Revised February 2000 DM74ALS1004 Hex Inverting Driver General Description Features These devices contain six independent drivers, each of which performs the logic inverter/complement function. Switching specifications at 50 pF Switching specifications guaranteed over full temperature and VCC range Advanced oxide-isolated, ion-implanted Schottky TTL process Functionally and pin for pin compatible with Schottky and low power Schottky TTL counterpart Improved AC performance over Schottky and low power Schottky counterparts Ordering Code: Order Number Package Number DM74ALS1004M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Description DM74ALS1004N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Connection Diagram Function Table Y=A Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level (c) 2000 Fairchild Semiconductor Corporation DS006252 www.fairchildsemi.com DM74ALS1004 Hex Inverting Driver September 1986 DM74ALS1004 Absolute Maximum Ratings(Note 1) Supply Voltage 7V Input Voltage 7V 0C to +70C Operating Free Air Temperature Range Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. -65C to +150C Storage Temperature Range Typical JA N Package 76.0C/W M Package 106.5C/W Recommended Operating Conditions Symbol Parameter Min Nom Max Units 4.5 5 5.5 V LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current -15 mA IOL LOW Level Output Current 24 mA TA Free Air Operating Temperature 70 C VCC Supply Voltage VIH HIGH Level Input Voltage VIL 2 V 0 Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25C. Symbol Parameter Conditions Min VIK Input Clamp Voltage VCC = 4.5V, II = -18 mA VOH HIGH Level IOH = -0.4 mA, VCC = 4.5V to 5.5V Output Voltage IOH = Max, VCC = 4.5V Input Current at Maximum Input Voltage V 2 Output Voltage II Units -1.5 V 2.4 VCC = 4.5V LOW Level Max VCC - 2 IOH = -3 mA, VCC = 4.5V VOL Typ IOL = 12 mA 0.25 0.4 V IOL = 24 mA 0.35 0.5 V 0.1 mA VCC = 5.5V, VIH = 7V IIH HIGH Level Input Current VCC = 5.5V, VIH = 2.7V 20 A IIL LOW Level Input Current VCC = 5.5V, VIL = 0.4V -0.1 mA IO Output Drive Current VCC = 5.5V, VO = 2.25V -112 mA ICC Supply Current VCC = 5.5V -30 Outputs HIGH 0.84 3 mA Outputs LOW 7 12 mA Min Max Units 1 7 ns 1 6 ns Switching Characteristics over recommended operating free air temperature range Symbol tPLH tPHL Parameter Conditions Propagation Delay Time VCC = 4.5V to 5.5V LOW-to-HIGH Level Output RL = 500, Propagation Delay Time CL = 50 pF HIGH-to-LOW Level Output www.fairchildsemi.com 2 DM74ALS1004 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com DM74ALS1004 Hex Inverting Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 4