fuses are not stored adjacent to the equipment. This does require some additional down time. However, if fuses opened under fault conditions, there is a fault condition that must be remedied. The electrician probably will be going back to the storeroom anyway for parts to repair the fault. If properly selected current-limiting fuses are used in the original circuit, the starter will not sustain any significant damage or loss of overload calibration. With circuit breaker protection on motor circuits, after a fault condition, it may be necessary to repair or replace the starter, so a trip to the storeroom may be necessary. And if the starter is not significantly damaged, it may still need to be tested to insure the let-through energy by the circuit breaker has not caused the loss of starter overload calibration. Also, the circuit breaker needs to be evaluated for suitability before placing it back into service. Who is qualified for that evaluation? How much time will that take? In summary, resettability is not an important feature for motor branch circuit (short-circuit) protection and resettability of the branch circuit protective device is not a benefit for motor circuits. As a matter of fact, resettability of the motor branch circuit overcurrent protective device may encourage an unsafe practice. The function of motor branch circuit protection is fault protection: short-circuit and ground fault protection. Faults do not occur on a regular basis. But when a fault does occur, it is important to have the very best protection. The best motor branch circuit protection can be judged by (1) reliability - its ability to retain its calibration and speed of operation over its lifetime, (2) current-limiting protection - its ability to provide Type 2 "No Damage" protection to the motor starter, and (3) safety - its ability to meet a facility's safety needs. Modern current-limiting fuses are superior to circuit breakers for motor branch circuit protection. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 431 Services & Application Guide 2. The typical level of short-circuit protection for the motor starter provided by circuit breakers and MCPs is referred to as Type 1. This is because most circuit breakers are not current-limiting. So, for a loadside fault, the starter may sustain significant damage such as severe welding of contacts and rupturing of the heater elements. Or the heater/overload relay system may lose calibration. This is an acceptable level of performance per UL 508, which is the product standard for motor starters. Current-limiting fuses can be selected that can provide Type 2 "No Damage" short-circuit protection for motor starters. significant downtime and cost may be incurred in repairing or replacing the starter. With properly selected fuses for Type 2 protection, after the fault is repaired, only new fuses need to be inserted in the circuit; the starter does not have to be repaired or replaced. Application Guide Glossary Ampere (Amp) Class G Fuses Class R Fuses The measurement of intensity of rate of flow of electrons in an electric circuit. An ampere (amp) is the amount of current that will flow through a resistance of one ohm under a pressure of one volt. Ampere is often abbreviated as "A". 480V, 100kA interrupting rating branch circuit fuses that are size rejecting to eliminate overfusing. The fuse diameter is 1332" while the length varies from 1516" to 214". These are available in ratings from 1A through 60A. Amp Rating Class H Fuses The current-carrying capacity of a fuse. When a fuse is subjected to a current above its amp rating, it will open the circuit after a predetermined period of time. 250V and 600V, 10kA interrupting rating branch circuit fuses that may be renewable or non-renewable. These are available in amp ratings of 1A through 600A. These are high performance fuses rated 1 10-600A in 250V and 600V ratings. All are marked "Current Limiting" on their label and all have a minimum of 200kA interrupting rating. They have identical outline dimensions with the Class H fuses but have a rejection feature which prevents the user from mounting a fuse of lesser capabilities (lower interrupting capacity) when used with special Class R Clips. Class R fuses will fit into either rejection or non-rejection clips. Amp Squared Seconds, l2t Class J Fuses The measure of heat energy developed within a circuit during the fuse's clearing. It can be expressed as "melting l2t", "arcing l2t" or the sum of them as "Clearing l2t". "l" stands for effective let-through current (RMS), which is squared, and "t" stands for time of opening, in seconds. These fuses are rated to interrupt a minimum of 200kA AC. They are labeled as "Current-Limiting", are rated for 600Vac, and are not interchangeable with other classes. Class T Fuses An industry class of fuses in 300V and 600V ratings from 1A through 1200A. They are physically very small and can be applied where space is at a premium. They are fast acting fuses with an interrupting rating of 200kA RMS. Class K Fuses Classes of Fuses The amount of time from the instant the fuse link has melted until the overcurrent is interrupted, or cleared. These are fuses listed as K-1, K-5, or K-9 fuses. Each subclass has designated I2t and lp maximums. These are dimensionally the same as Class H fuses, and they can have interrupting ratings of 50k, 100k, or 200kA. These fuses are current-limiting. However, they are not marked "current-limiting" on their label since they do not have a rejection feature. Breaking Capacity Class L Fuses Clearing Time (See Interrupting Rating) These fuses are rated for 601 through 6000A, and are rated to interrupt a minimum of 200kA AC. They are labeled "Current-Limiting" and are rated for 600Vac. They are intended to be bolted into their mountings and are not normally used in clips. Some Class L fuses have designed in time-delay features for all purpose use. The total time between the beginning of the overcurrent and the final opening of the circuit at rated voltage by an overcurrent protective device. Clearing time is the total of the melting time and the arcing time. Arcing I2t Value of the I2t during the arcing time under specified conditions. Arcing Time Cartridge Fuse A fuse consisting of a current responsive element inside a fuse tube with terminals on both ends. Class CC Fuses 600V, 200kA interrupting rating, branch circuit fuses with overall dimensions of 13 32" x 112". Their design incorporates a rejection feature that allows them to be inserted into rejection fuse holders and fuse blocks that reject all lower voltage, lower interrupting rating 1332" x 112" fuses. They are available from 110A through 30A. 432 The industry has developed basic physical specifications and electrical performance requirements for fuses with voltage ratings of 600V or less. These are known as standards. If a type of fuse meets the requirements of a standard, it can fall into that class. Typical classes are K, RK1, RK5, G, L, H, T, CC, and J. Current Limitation A fuse operation relating to short circuits only. When a fuse operates in its current-limiting range, it will clear a short circuit in less than 12 cycle. Also, it will limit the instantaneous peak let-through current to a value substantially less than that obtainable in the same circuit if that fuse were replaced with a solid conductor of equal impedance. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Application Guide Glossary Dual Element Fuse Melting I2t Peak Let-Through Current, lp Fuse with a special design that utilizes two individual elements in series inside the fuse tube. One element, the spring actuated trigger assembly, operates on overloads up to 5-6 times the fuse current rating. The other element, the short circuit section, operates on short circuits up to their interrupting rating. Value of the I2t during the melting time of the fuse link under specified conditions. The instantaneous value of peak current let-through by a current-limiting fuse, when it operates in its current-limiting range. Electrical Load "NEC(R)" Dimensions That part of the electrical system which actually uses the energy or does the work required. These are dimensions once referenced in the National Electrical Code. They are common to Class H and K fuses and provide interchangeability between manufacturers for fuses and fusible equipment of given ampere and voltage ratings. Fast-Acting Fuse A fuse which opens on overload and short circuits very quickly. This type of fuse is not designed to withstand temporary overload currents associated with some electrical loads. Fuse An overcurrent protective device with a fusible link that operates and opens the circuit on an overcurrent condition. High Speed Fuses Fuses with no intentional time-delay in the overload range and designed to open as quickly as possible in the short-circuit range. These fuses are often used to protect solid-state devices. Inductive Load An electrical load which pulls a large amount of current--an inrush current-- when first energized. After a few cycles or seconds the current "settles down" to the full-load running current. Melting Time The amount of time required to melt the fuse link during a specified overcurrent. (See Arcing Time and Clearing Time.) Resistive Load An electrical load which is characteristic of not having any significant inrush current. When a resistive load is energized, the current rises instantly to its steady-state value, without first rising to a higher value. RMS Current The unit of measure for electric resistance. An ohm is the amount of resistance that will allow one ampere to flow under a pressure of one volt. The RMS (root-mean-square) value of any periodic current is equal to the value of the direct current which, flowing through a resistance, produces the same heating effect in the resistance as the periodic current does. Ohm's Law The relationship between voltage, current, and resistance, expressed by the equation E = IR, where E is the voltage in volts, I is the current in amps, and R is the resistance in ohms. One Time Fuses Generic term used to describe a Class H non-renewable cartridge fuse, with a single element. Overcurrent Interrupting Rating -- IR Overload (Breaking Capacity) Can be classified as an overcurrent which exceeds the normal full load current of a circuit. Also characteristic of this type of overcurrent is that it does not leave the normal current carrying path of the circuit--that is, it flows from the source, through the conductors, through the load, back through the conductors, to the source again. SCCR See Short-Circuit Current Rating Semiconductor Fuses Fuses used to protect solid-state devices. See "High Speed Fuses." Short-Circuit Can be classified as an overcurrent which exceeds the normal full load current of a circuit by a factor many times (tens, hundreds or thousands greater). Also characteristic of this type of overcurrent is that it leaves the normal current carrying path of the circuit--it takes a "short cut" around the load and back to the source. Short-Circuit Current Rating (SCCR) The maximum short-circuit current an electrical component can sustain without the occurrence of excessive damage when protected with an overcurrent protective device. Short-Circuit Withstand Rating Same definition as short-circuit rating. For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 433 Services & Application Guide (See Interrupting Rating) The rating which defines a fuse's ability to safely interrupt and clear short circuits. This rating is much greater than the ampere rating of a fuse. The NEC(R) defines Interrupting Rating as "The highest current at rated voltage that an overcurrent protective device is intended to interrupt under standard test conditions." A fuse in which the element, typically a zinc link, may be replaced after the fuse has opened, and then reused. Renewable fuses are made to Class H standards. Ohm A condition which exists on an electrical circuit when the normal load current is exceeded. Overcurrents take on two separate characteristics--overloads and short circuits. Interrupting Capacity Renewable Fuse (600V & below) Application Guide Glossary Single-Phasing That condition which occurs when onephase of a three-phase system opens, either in a low voltage (secondary) or high voltage (primary) distribution system. Primary or secondary singlephasing can be caused by any number of events. This condition results in unbalanced currents in polyphase motors and unless protective measures are taken, causes overheating and failure. Out-of-Stock Substitution/Upgrades Cooper Bussmann # AGC-(AMP) Upgrade # ABC-(AMP) Description FAST-ACTING, 14" X 114" FUSE Data Sheet # 2001 AGC-V-(AMP) ABC-V-(AMP) FAST-ACTING, 14" X 114" FUSE WITH LEADS 2001 AGU-(AMP) LP-CC-(AMP) FAST-ACTING, 1332" X 112" FUSE 2008 BAF-(AMP) LP-CC-(AMP) FAST-ACTING, 1332" X 112" FUSE 2011 BAN-(AMP) LP-CC-(AMP) FAST-ACTING, 1332" X 112" FUSE 2046 FNM-(AMP) LP-CC-(AMP) TIME-DELAY, 1332" X 112" FUSE 2028 FNQ-R-(AMP) LP-CC-(AMP)* TIME-DELAY, 500V, 1332" X 112" FUSE 1012 FNR-R-(AMP) LPN-RK-(AMP)SP TIME-DELAY, 250V, CLASS RK5 FUSES 1019/1020 FRS-R-(AMP) LPS-RK-(AMP)SP TIME-DELAY, 600V, CLASS RK5 FUSES 1017/1018 JKS-(AMP) LPJ-(AMP)SP FAST-ACTING, 600V, CLASS J FUSE 1026/1027 Threshold Current KLU-(AMP) KRP-C-(AMP)SP TIME-DELAY, CLASS L FUSE 1013 The symmetrical RMS available current at the threshold of the current-limiting range, where the fuse becomes current-limiting when tested to the industry standard. This value can be read off of a peak let-through chart where the fuse curve intersects the A-B line. A threshold ratio is the relationship of the threshold current to the fuse's continuous current rating. KTK-(AMP) KTK-R-(AMP) FAST-ACTING, 600V, 1332" X 112" FUSE 1011 KTK-R-(AMP) LP-CC-(AMP) FAST-ACTING, 600V, CLASS CC FUSE 1015 KTN-R-(AMP) LPN-RK-(AMP)SP FAST-ACTING, 250V, CLASS RK1 FUSE 1043 KTS-R-(AMP) LPS-RK-(AMP)SP FAST-ACTING, 600V, CLASS RK1 FUSE 1044 KTU-(AMP) KPR-C-(AMP)SP FAST-ACTING, 600V, CLASS L FUSE 1010 MDL-(AMP) MDA-(AMP) TIME-DELAY, 14" X 114" FUSE 2004 MDL-V-(AMP) MDA-V-(AMP) TIME-DELAY, 14" X 114" FUSE WITH LEADS 2004 Time-Delay Fuse A fuse with a built-in delay that allows temporary and harmless inrush currents to pass without opening, but is so designed to open on sustained overloads and short circuits. MTH-(AMP) ABC-(AMP) FAST-ACTING, 14" X 114" FUSE NON-(AMP) LPN-RK-(AMP)SP GENERAL PURPOSE, 250V, CLASS H FUSES 1030 NOS-(AMP) LPS-RK-(AMP)SP GENERAL PURPOSE, 600V, CLASS H FUSES 1030 REN-(AMP) LPN-RK-(AMP)SP 250V RENEWABLE FUSELINK 1028 RES-(AMP) LPS-RK-(AMP)SP 600V RENEWABLE FUSELINK 1028 1033 SL-(AMP) S-(AMP) TIME-DELAY, 125V, PLUG FUSE TL-(AMP) T-(AMP) TIME-DELAY, 125V, PLUG FUSE 1035 W-(AMP) TL-(AMP) TIME-DELAY, 125V, PLUG FUSE 1035 *Not recommended for control transformer circuits. Total Clearing I2t Total measure of heat energy developed within a circuit during the fuse's clearing of a fault current. Total Clearing I2t is the sum of the melting I2t and arcing I2t. Voltage Rating The maximum open circuit voltage in which a fuse can be used, yet safely interrupt an overcurrent. Exceeding the voltage rating of a fuse impairs its ability to clear an overload or short circuit safely. Withstand Rating The maximum current that an unprotected electrical component can sustain for a specified period of time without the occurrence of extensive damage. 434 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Application Guide Industrial Fuse Applications Industrial Applications 1. Interior Lighting 2. Computer Power 3. Switchboards 4. Motor Control Center 5. Emergency Lighting 6. UPS Backup Power Supplies 7. Transformer/Emergency Generator 8. Forklift Battery Charging Station 9. HVAC Chillers/Blowers 10. Welding Circuits 11. Plant Lighting 12. Distribution Panels 13. Disconnect Switches 14. Programmable Logic Circuits 15. Conveyor System 1 2 3 8 7 5 6 4 9 12 10 11 13 15 14 Commercial Applications 1 3 2 5 4 7 6 8 9 10 11 1. Interior Lighting 2. HVAC Blowers 3. Computer Power 4. Branch Circuits 5. Emergency Lighting 6. Load Centers 7. Disconnect/Distribution Panels 8. HVAC/Chillers 9. Switchboards/Motor Control Centers 10. UPS Backup Power Supplies 11. Elevator Control Centers 12. Transformer/Emergency Generator 12 Services & Application Guide 435 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 435 Index Catalog Number Index Catalog Number Page 1025 * 11 Type 400 11239 275 11240 275 11241 275 11242 275 11675299 11725299 11960 * 13195 * 13926 * 14002301 14004301 15087 398 15100 394 15149 329 15188308 15200 394 15242 * 15288308 15506 * 15515 * 15595 * 15600 * 15602 * 15660 * 15800 392 15900 * 15968 * 160___ 299, 300 162___ 299, 300 162__-_UL * 163__ 297-298, 299-300 163__-_UL * 164___ * 165___ 299, 300 1683A75H08 * 170E_ _ _ _ 173-177, 180-184 170F_ _ _ _ 178-179 170H_ _ _ _ 185-186 170L * 170M_ _ _ _ 117-172 170N * 170R * 170T * 171A * 17415 * 175GDMSJD * 175GXQNJD * 1768A40H * 19315 * 19320 * 1976 * 1A0065 91 1A0835 * 1A111968 1A112068 1A1310 * 1A1360 * 1A1478 * 1A1837 * 1A1838 * 1A1853 * 1A190768 Catalog Number 1A2294 1A2650 1A33981A33991A34001A3746 1A45331A45341A4544 1A4708 1A4806 1A50181A5041 1A5220 1A56001A56011A56021A5603 1A5778 1A5779 1A5780 1A5940 1A6004 1A6049 1A8654 1A9619 1B0021 1B0048 1B0049 1B0089 1BR021 1BR048 1BS1_ _ _ 1CIF 2004 2081 20BS 20LSC 21010 21040 21050 21065 21100 21200 2127 2177 2178 2201 2245 2322 24 Type 2429 2430 2432 246B9949BG 2487 2494 2499 25499 2601 2602 2604 2605 2607 Page * * 68 67 69 * 68 68 * * * 67 * * 69 67 67 * 69 69 69 * * * * * * * * 271 * * 113, 186 * * * 235 235 * * * * * * * * * * * * 400 * * * * * * 288 * * * * * * Catalog Number 2608 2610 2611 2650 2654 2698 270303 2714 2772 2778 2795 2833 2834 2837 2838 2839 2860 2960 2989 2992 2A066 2A1279 2A8 30LSC 323A2433P6 32BS 3356 3373 3375 3411 3429 3434 3512 3513 3515 3519 3520 3521 3525 3528 3531 353837 3544 3545 3552 3553 3554 3555 3556 3562 3569 3571 3572 3575 3576 3578 3580 3591 3594 3595 3604 3723 3742 3743 Page * * * * * * 91 * * * * * * * * * * * * * * 295 * 235 * 235 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 290 290 290 Catalog Number 3794 3823 3828 3833 3835 3839 3959 3998 39E 4070 4121 4164 4178 4180 4202 4207 4261 4287 4386 4393 4399 4402 4405 4406 4407 4408 4410 4411 4412 4413 4415 4421 4422 4423 4427 4428 4467 4482 4483 4512 4513 4514 4515 4520 4522 4525 4528 4529 4530 4532 4534 4535 4537 4561 4567 4574 4586 4648 4909 510 51215 51235 558730 5591- Page * * 289 * 290 * * * * * * 52 * * * * * * * 289 * * 288 288 * * * * * * * 290 * * * * * * * * * * 290 289 * * * * * * * * * * * 288 * * * * * * * 70 Catalog Number 55925623 567256745678 568156825950 59565958 59605961 5TPH 60/100BS 60/100LSC 6125 6125TD 6374 63A-DUMMY 64 _ _ _ 6415 6417 6418 6419 6420 64200 6422 6424 6427 64913 64926 6525-25-0341 65372 65398 6725 675 68_ _ _ 68100 7 Type 70 Series 7071-0192 72 74 Type 75 Type 76 Type 80 Type 80910 81 Type 82048 8414677 84345 8456A85H 847966108 8583A36H 8588A81H 88914568 9078A67G04 9435 9483 9732 9789 9834 9835 Page 70 * 70 70 * 70 70 * 70 * 70 * 414 235 235 * * * * 46 * * * * * * * * * * * * * * * * 46 * 400 398 398 * * 400 401 401 401 * 401 * * * * * * * * 91 * * * * * * * Not listed in this catalog. Call Cooper Bussmann Customer Satisfaction for more information. Call 636-527-3877. 436 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 436 Index Catalog Number Index Catalog Number * * * * 91 * 91 91 * 225 63 85 63 85 85 * * 79, 85 226 * * * * * * 226 * 81 79 84 * * * 62 62 63 63 * * 62 62 * * 258 * * * * 79, 85 52 52 * * 55 55 55 * 55 55 55 247 247 * * Catalog Number B83 B84 B93 BAF BAN BAO BBS BBU BBU-EFID BC (fuse blocks) BC (fuses) BCA603 BCBC BCBD BCBS BCC BCCM BCF BD (fuses) BD (switches) BDF BDFLNF100 BDFLNF175 BDFLNF200 BDFLNF30 BDFLNF400 BDFLNF60 BDFLNF600 BDNF1200 BDNF1600 BDNF2000 BDNF3150 BDNF600 BDNF800 BFW BG BGH BH- _ _ _ _ 113, BH-_ xxx BM BMA603 BNQ21-WH BP655 BQE BQQ41-WH BRT BRW C08G C08M C08NL C10G C10M C10NL C14G C14G_S C14M C14M_S C14NL C19 C22G C22G_S C22M C22M_S C22NL Page * * * 47 * 225 50 89-90 * 274 226 273 245-246 245-246 245-246 * 274 * 226 244 * 369-370 369 369-370 369-370 369 369-370 369 367-368 367-368 367-368 367-368 365-366 365-366 * 274 * 225, 275 113, 186 274 273 311 * 311 311 * * 232 233 258 232 233 * 232 234 233 234 258 * 232 234 233 234 258 Catalog Number C2617 C2791 C2909 C30BS C30F C30FBS C4044 C4534 C4559 C515 C517 C518 C519 C520 C5237 C5268C5898 C60BS C60F C60FBS C6344 C7018 C7019 C7020 C7021C7024CAV CAVH CB203107S2105 CB3 CB5 CBB CBC CBF CBP CBPUB-ES-ED1H CBPUB-ES-ED2H CBPUB-ES-ED30H CBPUB-ES-ED31H CBPUB-ES-ED32H CBPUB-ES-ED33H CBPUB-ES-ED34H CBPUB-ES-ED35H CBPUB-ES-ED36H CBPUB-ES-ED3H CBS CBSV-ES-ED1 CBSV-ES-ED3 CBSV-ES-ED4 CBSV-ES-ED5 CBSV-ES-ED6 CBSV-ES-EN1 CBSV-ES-EN2 CBSV-ES-EN3 CBSV-ES-EN4 CBSV-ES-EN5 CBSV-ES-EN6 CBSV-ES-EN7 CBSV-ES-EN8 CBSV-ES-TEHP CBSV-ES-TELP CBSV-ES-TEMP CBSV-SC-EN8 CBT Page * * * 235 235 235 * * * 58 58 58 58 58 * 113 * 235 235 235 * * * * 403 404 79, 85 79, 85 * * * * * * * 421 421 421 421 421 421 421 421 421 421 * 421 421 421 421 421 418 418 418 418 418 418 418 418 422 422 422 419-420 * Catalog Number Page CBTR-ES-1DA 421 CBTR-ES-1HP 421 CBTR-ES-2HP 421 CBTR-SC-1HP 421 CBTR-SC-2HP 421 CBU * CCB * CCC * CCE * CCG * CCP326-329 CCSK-45 410 CD 226 CD1 * CD100 * CD27 * CD33 * CDB * CDC * CDN (fuses) 219 CDNF100 352-355, 356-358, 371 CDNF16 352-355, 356-358 CDNF160 359-360, 371 CDNF200 361-362, 371 CDNF25 352-355, 356-358 CDNF30 352-355, 356-358, 371 CDNF32 352-355, 356-358 CDNF400 363-364 CDNF45 352-355, 356-358 CDNF60 352-355, 356-358, 371 CDNF63 352-355, 356-358 CDS 219 CDS6 * CDS8 * CDS9 * CDSS 338 CEO 225 CFD100 334-336, 344-346 CFD200 337-339, 346 CFD30 331-333, 344-346 CFD60 334-336, 344-346 CFD600 346 CFD800 346 CFZ * CGL 220 CH30J_ 254 CH30J_I 254 CH60J_ 254 CH60J_I 254 CH08 258 CH10 * CH10CL * CH10CM * CH14 258 CH14-HP 258 CH14MS-_D 258 CH22 258 CH810-HP 258 CHCC 257 CHM 257 CH-PLC 258 CHPV 257 CIF 221 CIH 223 Catalog Number CIK CIL CJ CL1 CM__CF CM__F CM__FC CP14002 CPB16 _ CPDBCPS-C CT CUG _D125 _D16 _D27 _D33 DCM DD DEO DFC DFJ DIA DLN-R DLS-R DRA-1 DRA-2 DRLC-A E-6188 EBI055EC-_ _ _ ECF ECL055ECL155ED EDA EDN EET EF EFC30 EFC60 EFF EFH EFJ100 EFJ200 EFJ30 EFJ400 EFJ60 EFJ600 EFJ800 EFL800 EFS EK ELN EN6 ENA ENF100 ENF1200 ENF125 ENF16 ENF1600 ENF200 ENF2000 ENF25 Page 223 223 222 195 235 225 225 * 296, 299-300 296-297, 299-300 * 191-192 * 227 227 227 227 47 226 225 * 97 * 34 34 413 413 * * * 195 * 76 77 226 40 40 191-193 226 378-380 378, 380 * * 378-380 378-380 378-380 378-380 378-380 378-380 378-380 379-380 226 * * * * 381-383 381-383 381-383 381-383 381-383 381-383 381-383 381-383 * Not listed in this catalog. Call Cooper Bussmann Customer Satisfaction for more information. Call 636-527-3877. 437 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 437 Services & Application Guide 9838 9841 9843 A3354705 A3354710 A3354720 A3354730 A3354745 A404302 AAO ABC ABCNA ABC-V ABFNA ABGNA ABS ABU ABWNA AC ACB ACF ACH ACK ACL ACO AD ADL ADLSJ ADMNA ADOSJ AF AFS AFX AGA AGA-V AGC AGC-V AGS AGU AGW AGX AGX-V AGY AL-D ALS ALW AMG AMI AMWNA ANL ANN ASZ350B3 AT ATC ATC-_ID ATC-FHID ATF ATM ATM-_ID ATM-FHID B221 B222 B40 B48 Page Index Catalog Number Index Catalog Number ENF30 ENF3150 ENF32 ENF400 ENF45 ENF60 ENF600 ENF63 ENF800 ENN EP ERK-28 ERS2 ERS30 ESD ET ETF EVF F01A F02A F02B F03A F03B F06A F07A F09A F09B F10A F15A F15B F16A F16B F19B F29A F38 F380 F60C F61C F62C F63C F64C F65C F7036FA02 FA2A FA4H FBI FBM FBP FC FCB FCC FCU FD200 FD400 FD600 FD800 FDM FE FE2475FEE FEH FF FG Page 381-383 381-383 381-383 381-383 381-383 381-383 381-383 381-383 381-383 * * 411 * * 225 191-192 * * * * * * * * * * * * * * * * * * 402 * * * * * * * * * * * 66 66 * * * * * 344 340-344 340-343, 346 340-343, 346 * 191-192, 194 * 191-192, 194 * 226 226 Catalog Number Page FH2 * FHL * FHN * FL* FL11H_ 88 FL11K__ 88 FL11N * FL11T__ 88 FL12K__ 88 FL1A5 * FL3H * FL3K__ 88 FL3T__ 88 FLB * FLD * FLF * FLM * FLN * FLS * FM 191-192, 194 FM01A * FM08A * FM09A * FM09B * FMM 191-192, 194 FMX * FNA 51 FNJ * FNM 49 FNQ 49 FNQ-R 18 FNW * FP-_ 414 FR-1000 * FRN-R 35 FRN-R-__ID 35 FRS-R 36 FRS-R-__ID 36 FSD * FT-_ 414 FTI * FTM * FWA 98-101, 197-198 FWC 205-206 FWH 104-105, 201-204 FWJ 111-112, 213-214 FWK 211-212 FWL 215 FWP 207-210 FWS 215 FWX 102-103, 199-200 G30060 274 GBA 51 GBB 63 GBB-V 63 GBC * GDA 59 GDA-V 59 GDB 59 GDB-V 59 GDC 60 GDC-V 60 GF 226 GFA * Catalog Number GG GH GKB GKJ GLD GLH GLN GLP GLQ GLR GLX GMA GMA-V GMC GMC-V GMD GMD-V GMF GMQ GMTGMT-A GMW GOB GRF GSK-260 H07C H25_ H60_ HAC-R HAS-R HBC HBH-I HBH-M HBM HBO HBPHBSHBV-I HBV-M HBW-I HBW-M HCHC1 HC2 HC3 HC7 HC8 HCM HEB HEC HEF HEG HEH HEJ HET HEX HEY HFA HFB HGA HGB HGC HHB HHC Page 226 226 * * 51 * * 235 53 54 * 61 61 61 61 61 61 54 53 399 399 * * 54 410 224 260-262 263-265 * * * 66 66 * * * * 66 66 66 66 * * * * * * * 279-280 279 * 279 279 279 279 279 279 278 277 * * * 277 56 Catalog Number HHD HHF HHG HHI HHJ HHL HHM HHT HHX HIF HJL HJM HKA HKL HKP HKQ HKR HKT HKU HKX HLA HLD HLQ HLR HLS HLT HME HMF HMG HMH HMI HMJ HMK HMR HN-1 HN-3 HN-5 HOB HOF HPC-D HPD HPF HPG HPL HPM HPS HPS2 HRE HRF HRG HRH HRI HRJ HRK HSK HTBHTC-10M HTC-140M HTC-15M HTC-200M HTC-210M HTC-30M HTC-35M HTC-40M Page 56 56 56 278 278 56 56 278 56 * 285 * * 285 282 * 285 285 285 285 * 285 53 54 399 399 278 278 278 278 278 278 * * * * * * * 287 286 286 286 * 287 286 287 278 278 278 278 278 278 277 * 283-284 * 67 67 67 67 * 281 281 Catalog Number HTC-45M HTC-50M HTC-55M HTC-60M HTC-65M HTC-70M HVA HVB HVJ HVL HVR HVT HVU HVW HVX HWA IXL70F J-_ _ J101/J J201/J J301/J J60__ J70032 J70100 JA600 JB1 JB3 JCA JCDJCEJCGJCHJCIJCKJCK-AJCK-BJCLJCL-AJCL-BJCM JCN JCP JCQJCR-A JCR-BJCTJCUJCWJCXJCYJCZJDN JDZJF1 JJNJJSJKS JN JP600 JPA-3 JSK-36 JT JTN JU Page 65 65 281 65 65 281 87 87 87 87 87 87 87 87 87 * * 415 * * * 266-267 216 216 268 * * * 78 * 80, 82 80-81 78 80-81 80-81 80-81 80-81 80, 82 80, 82 * * * 78 80, 82 80, 82 78 74-75 78 74 74 74-75 * 74-75 * 38 39 24 * 268 * 410 255-256 255-256 * * Not listed in this catalog. Call Cooper Bussmann Customer Satisfaction for more information. Call 636-527-3877. 438 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 438 Index Catalog Number Index Catalog Number 258 224 * * 106 * * * * * * 52 107 * * * * * * 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 * * * 46 46 46 46 46 46 * * * * * * * Catalog Number KGS-A KGT KGX KGY KIG KJA KJB KLC KLM KLP KLU KMH-C KOS15 KPF KQO KQT KQV KQW-M KRP-C__SP KRP-CL KS-19392-L36 KT3KT4KTE KTJ KTK KTK-R KTN-R KTN-S KTQ KTS-R KTS-S KTU KU KUH KURL KUSC KUX KUXRL KUXSC KWN-R KWS-R L09C L14C LA LA8D324 LAA LAC LAG LAN LAR LCT LCU LD1 LD2 LEF LET LKB LKC LKN LKS LMMT LMT LP-CC Page * * * * 46 * * * 47 * 28 * * 46 46 46 46 * 26-27 27 * 310 310 * * 47 19 32 * 50 * * 28 321 321 321 321 321 321 321 * 33 224 224 * * * * * * * 188-189 * * * * 188-189 * * * * 188, 190 188, 190 17 Catalog Number LPF1LPJ__SP LPJ__SPI LPN-RK__SP LPN-RK__SPI LPRK-28 LPS-RK__SP LPS-RK__SPI LPT LS1D3 M09C M14C MAI MAS MAXMAX-__ID MBMBO MC_ _ _ MCRW MDA MDA-V MDF MDL MDL-V MDM MDQ MDQ-V MDX MFN MIC MIJ MIN MIS MKA MKB MKG MMB MMT MPR MS100 MSK-45 MSL MSW710 MT MT12 MTC6 MTH MTMU MV055MV155N512-BK NBB NBC NBE NC3ND-1260 NDN111NDN1A-WH NDN1-WH NDN3NDN63NDNA100 NDNA200 Page 291 23 23 29-31 29-31 411 29-31 29-31 * * 224 224 195 * 55 55 42 * 195 * 64 64 * 64 64 * 64 64 * * 51 * 51 52 * * * * 191-193 * * 410 * * 191-193 * * * * 73 73 306 * * * 307 * 305 305 305 304 304 305 305 Catalog Number NDNAS NDND1 NDNF1-WH NDNFD1-WH NDNLFD1-WH NDNV4NFA NFT2NFT3NFTA _NHG _ _ _ B NI NITD NNB NNB-R NNC NO.1 NO.100 NO.140 NO.15 NO.2 NO.201 NO.204 NO.205 NO.213 NO.213-R NO.216 NO.216-R NO.220 NO.226 NO.226-R NO.242-R NO.2621 NO.2621-R NO.263 NO.263-R NO.2641 NO.2641-R NO.2642 NO.2661-R NO.2662-R NO.2664-R NO.270 NO.2880 NO.36 NO.4 NO.5 NO.6 NO.616 NO.616-R NO.626 NO.626-R NO.642-R NO.663 NO.663-R NO.7 NO.8 NON NOS NPL NRA NSD NSE3-WH NSS3- Page 305 * 291 291 291 304 * 306 306 305 228-231 235 225 415 415 415 413 * 412 * 413 * * * 415 415 415 415 412 415 415 415 415 415 415 415 415 415 415 415 415 415 412 * 411 413 413 413 415 415 415 415 415 415 415 413 413 25 25 * 305 225 307 307 Catalog Number Page NTN-R415 NTQ23-WH 311 NTS-R415 NUE * NXA * NXC * __NZ01 227 __NZ02 227 OEFMA 86 OEGMA 86 OHFMA 86 OHGMA 86 OIA * OJ * OLGMA 86 OPM-1038 250-251 OPMNGSA 252-253 OPMNGSAAUX 252-253 OPM-NG-SC3 252-253 OPM-NG-SM3 252-253 OSD 225 OSP * P41 P09C 224 P11C 224 PCB * PCC * PCD * PCF * PCG * PCH * PCI* PCT 399 PDB___ 296 PDBFS___ 295 PF1 274 PF1291 PLK3-WH 310 PLU11-WH 309 PLU111-WH 309 PLU1-WH 309 PLU3309 PMP 240-241 PON 219 PS 240-241 PS1RPLSW * PSU11-WH 309 PSU111-WH 309 PSU1-WH 309 PV48 PVS-R 37 QC202/J * QC203/J * Quik-Spec AC Safety Switches Switches 245-246 Quik-Spec Coordination Panelboards 238-239 Quik-Spec DC Safety Switches 242 Quik-Spec Solar Combiner Boxes 243-244 R11C 224 R25_ 260-262 R60_ 263-265 * Not listed in this catalog. Call Cooper Bussmann Customer Satisfaction for more information. Call 636-527-3877. 439 For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 439 Services & Application Guide JV-L K07C KAA KAB KAC KAD KAF KAJ KAL KAW KAX KAZ KBC KBD KBJ KBO KBR KBT KBY KCA KCB KCC KCD KCE KCF KCH KCJ KCM KCM-B KCR KCS KCV KCY KCZ KDA KDB KDC KDD KDE KDF KDH KDJ KDM KDP KDR KDT KDU KDY KEF KEM KER KEW KEX KFH-A KFM KFT KFZ KGC KGJ KGJ-A KGJ-E KGL KGO-E KGS Page Index Catalog Number Index Catalog Number REG REN RES RFI RFL RK1SK-39 RK5SK-39 RLA RLC RYA RYC SS3Holder S500 S500-V S501 S501-V S504 S505 S505-V S506 S506-V S-8001 S-8002 S-8101 S-8102 S-8201 S-8202 S-8203 S-8301 SASAMISB SC SCV15 SCV20 SCY SDA SDLSJ SDMSJ SDQ SDQSJ SEW-5B SF25H SFB1030 SFC-FUSE-CAB SFC-SHELF SFD27 SFE SFLSJ SFMSJ SFQSJ SFR SFR1 SKA SKLSJ SLSM363 SNF-7K SNF-7M SNL-7K SOA72 SOU SOW 440 Page Catalog Number * * * * * 410 410 * * * * 41 * 59 59 59 59 * 59 59 60 60 288 288 288 288 288 288 288 288 42 259 186 22 * * 276 * * * * * * * * 414 414 * * * * * * * 276 * 40 * * * * 305 276 276 SOX SOY SPJ SPP SRA-R SRD SRT-A SRU SRU-BC SRW SRX SRY SSD SSN SSU SSW SSX SSY STD STI STM STY SYC SZQ TT1320-2R T30__ T60__ TB100TB200TB200HBTB300TB345TB400TC TCF TCF__RN TCFH__N TCP TDC TDC10 TDC11 TDC180 TDC600 TDLEJ TDLSJ TDMEJ TDP TDQSJ TFC TFF TFL TFLSJ TFMEJ TFQSJ TGC TGH THL THLEJ THMEJ TIQ TJD TKLEJ TKMEJ Page 276 276 * * * * * 276 * 276 276 276 225 276 276 276 276 276 225 * * 276 * * 41 * 269-270 271-272 312-313 314-315 314-315 316-317 316-317 320 41 20-21 20-21 20-21 * * * * * * 84 84 84 * 84 * * * 84 84 84 * * * 84 84 * * 84 84 Catalog Number TLTP158HC TP15900 TP15900-4 TP15914 TPA TPA-B TPB TPC TPCDS TPH TPHCSTPJ TPLTPM TPMDS TPN TPS TPSFHTPW TPWDS TRF TSTVS TVSSTXLEJ TXMEJ TXQEJ UHA UHC UHJ UHS UHT UHW ULR VFNHA VKNHA WWDFHO WDLSJ WDOH6 WDOSJ WER WFFHO WFLSJ WFMSJ WFNHO WFOH6 WFOSJ WGA WHA WHN WIE WJON6 WKB WKFHO WKH WKJ WKK WKL WKLSJ WKMSJ WKNHO WKS Page 40 393 * 391 390 391 391 * 388 388 * 395 * 396 389 389 397 392 414 * * * 322-324 406 407 84 84 84 * * * * * * * 83 83 40 83 83-84 83 84 400 83 83 83 83 83 84 * * * * 83 * 83 * * * * 84 83-84 83 * Catalog Number WKU WKV WLF WMB WMM WMQ WPQ WQL WQN WQP WSE WSH WSL WSM WSP WSQ WST WSU WTJ WTK WTT WTZ WUC WUD WUE WUG WUH WUI WUQ WUR WUU WUV WUW WUY WVA WVQ WVR WWD WWE WWF WWG WWI WWK WWL WWU WWV WWX WYG WYM WZC WZJ WZK WZL WZX XL25X XL50F XL70F Page * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa Catalog Number Page Sales & Support Sales Support & Manufacturing Facilities North America - World Headquarters Asian Headquarters Cooper Bussmann 114 Old State Road Ellisville, Missouri 63021 Telephone: 636-527-3877 Fax: 800-544-2570 Email: fusebox@cooperindustries.com Cooper Electric (Shanghai) Co. Ltd. 955 Shengli Road Heqing Pudong, Shanghai 201201 China Telephone: 8621-2899-3888 Fax: 8621-2899-3997 Cooper Bussmann Mexico Poniente 148 No.933 Col. Industrial Vallejo Azcapotzalco C.P. 02300, Mexico D.F. Telephone: +52-55-5587-0211 Ext.720 Fax: +52-55-5567-1131 E-mail: ventasbussmannmexico@cooperindustries.com Cooper Bussmann Transportation 10955 SW Avery St. Tualatin, OR 97062 Telephone: 503-692-5360 Fax: 503-692-9091 E-mail: SurePower.Sales@cooperindustries.com Cooper Bussmann Electronics 1225 F Broken Sound Parkway NW Boca Raton, FL 33487 Telephone: 561-988-4100 Fax: 561-241-6640 E-mail: customerservice@cooperindustries.com Bussmann India Cooper Bussmann, India, Pvt. Ltd. 2, EVR Street, Sedarpet Indl. Estate, Pondicherry - 605 111 India Telephone: 91-413-267-2005 Fax: 91-413-267-8182 E-mail: sales.india@cooperindustries.com European Headquarters Cooper (UK) Ltd. Melton Road Burton-on-the-Wolds Leicestershire LE12 5TH England Telephone: 44-1509-882737 Fax: 44-1509-882786 E-mail: bule.sales@cooperindustries.com South American Headquarters Cooper Bussmann Brazil Bussmann do Brasil Ltda. Rodovia Santos Dumont, km 23 13.300-000, Caixa Postal 095 Itu Sao Paulo Brazil Telephone: 55-11-4024-8400 Fax: 55-11-40-24-8424 Services & Application Guide For product data sheets, visit www.cooperbussmann.com/datasheets/ulcsa 441