CE Marked - LVD & EMC
•
Din Rail Mounting
•
Power Factor Corrected Versions
•
Adjustable Outputs
•
Low Noise
•
High Efficiency
•
Parallelable Units
(All specifications are typical at nominal input voltage; full load and 25 °C unless stated otherwise)
Input Voltage • 93-264 V AC - TSL30 & TSL60
93-132 V AC/187-264 auto-ranging TSL120, TSL240 & TSL480
Input Frequency • 47-63 Hz
Inrush Current • See Table
Input Current • See Table
Hold Up Time • Minimum 15 ms at 115 V AC, minimum 25 ms at 230 V AC
Output Voltage • See Table
Output Adjustment • 12 V models: 12-14 V DC, 24 V models: 24-28 V DC & 48 V models: 48-52 V DC
Line Regulation • ±0.2%
Load Regulation • ±0.3% for load variation 10-90%
Ripple & Noise • <50 mV pk-pk 20 MHz bandwidth
Overload Protection • 110%
Overvoltage Protection • 140% of V out typically
Efficiency • 85% minimum
Operating Temperature • -25 °C to 70 °C, derating above 50 °C at 2%/°C
Storage Temperature • -25 °C to 85 °C
Relative Humidity • 95%
Isolation • 3000 V AC - input to output, 1 minute
2000 V AC - input to case, 1 minute
500 V AC - output to case, 1 minute
EMI/RFI • EN55011, EN55022, FCC class B
TSL120, TSL240 & TSL480 (P version) with PFC-EN61000-3-2
Safety Approvals • EN60950, IEC950, cUL/UL 1950, UL508
Immunity • EN61000-4-4 2 kV
MTBF • 200,000 hours
Switching Frequency • 80 kHz typical
Industrial Power Supplies
TSL SERIES 30-480 Watts
Specification
Tel: +44 (0)118 984 5515 Tel: +49 (0)700 9977 1000
UK D
Output Output Output Input Current @ Full Load In-rush Current Max. Model
Power Max. Voltage Nom. Current Max. 115 V AC 230 V AC 115 V AC 230 V AC Number
30 W 12 V DC 2.50 A 0.5 A 0.30 A 17.5 A 35.0 A TSL30-112
24 V DC 1.25 A 0.5 A 0.30 A 17.5 A 35.0 A TSL30-124
60 W 12 V DC 5.00 A 1.1 A 0.65 A 24.0 A 48.0 A TSL60-112
24 V DC 2.50 A 1.1 A 0.65 A 24.0 A 48.0 A TSL60-124
120 W
24 V DC 5.00 A 1.9 A 1.20 A 24.0 A 48.0 A TSL120-124
24 V DC 5.00 A 1.9 A 1.20 A 24.0 A 48.0 A TSL120-124P(1)
48 V DC 2.50 A 1.9 A 1.20 A 24.0 A 48.0 A TSL120-148
48 V DC 2.50 A 1.9 A 1.20 A 24.0 A 48.0 A TSL120-148P(1)
240 W
24 V DC 10.00 A 3.5 A 1.70 A 35.0 A 69.0 A TSL240-124
24 V DC 10.00 A 3.5 A 1.70 A 35.0 A 69.0 A TSL240-124P(1)
48 V DC 5.00 A 3.5 A 1.70 A 35.0 A 69.0 A TSL240-148
48 V DC 5.00 A 3.5 A 1.70 A 35.0 A 69.0 A TSL240-148P(1)
24 V DC 20.00 A 7.2 A 3.50 A 33.0 A 65.0 A TSL480-124
480 W 24 V DC 20.00 A 7.2 A 3.50 A 33.0 A 65.0 A TSL480-124P(1)
48 V DC 10.00 A 7.2 A 3.50 A 33.0 A 65.0 A TSL480-148
48 V DC 10.00 A 7.2 A 3.50 A 33.0 A 65.0 A TSL480-148P(1)
(4)
NOTES:
1. Power Factor Correction (EN61000-3-2) models.
2. Output current characteristic, suitable for battery charging applications.
3. Parallel operation available for 5 units maximum, user selectable by jumper on PCB.
4. Inrush current is the peak current flowing into a power supply at the instant AC power is applied. This peak
(max. 2ms) may be much higher than the steady state input current due to the charging of the input capacitors.
TSL30 MODEL TSL60 MODEL TSL120 MODEL
Output Voltage & Current Ratings
Mechanical Details
DIN-Rail Power Industrial Power Supplies 30-480 Watts TSL Series www.xpplc.com
TSL240 MODEL TSL480
MODEL
Tel: +33 (0)820 801 401 Tel: +41 (0)56 483 34 00
FCH Rev 1.0
