CD42__90 CD47__90 TM POW-R-BLOK Dual SCR/Diode Isolated Module 90 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A C F G H 7 6 3 2 "T" K 1 4 5 B J "U" THREAD "S" FASTON TAB L R D M P N 4 5 1 CD42 2 ~ 3 - + CD47 1 7 CD42__90, CD47__90 Dual SCR/Diode Isolated TM POW-R-BLOK Module 90 Amperes / Up to 1600 Volts 6 2 ~ Q 3 - + Features: Features: TElectrically Isolated Heatsinking TDBC Alumina (Al2O3) Insulator T Glass Passivated Chips T DBC Alumina (Al2O3) Baseplate T Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240) CONNECTION DIAGRAM Benefits: CD42, CD47 Outline Dimensions Millimeters Ordering Information: Select the complete eight digit module part number from the table below. Example: CD421690 is a 1600Volt, 90 Ampere Dual SCR/Diode Isolated TM POW-R-BLOK Module Dimension Inches A 3.62 92 B 0.81 20.5 C 3.15 80 D 1.18 30 F 0.59 15 G 0.79 20 H 0.79 20 J 0.16 4 K 0.23 5.8 CD42 CD47 L 0.61 15.5 M 1.14 29 N 0.24 6.1 P 0.94 24 Q 1.18 30 R 0.71 18 S 0.11 x .03 2.8 x 0.8 T 0.25 6.3 U M5 M5 Type Voltage Volts (x100) Current Amperes (x 1) 08 12 16 90 TNo Additional Insulation Components Required TEasy Installation TNo Clamping Components Required T Reduce Engineering Time Applications: TBridge Circuits TAC & DC Motor Drives TBattery Supplies TPower Supplies TLarge IGBT Circuit Front Ends TLighting Control THeat & Temperature Control TWelders Note: Dimensions are for reference only Revision Date: 11/1/2001 http://store.iiic.cc/ CD42__90 CD47__90 Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 TM POW-R-BLOK Dual SCR/Diode Isolated Module 90 Amperes / Up to 1600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180 Conduction, TC=87C IT(RMS) 140 180 Conduction, TC=87C (AC Switch) IT(RMS) 200 A 180 Conduction, TC=87C IT(AV) 90 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 1570 A 60 Hz, No VRRM reapplied, Tj=125C ITSM 1870 A 60 Hz, No VRRM reapplied, Tj=25C ITSM 2100 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 1500 A 50 Hz, No VRRM reapplied, Tj=125C ITSM 1785 A 50 Hz, No VRRM reapplied, Tj=25C ITSM 2000 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 1210 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 1155 A 60 Hz, 100% VRRM reapplied, Tj=125C 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 960 A ITSM 940 2 A 2 8.3 ms, 100% VRRM reapplied, Tj=125C It 10,270 A sec 8.3 ms, No VRRM reapplied, Tj=125C It 2 14,520 A sec 8.3 ms, No VRRM reapplied, Tj=25C It 2 18,300 A sec 10 ms, 100% VRRM reapplied, Tj=125C It 2 11,250 A sec 10 ms, No VRRM reapplied, Tj=125C It 2 15,910 A sec It 2 20,000 A sec Tj=25C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5s, tp > 6s di/dt 150 A/s Peak Gate Power Dissipation Tp < 5 ms, Tj = 125C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125C PG(AV) 3 W Peak Forward Gate Current Tp < 5 ms, Tj = 125C IGFM 3 A Tp < 5 ms, Tj = 125C VGRM 10 V Operating Temperature TJ -40 to +125 C Storage Temperature Tstg -40 to +125 C 25 3 44 5 83 in.-Lb. Nm in.-Lb. Nm g 3 oz. 2500 3500 V V 10 ms, No VRRM reapplied, Tj=25C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Peak Reverse Gate Voltage Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together 50 - 60 Hz, 1 minute 50 - 60 Hz, 1 second Vrms Vrms 2 2 2 2 2 Revision Date: 11/1/2001 http://store.iiic.cc/ CD42__90 CD47__90 TM POW-R-BLOK Dual SCR/Diode Isolated Module 90 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Symbol Test Conditions Min. IDRM Up to 1600V, TJ=125C Max. Units 15 mA IRRM Up to 1600V, TJ=125C 15 mA V TM / VFM ITM / IFM =300A 1.58 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 0.80 2.40 V m Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125C, I = IT(AV) to ITSM 0.85 2.25 V m Peak On-State Voltage VTM Coefficients, Full Range TJ = 125C, I = 15% x IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt A= B= C= D= 0.7160 2.17E-02 2.20E-03 1.58E-03 dV/dt Linear to 2/3 VDRM Tj=125C, Gate Open Circuit 500 Turn-Off Time (Typical) t off 40 - 100 Gate Trigger Current IGT TJ = 25C, IT = 2A Vr = 50V, -dI/dt=10 A/s Re-Applied dV/dt = 200 V/s, Linear to 900 V Tj= -40C, VD=6V, Resistive Load Tj= 25C, VD=6V, Resistive Load Tj=125C, VD=6V, Resistive Load Gate Trigger Voltage VGT Non-Triggering Gate Voltage VGDM Non-Triggering Gate Current V/s (Typical) s 270 mA 150 mA 80 mA Tj= -40C, VD=6V, Resistive Load Tj= 25C, VD=6V, Resistive Load Tj=125C, VD=6V, Resistive Load 4.0 Volts 2.5 Volts 1.7 Volts Tj=125C, VD=VDRM 0.25 Volts IGDM Tj=125C, VD=VDRM 6 mA Holding Current IH VD=6V, Resistive Load, Gate Open 200 mA Latching Current IL VD=6V, Resistive Load 400 mA Thermal Characteristics Characteristics Symbol Max. Units 0.135 0.270 C/W C/W Thermal Resistance, Junction to Case DC Operation RJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZJ-C ZJ-C= K1 (1-exp(-t/1)) K1 = 6.48 E-3 1 = 5.80 E-4 + K2 (1-exp(-t/2)) K2 = 6.02 E-2 2 = 1.70 E-2 + K3 (1-exp(-t/3)) K3 = 1.64 E-1 3 = 9.54 E-2 + K4 (1-exp(-t/4)) Per Module K4 = 3.94 E-2 4 = 3.53 E-1 0.1 C/W Thermal Resistance, Case to Sink Lubricated RC-S Revision Date: 11/1/2001 http://store.iiic.cc/ CD42__90 CD47__90 TM POW-R-BLOK Dual SCR/Diode Isolated Module 90 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 C ) (Junction to Case) 0.30 4 Thermal Impedance - Rjc - C/W 0.25 3 2.5 2 1.5 1 0.20 0.15 0.10 0.05 0.5 0 10 100 0.00 1000 0.001 0.01 0.1 Instantaneous On-State Current - Itm / Ifm - Amperes 10 100 Maximum Allowable Case Temperature (Sinusoidal Waveform) (Sinusoidal Waveform) 140 125 130 180 120 120 120 110 Max. Case Temperature - Tcase -C Max. Power Dissipation Per Junction - Watts 1 Time - t - Seconds Maximum On-State Power Dissipation 90 100 60 90 30 80 15 70 60 50 40 30 180 0 360 CONDUCTION ANGLE 20 115 180 0 110 360 CONDUCTION ANGLE 105 100 15 95 30 60 90 90 10 120 180 85 0 0 10 20 30 40 50 60 70 80 90 0 100 10 20 30 Average On-State Current - It/If(av) - Amperes 50 60 70 80 90 100 Maximum Allowable Case Temperature (Rectangular Waveform) 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 40 Average On-State Current - It/If(av) - Amperes Maximum On-State Power Dissipation (Rectangular Waveform) 125 270 180 120 90 60 30 0 180 120 360 Max. Case Temperature - Tcase -C Max. Power Dissipation Per Junction - Watts On-State Voltage - Vtm / Vfm - Volts 3.5 360 CONDUCTION ANGLE 115 180 0 110 360 CONDUCTION ANGLE 105 100 95 30 90 60 85 90 120 180 80 270 360 75 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Average On-State Current - It/If(av) - Amperes 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Average On-State Current - It/If(av) - Amperes Revision Date: 11/1/2001 http://store.iiic.cc/