TPS3800-xx TPS3801-xx TPS3802-xx www.ti.com SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 ULTRA-SMALL SUPPLY VOLTAGE SUPERVISORS Check for Samples: TPS3800-xx, TPS3801-xx, TPS3802-xx FEATURES 1 * * * 2 * * * Small, 5-Pin SC-70 (SOT-323) Package Supply Current of 9 mA Power-On Reset Generator With Fixed Delay Time - TPS3800 = 100 ms - TPS3801 = 200 ms - TPS3802 = 400 ms Precision Supply Voltage Monitor 1.8 V, 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V, and Adjustable Manual Reset Input (Except TPS3801-01) Temperature Range: -40C to +85C APPLICATIONS * * * * * * * * Applications Using DSPs, Microcontrollers, or Microprocessors Wireless Communication Systems Portable/Battery-Powered Equipment Programmable Controls Intelligent Instruments Industrial Equipment Notebook/Desktop Computers Automotive Systems DESCRIPTION The TPS380x family of supervisory circuits monitor supply voltages to provide circuit initialization and timing supervision, primarily for DSPs and other processor-based systems. These devices assert a push-pull RESET signal when the SENSE (adjustable version) or VDD (fixed version) drops below a preset threshold. The RESET output remains asserted for the factory programmed delay time after the SENSE or VDD return above its threshold. The TPS380x devices, except the TPS3801-01, incorporate a manual reset input (MR). A low level at MR causes RESET to become active. The TPS380x uses a precision reference to achieve an overall threshold accuracy of 2%--2.5%. These devices are available in a 5-pin SC-70 package, which is only about half the size of a 5-pin SOT-23 package. The TPS380x devices are fully specified over a temperature range of -40C to +85C. TPS380x . . . DCK PACKAGE (TOP VIEW) GND 1 5 MR VDD = 1.8 V 100 nF GND 2 RESET 3 TMS320VC5420 VDD 4 VDD TPS3801E18 MR TPS3801-01 . . . DCK PACKAGE (TOP VIEW) GND 1 GND 2 RESET 3 5 SENSE 4 VDD CoreVDD RESET RESET GND GND 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1999-2010, Texas Instruments Incorporated TPS3800-xx TPS3801-xx TPS3802-xx SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. AVAILABLE OPTIONS (1) TA -40C to 85C (1) DEVICE NAME THRESHOLD VOLTAGE TYP DELAY TIME TPS3801-01DCK Adjustable (Vref = 1.14 V) 200 ms MARKING ARF TPS3801E18DCK 1.71 V 200 ms ARE TPS3801J25DCK 2.25 V 200 ms NJA TPS3800G27DCK 2.5 V 95 ms ARI TPS3801L30DCK 2.64 V 200 ms NPA TPS3801K33DCK 2.93 V 200 ms NWA TPS3802L30DCK 2.64 V 380 ms ASA TPS3802K33DCK 2.93 V 380 ms ARK TPS3801T50DCK 4.00 V 25 ms AVI TPS3801I50DCK 4.55 V 200 ms NSA For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or refer to our web site at www.ti.com. ABSOLUTE MAXIMUM RATINGS (1) (2) Over operating free-air temperature range (unless otherwise noted). UNIT Supply voltage, VDD 7V SENSE -0.3 V to 5 V All other pins -0.3 V to 7 V MR -0.3 V to VDD + 0.3 V RESET -0.3 V to VDD + 0.3 V Maximum low-output current, IOL 5 mA Maximum high-output current, IOH -5 mA Input-clamp current, IIK (VI < 0 or VI > VDD) 20 mA Output-clamp current, IOK (VO < 0 or VO > VDD) Operating junction temperature range, TJ 20 mA (3) -40C to +85C Storage temperature range, Tstg (1) (2) (3) -65C to +150C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values are with respect to GND. For reliable operation, the device should not be operated at 7 V for more than t = 1000h continuously. Due to the low dissipation power of this device, it is assumed that TJ = TA. RECOMMENDED OPERATING CONDITIONS Supply voltage, VDD MIN MAX TPS3801J25, TPS3801L30, TPS3801K33, TPS3801I50, TPS3801T50 2 6 All other devices 1.6 4 UNIT V SENSE 0 See (1) V Input voltage, VI 0 VDD +0.3 V 0.7 x VDD VDD +0.3 V High-level input voltage, VIH Low-level input voltage, VIL 0.3 x VDD Input transition rise and fall rate at MR, t/V VPull-up Pull-up resistor value, RESET 2 -40 V ns/V 50A Operating free-air temperature range, TA (1) 100 +85 C Maximum = VDD + 0.3 or 4.5 V, whichever is greater. Submit Documentation Feedback Copyright (c) 1999-2010, Texas Instruments Incorporated Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx TPS3800-xx TPS3801-xx TPS3802-xx www.ti.com SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 ELECTRICAL CHARACTERISTICS Over -40C to +85C free-air temperature range (unless otherwise noted). PARAMETER TEST CONDITIONS TPS3800-xx, TPS3801-xx, TPS3802-xx MIN VOH High-level output voltage (RESET) VDD = 1.6 V to 6 V IOH = -500 mA VDD -0.2 VDD = 3.3 V IOH = -2 mA VDD -0.4 VDD = 6 V IOH = -4 mA VOL Low-level output voltage (RESET) VIT- Vhys Negative-going input threshold voltage (3) Threshold hysteresis V 0.2 VDD = 3.3 V, IOL = 2 mA 0.4 (1) VDD 1.1 V, IOL = 50 mA 0.2 1.117 1.14 1.163 TPS380xE18 1.67 1.71 1.75 TPS380xJ25 2.2 2.25 2.3 2.45 2.5 2.55 2.58 2.64 2.7 TPS380xK33 2.87 2.93 2.99 TPS380xI50 4.45 4.55 4.65 TPS380xT50 3.92 4 4.08 TPS380xL30 TA = -40C to 85C TPS380x-01 15 TPS380xx18 25 TPS380xx25 30 TPS380xx27 35 TPS380xx30 35 TPS380xx33 40 High-level input current (MR) MR = 0.7xVDD, VDD = 6 V IIL Low-level input current (MR) MR = 0 V, VDD = 6 V II Input current (SENSE) Supply current TPS3801E18, TPS3800G27, TPS3802K33, TPS3802L30 Ci (1) (2) (3) Input capacitance V mV -40 -60 -100 -130 -200 -340 -25 TPS3801-01 V 60 IIH TPS3801J25, TPS3801L30, TPS3801K33, TPS3801I50, TPS3801T50 V 0.4 TPS380x-01 TPS380xG27 UNIT VDD -0.4 TPS380xx50 IDD MAX VDD = 1.6 V to 6 V, IOL = 500 mA VDD = 6 V, IOL = 4 mA Power-up reset voltage (2) (1) TYP mA 25 VDD = 2 V, MR and output unconnected 9 12 VDD = 6 V, MR and output unconnected 20 25 VDD = 1.6 V, SENSE = 0 V to VDD, output unconnected 7 10 VDD = 4 V, SENSE = 0 V to VDD, output unconnected 9 12 VDD = 1.6 V, MR and output unconnected 8 11 13 18 nA mA VDD = 4 V, MR and output unconnected VI = 0 V to VDD 5 pF Only valid for the TPS3801J25, TPS3801L30, TPS3801K33, TPS3801I50, and TPS3801T50. The lowest supply voltage at which RESET becomes active. tr, VDD 15 ms/V. To ensure the best stability of the threshold voltage, a bypass capacitor (0.1-mF ceramic) should be placed near the supply terminals. Copyright (c) 1999-2010, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx 3 TPS3800-xx TPS3801-xx TPS3802-xx SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 www.ti.com TIMING REQUIREMENTS at RL = 1 M, CL = 50 pF, TA = +25C PARAMETER TEST CONDITIONS at SENSE tw Pulse width MIN TYP VDD = 1.6 V, VIH = 1.1 x VIT-, VIL = 0.9 x VIT- 1 at VDD VDD = VIT- + 0.2 V, VDD = VIT- -0.2 V 3 at MR VDD VIT- + 0.2 V, VIL = 0.3 x VDD, VIH = 0.7 x VDD MAX UNIT ms 100 ns SWITCHING CHARACTERISTICS at RL = 1 M, CL = 50 pF, TA = +25C PARAMETER TEST CONDITIONS MIN TPS3801T50 td VDD VIT- + 0.2 V, MR 0.7 x VDD See timing diagram TPS3800 RESET recovery delay time TPS3801 TPS3802 MR to RESET delay tPHL Propagation (delay) time, high-to-low-level output TYP 15 VDD to RESET delay SENSE to RESET MAX 25 35 60 95 140 120 200 280 240 380 560 VDD VIT- + 0.2 V, VIL = 0.3 x VDD, VIH = 0.7 x VDD VIL = VIT- - 0.2 V, VIH = VIT- + 0.2 V UNIT ms 15 ns 1 ms TIMING DIAGRAM VDD V(NOM) VIT 1.1 V t MR 1 II II II II II II II II II II II II 0 RESET 1 0 td td t t td Undefined Behavior of RESET Output For VDD < 1.1 V NOTE: RESET should not be forced high during the power-up sequence (until VDD > 1.1 V). 4 Submit Documentation Feedback Copyright (c) 1999-2010, Texas Instruments Incorporated Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx TPS3800-xx TPS3801-xx TPS3802-xx www.ti.com SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 FUNCTIONAL BLOCK DIAGRAMS FUNCTION/TRUTH TABLE, TPS380x RESET VDD>VIT MR L 0 L L 1 L H 0 L H 1 H TPS380x VDD MR Reset Logic + Timer 30 k R1 _ VDD RESET + R2 GND Oscillator Reference Voltage of 1.14 V Figure 1. TPS3801-01 VDD Device Supply Voltage VDD Reset Logic + Timer _ SENSE RESET + Oscillator Reference Voltage of 1.14 V Figure 2. Copyright (c) 1999-2010, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx 5 TPS3800-xx TPS3801-xx TPS3802-xx SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 www.ti.com TYPICAL CHARACTERISTICS spacer LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT SUPPLY CURRENT vs SUPPLY VOLTAGE 50 2.75 VDD = 2.5 V MR = OPEN MR = OPEN TA = 25C 40 2.25 30 2.00 TA = 25C 1.75 1.50 TA = 85C 1.25 TA = 0C 1.00 0.75 TA = -40C 0.50 I DD - Supply Current - A VOL - Low-Level Output Voltage - V 2.50 20 10 TPS3801J25 0 -10 -20 -30 -40 0.25 0.00 0.0 -50 2.5 5.0 7.5 10.0 -2 12.5 0 Figure 4. HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 6 3.00 VDD = 6.0 V MR = OPEN 5.5 5.0 4.5 TA = -40C 4.0 3.5 TA = 0C 3.0 2.5 TA = 85C 2.0 1.5 1.0 VDD = 2.5 V MR = OPEN 2.75 TA = 25C VOH - High-Level Output Voltage - V 6.0 VOH - High-Level Output Voltage - V 4 Figure 3. 6.5 2.50 2.25 2.00 TA = -40C 1.75 1.50 TA = 0C 1.25 1.00 TA = 85C 0.75 0.50 TA = 25C 0.25 0.5 0.00 0.0 0 -10 -20 -30 -40 IOH - High-Level Output Current - mA -50 0 -2 Submit Documentation Feedback -4 -6 -8 -10 IOH - High-Level Output Current - mA Figure 5. 6 2 VDD - Supply Voltage - V IOL - Low-Level Output Current - mA Figure 6. Copyright (c) 1999-2010, Texas Instruments Incorporated Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx TPS3800-xx TPS3801-xx TPS3802-xx www.ti.com SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 TYPICAL CHARACTERISTICS (continued) spacer INPUT CURRENT vs INPUT VOLTAGE AT MR spacer MINIMUM PULSE DURATION AT VDD vs VDD THRESHOLD OVERDRIVE VOLTAGE 3.5 100 VDD = 6 V TA = 25C tw - Minimum Pulse Duration at VDD - s I - Input Current - A I 0 MR = OPEN -100 -200 -300 -400 -500 -2 3 2.5 2 1.5 1 0.5 0 0 2 4 0 6 0.4 0.6 0.8 Figure 7. Figure 8. NORMALIZED INPUT THRESHOLD VOLTAGE vs FREE-AIR TEMPERATURE AT VDD NORMALIZED INPUT THRESHOLD VOLTAGE vs FREE-AIR TEMPERATURE AT VDD MR = OPEN 1.000 0.999 0.998 0.997 TPS3801S25 TPS3801L30 TPS3801K33 TPS3801I50 TPS3801T50 0.996 0.995 -40 1 1.006 1.001 VIT - Normalized Input Threshold Voltage - V VIT (TA)/ VIT (25 C ) VI - Input Voltage at MR - V Normalized Input Threshold Voltage 0.2 VDD Threshold Overdrive Voltage - V 1.002 1 0.998 0.996 0.994 0.992 0.990 0.988 -40 -20 0 20 40 60 TA - Free-Air Temperature at VDD - C 85 TPS3801-01 TPS3801E18 TPS3800 TPS3802 1.004 -20 0 Figure 9. Copyright (c) 1999-2010, Texas Instruments Incorporated 20 40 60 80 TA - Free-Air Temperature at VDD - C Figure 10. Submit Documentation Feedback Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx 7 TPS3800-xx TPS3801-xx TPS3802-xx SLVS219E - AUGUST 1999 - REVISED OCTOBER 2010 www.ti.com Changes from Revision D (December 2006) to Revision E * 8 Page Added Pull-up resistor value, RESET to the Recommended Operating Conditions Table .................................................. 2 Submit Documentation Feedback Copyright (c) 1999-2010, Texas Instruments Incorporated Product Folder Link(s): TPS3800-xx TPS3801-xx TPS3802-xx PACKAGE OPTION ADDENDUM www.ti.com 28-Oct-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3800G27DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3800G27DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801-01DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801-01DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801E18DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801E18DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801I50DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801I50DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801J25DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801J25DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801K33DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801K33DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801L30DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801L30DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801T50DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801T50DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3801T50DCKT OBSOLETE SC70 DCK 5 TBD Addendum-Page 1 Call TI Call TI Samples Not Available PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 28-Oct-2010 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) TPS3802K33DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3802K33DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3802L30DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TPS3802L30DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 12-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TPS3800G27DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 TPS3800G27DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801-01DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801E18DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801E18DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 TPS3801I50DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801J25DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801K33DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 TPS3801K33DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801L30DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3801T50DCKR SC70 DCK 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 TPS3801T50DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3802K33DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TPS3802L30DCKR SC70 DCK 5 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 12-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS3800G27DCKR SC70 DCK 5 3000 180.0 180.0 18.0 TPS3800G27DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801-01DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801E18DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801E18DCKR SC70 DCK 5 3000 180.0 180.0 18.0 TPS3801I50DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801J25DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801K33DCKR SC70 DCK 5 3000 180.0 180.0 18.0 TPS3801K33DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801L30DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3801T50DCKR SC70 DCK 5 3000 180.0 180.0 18.0 TPS3801T50DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3802K33DCKR SC70 DCK 5 3000 202.0 201.0 28.0 TPS3802L30DCKR SC70 DCK 5 3000 202.0 201.0 28.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated