SUBMINIATURE -- SEALED DC Series Features G Enclosed switch complying with IP 6K7 G Silicon-free version available G Models available for operating temperatures up to 120C G Rated for currents up to 10 amp at 250VAC G Range of auxiliary actuators available (can also be retrofitted) G Various contact materials available, depending on application G Mechanical life: min. 1 x106 operations G Wide variety of connection options Thermoplastic actuating button Thermoplastic case and cover Silicon gasket Stainless steel spring Silver-nickel or gold crosspoint contacts NC terminal NO terminal Common terminal Electrical Ratings Electrical Life at Rated Load According to EN According to UL (Min. Operations) (Min. Operations) Switch Series EN61058 Rating UL1054 Rating DC1 DC2 DC3 DC4 6A, 250V~ 10(1.5)A, 250V~ 0.1A, 250V~ 3A, 250V~ 5A, 125/250VAC; 1A, 48VDC 10.1A, 125/250VAC; 1/4HP, 125VAC 0.1A, 125/250VAC 3A, 125/250VAC 10,000 10,000 50,000 50,000 6,000 6,000 6,000 6,000 Specifications Electrical Temperature Rating: Flammability Rating: -40 to +85C /+120C (without wire leads) -40 to +85C / +105C (with wire leads) UL94V-O (PET, PBT) UL94HB (POM) Materials Case: Actuator: Auxiliary Actuator: Terminals: Contacts: PET / PBT POM (T85), PBT (T120) Stainless Steel or Plastic Silver-Plated Copper-Zinc Silver Alloy (DC3 -- Gold Crosspoint) PBT = Polybutyleneterephthalate * PET = Polyethyleneterephthalate * POM = Polyacetal 21 Auxiliary Actuators inches (mm) L 0.03 (0.8) R 0.10 (2.5) o0.19 (o4.8) L 0.03 (0.8) Plastic Simulated Roller L 0.03 (0.8) L 0.03 (0.8) L 0.03 (0.8) o5 0.22 (5.6) 0.14 (3.5) R2 Plastic Roller 0.11 (2.9) Plastic Straight (85C Rated) 0.14 (3.5) 0.22 (5.5) 0.14 (3.5) L 0.03 (0.8) 0.14 (3.3) Roller Operating Point Rest Position 0.14 (3.5) Straight (120C Rated) Actuator Specifications Maximum Operating Force (cN) Actuator Code Switch Type DC1, DC3, DC4 DC2 AA 200 340 LB 80 150 LC 70 120 Maximum Pre-Travel inches (mm) DC1, DC3, DC4 DC2 0.04 (1.0) 0.18 (4.5) 0.20 (5.0) 0.04 (1.0) 0.20 (5.0) 0.22 (5.5) LD DC1, DC3, DC4 DC2 Minimum Over-Travel inches (mm) 0.330.01 (8.40.3) 0.420.05 (10.71.3) 0.440.06 (11.11.5) 0.330.01 (8.40.3) 0.420.06 (10.71.6) 0.440.07 (11.11.8) 0.02 (0.6) 0.06 (1.5) 0.06 (1.5) Max. Movement Differential inches (mm) Max. Rest Position inches (mm) Actuation Length inches (mm) 0.004 0.004 (0.10) (0.10) 0.02 0.03 (0.5) (0.7) 0.02 0.04 (0.6) (1.0) 0.37 (9.3) 0.55 (14.0) 0.59 (15.0) 0.02 (0.5) 0.02 (0.6) 0.03 (0.7) 0.04 (1.0) 0.75 (19.0) 0.79 (20.0) 0.02 (0.5) 0.02 (0.6) 0.03 (0.7) 0.04 (1.0) 0.75 (19.0) 0.79 (20.0) 0.02 (0.6) 0.03 (0.8) 0.02 (0.6) 0.02 (0.6) 0.02 (0.6) 0.03 (0.8) 0.02 (0.6) 0.02 (0.6) 0.59 (15.0) 0.67 (17.0) 0.59 (15.0) 0.75 (19.0) -- -- 0.189 (4.8) 0.276 (7.0) 1.654 (42.0) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.276 (7.0) 0.551 (14.0) 0.220 (5.6) 0.205 (5.2) DC1, DC3, DC4 DC2 forces and travel available upon request SB 90 160 SC 80 130 RB 90 160 RC 80 130 0.18 (4.5) 0.20 (5.0) 0.20 (5.0) 0.22 (5.5) 0.630.05 (16.01.3) 0.650.06 (16.41.5) 0.18 (4.5) 0.20 (5.0) 0.20 (5.0) 0.22 (5.5) 0.620.05 (15.81.3) 0.640.06 (16.21.5) SD 0.630.06 (16.01.6) 0.650.07 (16.41.8) 0.06 (1.5) 0.06 (1.5) forces and travel available upon request RD 22 Operating Point inches (mm) 0.620.06 (15.81.6) 0.640.07 (16.21.8) 0.06 (1.5) 0.06 (1.5) forces and travel available upon request WB 68 115 WC 50 85 VB 73 125 ZB 73 125 Specifications subject to change without notice. 0.18 (4.5) 0.24 (6.0) 0.18 (4.5) .018 (4.5) 0.18 (4.5) 0.24 (6.0) 0.18 (4.5) 0.18 (4.5) 0.440.06 (11.11.5) 0.480.07 (12.21.8) 0.470.06 (11.91.4) 0.630.06 (16.01.4) 0.440.06 (11.11.5) 0.480.07 (12.21.8) 0.470.06 (11.91.4) 0.630.06 (16.01.4) 0.08 (2.0) 0.12 (3.0) 0.08 (2.0) 0.06 (1.5) Terminal Options inches (mm) Dimensions inches (mm) QC 0.11 x 0.02 (2.8 x 0.5) Max. 30 Twisted o0.09 (o2.2) 0.26 (6.65) PCB 0.05 x 0.02 (1.3 x 0.5) Max. 30 Twisted 0.11 (2.73) 0.30 (7.5) PCB 0.02 x 0.02 (0.6 x 0.5) Max. 30 Twisted 0.26 (6.6) 0.09 (2.35) 0.09 (2.25) 0.24 (6.05) 0.27 (6.9) 0.10 (2.54) o0.07 (o1.8) o0.05 (o1.3) 0.24 (6.2) 0.30 (7.5) 0.19 (4.85) Solder Short Max. 30 Twisted 0.29 (7.3) 0.30 (7.7) max. max. 0.79 (20) 0.13 (3.2) Rest Position Operating Point 0.26 (6.5) PCB 0.02 x 0.02 (0.6 x 0.5) RH Side w/o Location Pins 0.30 (7.5) PCB 0.02 x 0.02 (0.6 x 0.5) RH Side with Location Pins 0.20 (5.16) 0.12 (3.0) Model with Connecting Leads 0.14 (3.5) 0.27 (6.75) 0.27 (6.75) Top Down View of Lateral Terminals Rest Position 0.3 (7.7) max. 0.26 (6.65) Type A PCB 0.02 x 0.02 (0.6 x 0.5) LH Side with Location Pins 0.27 (6.75) 0.14 (3.5) Drilling Pattern for PCB Terminals with Location Pins 0.05 x 0.02 (0.6 x 0.5) min. 19.69 (500) max. 0.78 (20) 0.30 (7.5) 0.20 (5.08) 0.20 (5.08) 0.14 (3.5) 0.20 (5.16) 0.38 (9.53) o0.06 (1.6) 0.30 (7.5) Type B 0.10 (2.54) min. 19.69 (500) Right 0.34 (8.6) max. COM Lead (Black) Left Cut-out PCB 0.02 x 0.02 (.06 x 0.5) LH Side w/o Location Pins 0.09 (2.25) 0.27 (6.9) NC Lead (Grey) Special Model Available with Tail Pedestal on Request ( 0.24 (6.05) NO Lead (Blue) 0.30 (7.5) o0.08 (o2.15) o0.05 (o1.3) 0.30 (7.5) 0.12 (3.0) 0.27 (6.75) Drilling Pattern for Lateral/Underside PCB Terminals w/o Location Pins 0.05 x 0.02 (0.6 x 0.5) 0.11 (2.73) Max. 30 Twisted 0.20 (5.08) 0.38 (9.53) 0.14 (3.5) Drilling Pattern for PCB Terminals 0.05 x 0.02 (1.3 x 0.5) Operating Point 0.19 (4.85) o0.09 (o2.2) 0.20 (5.08) 0.20 (5.08) 0.38 (9.53) 0.30 (7.5) o0.05 (1.3) 0.30 (7.5) 0.30 (7.5) Ordering Information DC 3 G B Series/Prefix Code UL Rating 1 5A,125/250VAC 2 10.1A, 125/250VAC 1/4HP, 125VAC 3 0.1A, 125/250VAC 4 4 3A, 250VAC EN 61058 Rating 6A, 250V~ 10(1.5)A, 250V~ 0.1A, 250V~ 3A, 250V~ Contact Configuration +105/120C Operating Temp +85C Operating Temp* Code Code A SPST NO E SPST NO B SPST NC F SPST NC C SPDT G SPDT *85C versions use plastic levers Notes: Wire leads 500mm min. (approximately 20 long) 1. Only available with terminal configuration 1. 2. +85C rated only. 3. Only available with DC1, DC3 and DC4. 4. Rating code 4 only as lead-version -- leads 0.5mm2. 5. Wire versions only rated to +105C. 6. Only available with terminal configuration 3 or 4. 3 L Code A B C H K L N P Q S T U D E M 7. 8. 9. 10. 11. Terminal Type inches (mm) Notes Short Solder 1 0.022 (0.52) Leads (No UL) 5, 9 2 2 0.03 (0.75 ) Leads (No UL) 5 0.05 x 0.02 (1.3 x 0.5) PCB 1 0.02 x 0.02 (0.6 x 0.5) PCB 1, 7 0.11 x 0.02 (2.8 x 0.5) QC 1 Without Leads (Type B) 6 Without Leads (Type A) 6 Without Leads (No Cut-Out) 8 Welding 1 Leads, 20 AWG 3, 11 Leads, 22AWG 9, 11 Non-European Versions Leads 18 AWG (UL Only) 5, 8, 10 Leads 16 AWG (UL Only) 5 Leads 20 AWG (UL Only) 3, 5 Code AA L R S V2 W2 Z2 Only available with terminal configuration 1, 6, 7, 8 or 9. Only available with terminal configuration 5. Only available with DC3 and DC4. Not available with DC2. Not available in North America. C Actuator Type Button only Lever Roller Simulated Roller Plastic Sim. Roller Plastic Straight Plastic with Roller Code 1 3 4 5 6 7 8 9 Code A -- -- -- -- -- -- -- Actuation Length inches (mm) B C D -- -- -- 0.189 (4.8) 0.276 (7.0) 1.654 (42.0) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.098 (2.5) 0.185 (4.7) 1.563 (39.7) 0.220 (5.6) -- -- 0.276 (7.0) 0.551 (14.0) -- 0.205 (5.2) -- -- Terminal Configuration 30 Twisted Leads on Actuator Side Leads on Opposite Side from Actuator Leads Attached to Underside PCB Terminals Right-hand Side PCB Terminals Left-hand Side PCB Terminals Right-hand Side with Location Pins PCB Terminals Left-hand Side with Location Pins Specifications subject to change without notice. 23