LS6 Series Illuminated Type LS6 Series LS6J Features LED Without LED 5.2 L x5.2W x2.5 H mm LS6J LED With LED 5.2 L x5.2W x2.5 H mm 1. 2 2. LED 1(1x1) 2(2 x11x2) (LED ) 3. 1. The compact size allows high layout flexibility, with the two different thicknesses available, permitting greater freedom of combination with other components, making set design simple. 2. LEDs are placed on each corner of the switch, in the following combinations: 1 LED (1 color X 1) or 2 LEDs (2 colors X 1 each or 1 color X 2). A switch without an LED is also available. 3. Refiow soldering is possible using a reflow furnace. Product code LS6 J 1 M - 1 R / T Series Thickness J2.5mm Operating force 11.18N 120gf 21.96N 200gf 32.74N 280gf Kind of switch spring M Switch LED(LED) Location and number of LED(s) LED()15No. Choose one number of the five code numbers from the illsutration below under for the desired location and number of LED(s). JLED This digit is not applicable to both J types without LED. LED(LED) Color of LED LED(LED) Color of another LED LED2 Applicable only to two LEDs version () LED (LS6J/ LED) Location and number of LED(s)(Applicable only to LS6J and U types) NO. Code No. Packing mode Non-codedBulk packing T() TTaping (standard mode) ()No.2No.4 2LED No.5 LED 1 2 LED1 2 ()Regarding both Code No. 2 and Code No. 4 in the left figure, the inner LED emits a long-wavelength color and the outer LED emits a short-wavelength color. Regarding Code No. 5, the LED on the observers' left emits a long-wavelength color and the other emits a short-wavelength color. The models other than the above such as 1-LED type and 2-LED 1-color type are not specified. 3 4 5 CITIZEN ELECTRONICS CO., LTD. JAPAN 2010.12 103 Applications LS6 TVVTR LUMISWITCH, LS6 series, can be used as a function control switch in the following applications. TV, VCR, audio equipment, automotive equipment, telecommunication equipment, facsimiles, telephone sets, car audio products etc. Outline drawing LS6J LED Without LED 3 5.2 1 2 4 o3.9 1 3 2 4 0.5 1.55 2 2.5 o2.3 Circuit diagram Unit : mm LS6J 1 4 2 5 3 6 5.2 LED With LED UR,HR Polarity is reversed on the UR and HR. o3.9 0.5 1.55 2 2.5 o2.3 1 4 2 5 3 6 Circuit diagram Unit : mm The following soldering patterns are recommended for reflow-soldering: For reflow soldering LED With LED 1.35 3.55 1.35 1.65 2.95 1.65 1.1 104 CITIZEN ELECTRONICS CO., LTD. JAPAN 2010.12 3.15 1.55 1.1 0.9 0.5 3.7 0.9 1.55 0.5 0.9 LED Without LED Absolute Maximum Rating Switch portion 12 20m LEDURHR LED portion (Except UR and HR) (Ta 25) Item Symbol Rating (mW) PD 65 (mA) IF 25 Pulse forward current (mA) IFP 100 Reverse voltage (V) VR 5 Power dissipation Forward current () Operating temperature range -30 +80 () -40+90 Storage temperature range IFP duty 1/10 0.1msec Conditions for IFP are pulse of 1/10 duty and 0.1msec width. Electro-optical and Mechanical Characteristics Switch portion (Ta 25) Switch operating force Item 1.18N 1.96N 2.74N DC12V 20mA 100m 100m or less 100M 100M or more AC250V 1 AC250V for one minute 20ms 20ms or less 0.2mm 1.180.39N 1.960.49N 2.740.59N Maximum rating Contact resistance Insulation resistance Withstanding voltage Bounce Stroke Operating force Operating life (times) 10 100,000 or more 5 50,000 or more 3 30,000 or more (Ta 25) LED LED portion Brightness Color variation Standard brightness R D Y YG G FG PG SR Red IF (mA) VF typ (V) 20 20 20 20 20 20 20 Red Orange Yellow Yellow green Green Fresh green Pure green Super brightness SD Orange Ultra brightness High brightness IV IF min typ (mA) (mcd) (mcd) max (V) P typ (nm) typ (nm) 2.2 2.2 2.1 2.2 2.2 2.2 2.2 2.6 2.6 2.6 2.6 2.6 2.6 2.6 700 605 589 570 567 560 557 100 40 40 30 26 26 24 20 20 20 20 20 20 20 0.7 2.9 3.1 5.0 2.4 2.0 0.8 1.5 8.2 7.3 17.3 9.4 5.8 2.2 20 2.0 2.6 650 40 20 1.9 5.2 20 2.0 2.6 630 40 20 1.5 8.1 UR Red 20 1.8 2.6 660 20 20 4.0 14.3 HR Red 20 1.8 2.6 660 20 20 8.6 28.6 NIST Per NIST standards Characteristics Iv-IF Iv-IF Characteristics VF-Ta VF-Ta Characteristics IF-VF IF-VF Characteristics 2.6 D 2.0 SR 5 1.8 D R R 10 Y 5 FG SR PG 3 2 SD Y G/PG/FG/SD D 100 50 SR 20 50 30 20 10 0 120 10 20 30 100 40 50 80 15 60 10 R 20 R 1 1.6 200 IFmax(mA) Iv(mcd) VF(V) 2.2 40 25 Y G/FG/PG SD 10 Directive Characteristics 30 SD 2.4 Y/G/FG IF (mA) IFmax-Ta IFmax-Ta Characteristics 500 G 20 SR Iv ( in) 50 30 3 Iv-Ta Iv-Ta Characteristics 50 100 5 60 60 70 40 80 20 70 80 PG 1 0.5 1.6 2.0 V F( V ) 2.4 2.8 -30 -20 0 20 40 T a(C) 60 80 100 1 2 3 5 IF(mA) 10 20 50 -30 -20 0 20 40 T a(C) 60 80 100 - 20 0 20 40 60 80 100 90 90 0 T a(C) CITIZEN ELECTRONICS CO., LTD. JAPAN 2010.12 105