TANTALUM MOLDED / RADIAL - MIL-C-49137/6 T370/T378 (CX06) MIL-PRF-49137/6 SERIES The KEMET Micron Series is available in a variety of case styles and sizes. They are designed to operate from -55C to +85C at full voltage and to +125C with derating. Typical applications include use in bypass coupling, filtering, and timing circuits. The KEMET Micron Series is qualified under MIL-PRF-49137/6 as military styles CX06 (T378 Series). The KEMET T370 Series is encapsulated in a molded gold color epoxy. This encasement technique allows maximum utilization of circuit board real estate with precisely centered leads in a microminiature case. These molded packages also provide significant improvements in overall dimensional consistency as well as lead wires precisely spaced to within .010 inches (.25mm). With our new molded packaging design, these capacitors can now be marked using our laser printing technique. The KEMET laser marking system ensures legibility and permanency while offering a complete alphanumeric print format. Laser print meets all requirements of the Resistance to Solvents Test, method 215 of MIL-STD-202. PERFORMANCE CHARACTERISTICS * CAPACITANCE/VOLTAGE RANGE: T370 Series: 0.68-220F, 3-35 Volts. T378 Series: 2.2-220F, 3-35 Volts. * CAPACITANCE TOLERANCE: Available in standard EIA nominal values with 20% tolerance standard, +40% -20%, 10% and 5% are also available. * DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on page 57. See Application Notes Section, page 2 for additional information. * DC LEAKAGE CURRENT: Maximum leakage values at 25 are shown in part number listings, page 57. See Application Notes Section, page 2 for additional information. * RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE; REVERSE VOLTAGE: See Application Notes Section, pages 2 & 3 for description. * IMPEDANCE and ESR: See Application Notes Section, pages 3 & 4 for description. Reference ESR values are listed in table below. age is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size. Thermal capacities for the various case sizes have been determined and are listed in Table below. For additional description see page 4. * ENVIRONMENTAL CONSIDERATIONS: Case Size Watts C D E F .070 .080 .090 .100 Maximum Power Dissipation Capability @ 25C A. Shock Test: MIL-STD-202, Method 213 Condition 1. B. Thermal Shock, MIL-STD-202, Method 107. C. Moisture Resistance: MIL-STD-202, Method 106. D. Solderability: MIL-STD-202, Method 208. For additional Environmental Test Information see pages 6, 7, and 8. * LEAD MATERIAL: Solder coated nickel per MIL-STD1266, type N32. * AC RIPPLE VOLTAGE: Permissible AC ripple voltT370 ESR (OHMS) at 100 kHz @ +25C (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy of these values for any particular T370 Series product.) Cap. F 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 6 Volt 6.0 5.0 3.7 3.0 2.0 1.8 1.6 0.9 10 Volt 6.0 5.0 3.7 2.7 2.1 1.7 1.3 1.0 15 Volt 2.5 2.0 1.6 1.3 1.0 20 Volt 5.5 4.5 3.6 2.9 2.3 1.8 1.4 1.2 25 Volt 6.0 5.0 4.0 3.1 2.5 2.0 1.5 1.2 * LEAD TAPE and REEL: Reeling per specification RS-468. See pages 61 and 62 for additional information. 35 Volt 10.0 8.0 6.0 5.0 4.0 3.0 2.5 2.0 1.6 1.3 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 55 TANTALUM MOLDED / RADIAL - MIL-PRF-49137/6 T370/T378 (CX06) SERIES CAPACITOR OUTLINE DRAWING T370 CASE SIZE T378 T W DIMENSIONS - INCHES (MILLIMETER) H MAX. W MAX. T MAX. *C .225 (5.72) .185 (4.70) .075 (1.91) .150 .010 (3.81 .25) .016 (.41) D .290 (7.37) .220 (5.59) .110 (2.79) .180 .010 (4.57 .25) .016 (.41) H S LEAD SPACING LEAD DIAMETER .001 (.03) E .310 (7.87) .230 (5.84) .130 (3.30) .200 .010 (5.08 .25) .016 (.41) F .475 (12.07) .375 (9.53) .150 (3.81) .300 .010 (7.62 .25) .016 (.41) *C case size T370 style only. 1.375 .125 (34.933.18) S 1.625.125 (41.283.18) CAPACITOR MARKING (-) (+) INDUSTRIAL PRODUCT Leads Lengths Both .350.050 (8.891.27) MILITARY PRODUCT T370 KEMET Trademark Military Part Number Voltage Rating Polarity Indicator (+) KEMET Trademark CX06M226M 0126VDK Polarity Indicator (+) 106M 020K Capacitance Tolerance T378 Lot Code Date Code (Year/Week) Capacitance Value (pf code) ORDERING INFORMATION KEMET PART NUMBER T 37X D 475 M 035 A S* TANTALUM LEAD MATERIAL SERIES T370, T378 S -- Standard (solder-coated nickel) CASE SIZE FAILURE RATE LEVEL A -- Not Applicable VOLTAGE RATING CAPACITANCE IN PICOFARAD CODE First two digits are significant figures. Third figure is the number of zeros following. CAPACITANCE TOLERANCE M -- 20%, K -- 10%, J -- 5% L -- +40%, -20% *Part Number Example: T370D475M035AS (14 digits - no spaces) MIL-PRF-49137/6 PART NUMBER CX06(T378) STYLE CX TYPE D 335 K CAPACITANCE TOLERANCE Fixed, solid tantalum, polar, nonhermetically sealed capacitors. Symbol STYLE K M 06-T378 (radial leads) VOLTAGE 56 06 Capacitance Tolerance Percent 10 20 CAPACITANCE Symbol Rated (85C) Volts, dc Surge (85C) Volts, dc A B C D F H J K M 2 3 4 6 10 15 20 25 35 2.6 4 5 8 13 20 26 32 46 The nominal capacitance value, expressed in picofarads (pF), is identified by a three digit number. The first two digits represent significant figures and the last digit specifies the number of zeros to follow. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com TANTALUM MOLDED / RADIAL - MIL-PRF-49137/6 T370/T378 (CX06) SERIES RATINGS & PART NUMBER REFERENCE CAPACITANCE F CASE SIZE INDUSTRIAL PRODUCT KEMET T370 PART NUMBER MILITARY CX06 PRODUCT PART NUMBER KEMET MILITARY EQUIVALENT PRODUCT T378 PART NUMBER MAX. D.C. LEAKAGE A@25C MAX. DISSIPATION FACTOR % @ 25C 120Hz 3 VOLT RATING AT 85C - 2 VOLT RATING AT 125C 220.0 F T370F227(1)003AS CX06B227(2) T378F227(3)003AS 4 VOLT RATING AT 85C - 2.7 VOLT RATING AT 125C 9.0 15 15.0 47.0 68.0 C D E T370C156(1)004AS CX06C156(2) T378C156(3)004AS T370D476(1)004AS CX06C476(2) T378D476(3)004AS T370E686(1)004AS CX06C686(2) T378E686(3)004AS 6 VOLT RATING AT 85C - 4 VOLT RATING AT 125C 1.0 2.0 3.0 8.0 8.0 8.0 10.0 33.0 47.0 150.0 C D E F T370C106(1)006AS CX06D106(2) T378C106(3)006AS T370D336(1)006AS CX06D336(2) T378D336(3)006AS T370E476(1)006AS CX06D476(2) T378E476(3)006AS T370F157(1)006AS CX06D157(2) T378F157(3)006AS 10 VOLT RATING AT 85C - 7 VOLT RATING AT 125C 1.0 2.0 3.0 9.0 6.0 6.0 6.0 10.0 6.8 22.0 33.0 100.0 C D E F T370C685(1)010AS CX06F685(2) T378C685(3)010AS T370D226(1)010AS CX06F226(2) T378D226(3)010AS T370E336(1)010AS CX06F336(2) T378E336(3)010AS T370F107(1)010AS CX06F107(2) T378F107(3)010AS 15 VOLT RATING AT 85C - 10 VOLT RATING AT 125C 1.0 2.0 3.0 9.0 6.0 6.0 6.0 8.0 15.0 22.0 68.0 D E F T370D156(1)015AS CX06H156(2) T378D156(3)015AS T370E226(1)015AS CX06H226(2) T378E226(3)015AS T370F686(1)015AS CX06H686(2) T378F686(3)015AS 20 VOLT RATING AT 85C - 13 VOLT RATING AT 125C 2.0 3.0 9.0 6.0 6.0 8.0 3.3 4.7 10.0 15.0 47.0 C C D E F T370C335(1)020AS CX06J335(2) T378C335(3)020AS T370C475(1)020AS CX06J475(2) T378C475(3)020AS T370D106(1)020AS CX06J106(2) T378D106(3)020AS T370E156(1)020AS CX06J156(2) T378E156(3)020AS T370F476(1)020AS CX06J476(2) T378F476(3)020AS 25 VOLT RATING AT 85C - 17 VOLT RATING AT 125C 1.0 1.0 2.0 3.0 9.0 6.0 6.0 6.0 6.0 8.0 2.2 6.8 10.0 33.0 C D E F T370C225(1)025AS CX06K225(2) T378C225(3)025AS T370D685(1)025AS CX06K685(2) T378D685(3)025AS T370E106(1)025AS CX06K106(2) T378E106(3)025AS T370F336(1)025AS CX06K336(2) T378F336(3)025AS 35 VOLT RATING AT 85C - 23 VOLT RATING AT 125C 1.0 2.0 3.0 9.0 6.0 6.0 6.0 6.0 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 C C C D D D E F F F T370C684(1)035AS T370C105(1)035AS T370C155(1)035AS T370D225(1)035AS T370D335(1)035AS T370D475(1)035AS T370E685(1)035AS T370F106(1)035AS T370F156(1)035AS T370F226(1)035AS 1.0 1.0 1.0 2.0 2.0 2.0 3.0 9.0 9.0 9.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 CX06M684(2) CX06M105(2) CX06M155(2) CX06M225(2) CX06M335(2) CX06M475(2) CX06M685(2) CX06M106(2) CX06M156(2) CX06M226(2) T378C684(3)035AS T378C105(3)035AS T378C155(3)035AS T378D225(3)035AS T378D335(3)035AS T378D475(3)035AS T378E685(3)035AS T378F106(3)035AS T378F156(3)035AS T378F3226(3)035AS (1) To complete KEMET part number, insert capacitance tolerance symbol as follows: L = +40%, -20%; M = 20%; K = 10%; J = 5%. (2) To complete military part number, insert capacitance tolerance symbol as follows: M = 20%; K = 10%. (3) To complete KEMET part number, insert capacitance tolerance symbol as follows: M = 20%; K = 10%. 57 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com