Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
AMP NETCONNECT
Cable Management
•Cable management accessories
for EIA standard 19-inch
equipment racks
•Suitable for high-performance
twisted pair and optical fiber
distribution cables and patch cords
•Horizontal and vertical finger duct
panels available in single- and
double-sided versions
•D-ring style panels and
vertical managers
•“Towel bar” cable support bars
•Racks and shelves manufactured
from durable heavy gauge steel
for strength and reliability
•Durable, attractive powder coat
finish eliminates edge burrs for
enhanced appearance and safety
•Racks have front and rear threaded
mounting holes
One of the major challenges facing cabling
installers and maintenance personnel is organizing
distribution cables and patch cords in the
telecommunications room. AMP NETCONNECT
cable management products will help ensure that
your racks are well organized and maintained from
the day they’re installed through the last move,
add or change.
1308359-Rev.1-15M-M/LHC-HA-2/01 Printed in USA
In the U.S. 1-800-553-0938
Canada 905-475-6222
Mexico 525-729-0400
South and Central Americas 54-11-4733-2200
www.ampnetconnect.com
e-mail: networking.help@tycoelectronics.com
©Copyright 2001 Tyco Electronics Corporation. All rights reserved.
AMP, AMP NETCONNECT, AMP-TY, NETCONNECT and Tyco are trademarks.
Velcro is a trademark of Velcro Industries B.V.
Velcro®Cable Ties
Description Part Number
1" x 8" (pkg of 10) 1375253-X
1" x 12" (pkg of 10) 1375254-X
5/8" x 5 yards 1375255-X
1" x 12" Flame Retardant* 1375256-2
X denotes color: -2 = Black, -3 = White, -4 = Gray, -5 = Orange,
-6 = Blue, -7 = Red, -8 = Yellow, -9 = Green, 1- -0 = Violet
*Complies with NEC 300-22(c) and (d) for use in environmental air
handling spaces.
AMP-TY Nylon Cable Ties
Dimensions Color Minimum Tensile Maximum Bundle Package Part
Length Width Thickness Strength Diameter Quantity Number
Natural 1000 2-604771-9
4" .096" .037" Black 18 lbs .75 1000 2-604771-0
103.0 2.44 .94 Natural 80.1 N 19.1 100 1-604771-9
Black 100 1-604771-0
Natural 1000 2-603227-9
6" .140" .045" Black 30 lbs 1000 2-603227-0
155.0 3.56 1.14 Natural 133.5 N 100 1-603227-9
Black 100 1-603227-0
Natural 1000 2-604772-9
8" .184" .047" Black 50 lbs 1.75 1000 2-604772-0
204.0 4.67 1.19 Natural 222.5 N 44.45 100 1-604772-9
Black 100 1-604772-0
Natural 1000 2-604751-9
12" .183" .051" Black 50 lbs 3.0 1000 2-604751-9
300.0 4.65 1.30 Natural 222.5 N 76.2 100 1-604751-9
Black 100 1-604751-0
Note: Italics denotes millimeter dimension.
Rack Alignment Kit
•Used to align two racks mounted side-by-side
•Provides continuity from rack to rack
•Includes ground bar, splice bar and mounting hardware
AMP NETCONNECT Cable ManagementAMP NETCONNECT Cable Management
Description Part Number
Grounding Bar Kit 1435058-1
Description Part Number
Rack Alignment Kit 1435059-1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Grounding Bar Kit
Note: Grounding requirements may vary. Always consult local
regulations to assure compliance.
AP10 39669 Cable Manage.DS-6 2/21/01 3:19 PM Page 1
AMP NETCONNECT Cable Management
19-Inch Racks and Accessories
Description Part Number
72-Inch Rack 1435045-1
84-Inch Rack 1435046-1
Shelves
Description Part Number
1U Stationary Shelf, Black 1435047-1
2U Stationary Shelf, Black 1435048-1
2U Stationary Shelf, Ventilated, Black 1435049-1
1U Pullout Shelf, Black 1435053-1
1U Pullout Shelf, Ventilated, Black 1435054-1
•Heavy-duty steel construction
•Easy assembly
•Durable powder coat finish
•Standard mounting hole pattern
•Fasteners included (12-24 screws)
•Mounting holes threaded front and rear
•Mount in standard 19-inch equipment racks
•Heavy-duty steel construction
•Durable powder coat finish
•Fastening hardware included
•Optional ventilation for improved air flow
AMP NETCONNECT Cable Management
Description Part Number
1U (1.75") Management Panel 558329-1
Cable Management Panels
Vertical Finger Duct Panels
Horizontal Finger Duct Panels
Panel Height Front (H x D) Rear (H x D) Part Number
1.75" 1.5" x 2" 1" x 4" 1375160-1
1.75" 1.5" x 3" 1" x 4" 1375159-1
3.5" 3" x 3" 2" x 4" 1375158-1
Double-Sided Panels
Panel Height Front (H x D) Part Number
1.75" 1.5" x 2" 1375161-1
1.75" 1.5" x 3" 1375162-1
3.5" 3" x 3" 1375163-1
Single-Sided Panels
Side Mount
Panel Height Front (W x D) Rear (W x D) Part Number
35" 4" x 5" 4" x 5" 1375164-1
78" 4" x 5" 4" x 5" 1375257-1
Center Mount (mounting flanges on both sides to straddle
two racks)
Panel Height Front (W x D) Rear (W x D) Part Number
35" 4" x 5" 4" x 5" 1375166-1
78" 4" x 5" 4" x 5" 1375259-1
Double-Sided Panels
Side Mount
Panel Height Front (W x D) Part Number
35" 4" x 5" 1375165-1
78" 4" x 5" 1375258-1
Center Mount (mounting flanges on both sides to straddle
two racks)
Panel Height Front (W x D) Part Number
35" 4" x 5" 1375167-1
78" 4" x 5" 1375260-1
Single-Sided Panels
Description Part Number
2U (3.5") Management Panel 558331-1
Description Part Number
Single Vertical Management Ring 558334-1
Double Vertical Management Ring 406498-1
Cable Management Rings
Cable Support Bars
Description Part Number
Mounts to back of rack, 5" deep 557548-1
Mounts to back of rack, 2" deep 406042-1
Mounts to rear of cable management panels, 558301-1
part numbers 558329-1 and 558331-1
Mounts to rear of 110Connect patch panels 569590-1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
AP10 39669 Cable Manage.DS-6 2/21/01 3:19 PM Page 4
AMP NETCONNECT Cable Management
19-Inch Racks and Accessories
Description Part Number
72-Inch Rack 1435045-1
84-Inch Rack 1435046-1
Shelves
Description Part Number
1U Stationary Shelf, Black 1435047-1
2U Stationary Shelf, Black 1435048-1
2U Stationary Shelf, Ventilated, Black 1435049-1
1U Pullout Shelf, Black 1435053-1
1U Pullout Shelf, Ventilated, Black 1435054-1
•Heavy-duty steel construction
•Easy assembly
•Durable powder coat finish
•Standard mounting hole pattern
•Fasteners included (12-24 screws)
•Mounting holes threaded front and rear
•Mount in standard 19-inch equipment racks
•Heavy-duty steel construction
•Durable powder coat finish
•Fastening hardware included
•Optional ventilation for improved air flow
AMP NETCONNECT Cable Management
Description Part Number
1U (1.75") Management Panel 558329-1
Cable Management Panels
Vertical Finger Duct Panels
Horizontal Finger Duct Panels
Panel Height Front (H x D) Rear (H x D) Part Number
1.75" 1.5" x 2" 1" x 4" 1375160-1
1.75" 1.5" x 3" 1" x 4" 1375159-1
3.5" 3" x 3" 2" x 4" 1375158-1
Double-Sided Panels
Panel Height Front (H x D) Part Number
1.75" 1.5" x 2" 1375161-1
1.75" 1.5" x 3" 1375162-1
3.5" 3" x 3" 1375163-1
Single-Sided Panels
Side Mount
Panel Height Front (W x D) Rear (W x D) Part Number
35" 4" x 5" 4" x 5" 1375164-1
78" 4" x 5" 4" x 5" 1375257-1
Center Mount (mounting flanges on both sides to straddle
two racks)
Panel Height Front (W x D) Rear (W x D) Part Number
35" 4" x 5" 4" x 5" 1375166-1
78" 4" x 5" 4" x 5" 1375259-1
Double-Sided Panels
Side Mount
Panel Height Front (W x D) Part Number
35" 4" x 5" 1375165-1
78" 4" x 5" 1375258-1
Center Mount (mounting flanges on both sides to straddle
two racks)
Panel Height Front (W x D) Part Number
35" 4" x 5" 1375167-1
78" 4" x 5" 1375260-1
Single-Sided Panels
Description Part Number
2U (3.5") Management Panel 558331-1
Description Part Number
Single Vertical Management Ring 558334-1
Double Vertical Management Ring 406498-1
Cable Management Rings
Cable Support Bars
Description Part Number
Mounts to back of rack, 5" deep 557548-1
Mounts to back of rack, 2" deep 406042-1
Mounts to rear of cable management panels, 558301-1
part numbers 558329-1 and 558331-1
Mounts to rear of 110Connect patch panels 569590-1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
AP10 39669 Cable Manage.DS-6 2/21/01 3:19 PM Page 4
AMP NETCONNECT Cable Management
19-Inch Racks and Accessories
Description Part Number
72-Inch Rack 1435045-1
84-Inch Rack 1435046-1
Shelves
Description Part Number
1U Stationary Shelf, Black 1435047-1
2U Stationary Shelf, Black 1435048-1
2U Stationary Shelf, Ventilated, Black 1435049-1
1U Pullout Shelf, Black 1435053-1
1U Pullout Shelf, Ventilated, Black 1435054-1
•Heavy-duty steel construction
•Easy assembly
•Durable powder coat finish
•Standard mounting hole pattern
•Fasteners included (12-24 screws)
•Mounting holes threaded front and rear
•Mount in standard 19-inch equipment racks
•Heavy-duty steel construction
•Durable powder coat finish
•Fastening hardware included
•Optional ventilation for improved air flow
AMP NETCONNECT Cable Management
Description Part Number
1U (1.75") Management Panel 558329-1
Cable Management Panels
Vertical Finger Duct Panels
Horizontal Finger Duct Panels
Panel Height Front (H x D) Rear (H x D) Part Number
1.75" 1.5" x 2" 1" x 4" 1375160-1
1.75" 1.5" x 3" 1" x 4" 1375159-1
3.5" 3" x 3" 2" x 4" 1375158-1
Double-Sided Panels
Panel Height Front (H x D) Part Number
1.75" 1.5" x 2" 1375161-1
1.75" 1.5" x 3" 1375162-1
3.5" 3" x 3" 1375163-1
Single-Sided Panels
Side Mount
Panel Height Front (W x D) Rear (W x D) Part Number
35" 4" x 5" 4" x 5" 1375164-1
78" 4" x 5" 4" x 5" 1375257-1
Center Mount (mounting flanges on both sides to straddle
two racks)
Panel Height Front (W x D) Rear (W x D) Part Number
35" 4" x 5" 4" x 5" 1375166-1
78" 4" x 5" 4" x 5" 1375259-1
Double-Sided Panels
Side Mount
Panel Height Front (W x D) Part Number
35" 4" x 5" 1375165-1
78" 4" x 5" 1375258-1
Center Mount (mounting flanges on both sides to straddle
two racks)
Panel Height Front (W x D) Part Number
35" 4" x 5" 1375167-1
78" 4" x 5" 1375260-1
Single-Sided Panels
Description Part Number
2U (3.5") Management Panel 558331-1
Description Part Number
Single Vertical Management Ring 558334-1
Double Vertical Management Ring 406498-1
Cable Management Rings
Cable Support Bars
Description Part Number
Mounts to back of rack, 5" deep 557548-1
Mounts to back of rack, 2" deep 406042-1
Mounts to rear of cable management panels, 558301-1
part numbers 558329-1 and 558331-1
Mounts to rear of 110Connect patch panels 569590-1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
AP10 39669 Cable Manage.DS-6 2/21/01 3:19 PM Page 4
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
AMP NETCONNECT
Cable Management
•Cable management accessories
for EIA standard 19-inch
equipment racks
•Suitable for high-performance
twisted pair and optical fiber
distribution cables and patch cords
•Horizontal and vertical finger duct
panels available in single- and
double-sided versions
•D-ring style panels and
vertical managers
•“Towel bar” cable support bars
•Racks and shelves manufactured
from durable heavy gauge steel
for strength and reliability
•Durable, attractive powder coat
finish eliminates edge burrs for
enhanced appearance and safety
•Racks have front and rear threaded
mounting holes
One of the major challenges facing cabling
installers and maintenance personnel is organizing
distribution cables and patch cords in the
telecommunications room. AMP NETCONNECT
cable management products will help ensure that
your racks are well organized and maintained from
the day they’re installed through the last move,
add or change.
1308359-Rev.1-15M-M/LHC-HA-2/01 Printed in USA
In the U.S. 1-800-553-0938
Canada 905-475-6222
Mexico 525-729-0400
South and Central Americas 54-11-4733-2200
www.ampnetconnect.com
e-mail: networking.help@tycoelectronics.com
©Copyright 2001 Tyco Electronics Corporation. All rights reserved.
AMP, AMP NETCONNECT, AMP-TY, NETCONNECT and Tyco are trademarks.
Velcro is a trademark of Velcro Industries B.V.
Velcro®Cable Ties
Description Part Number
1" x 8" (pkg of 10) 1375253-X
1" x 12" (pkg of 10) 1375254-X
5/8" x 5 yards 1375255-X
1" x 12" Flame Retardant* 1375256-2
X denotes color: -2 = Black, -3 = White, -4 = Gray, -5 = Orange,
-6 = Blue, -7 = Red, -8 = Yellow, -9 = Green, 1- -0 = Violet
*Complies with NEC 300-22(c) and (d) for use in environmental air
handling spaces.
AMP-TY Nylon Cable Ties
Dimensions Color Minimum Tensile Maximum Bundle Package Part
Length Width Thickness Strength Diameter Quantity Number
Natural 1000 2-604771-9
4" .096" .037" Black 18 lbs .75 1000 2-604771-0
103.0 2.44 .94 Natural 80.1 N 19.1 100 1-604771-9
Black 100 1-604771-0
Natural 1000 2-603227-9
6" .140" .045" Black 30 lbs 1000 2-603227-0
155.0 3.56 1.14 Natural 133.5 N 100 1-603227-9
Black 100 1-603227-0
Natural 1000 2-604772-9
8" .184" .047" Black 50 lbs 1.75 1000 2-604772-0
204.0 4.67 1.19 Natural 222.5 N 44.45 100 1-604772-9
Black 100 1-604772-0
Natural 1000 2-604751-9
12" .183" .051" Black 50 lbs 3.0 1000 2-604751-9
300.0 4.65 1.30 Natural 222.5 N 76.2 100 1-604751-9
Black 100 1-604751-0
Note: Italics denotes millimeter dimension.
Rack Alignment Kit
•Used to align two racks mounted side-by-side
•Provides continuity from rack to rack
•Includes ground bar, splice bar and mounting hardware
AMP NETCONNECT Cable ManagementAMP NETCONNECT Cable Management
Description Part Number
Grounding Bar Kit 1435058-1
Description Part Number
Rack Alignment Kit 1435059-1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Grounding Bar Kit
Note: Grounding requirements may vary. Always consult local
regulations to assure compliance.
AP10 39669 Cable Manage.DS-6 2/21/01 3:19 PM Page 1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
AMP NETCONNECT
Cable Management
•Cable management accessories
for EIA standard 19-inch
equipment racks
•Suitable for high-performance
twisted pair and optical fiber
distribution cables and patch cords
•Horizontal and vertical finger duct
panels available in single- and
double-sided versions
•D-ring style panels and
vertical managers
•“Towel bar” cable support bars
•Racks and shelves manufactured
from durable heavy gauge steel
for strength and reliability
•Durable, attractive powder coat
finish eliminates edge burrs for
enhanced appearance and safety
•Racks have front and rear threaded
mounting holes
One of the major challenges facing cabling
installers and maintenance personnel is organizing
distribution cables and patch cords in the
telecommunications room. AMP NETCONNECT
cable management products will help ensure that
your racks are well organized and maintained from
the day they’re installed through the last move,
add or change.
1308359-Rev.1-15M-M/LHC-HA-2/01 Printed in USA
In the U.S. 1-800-553-0938
Canada 905-475-6222
Mexico 525-729-0400
South and Central Americas 54-11-4733-2200
www.ampnetconnect.com
e-mail: networking.help@tycoelectronics.com
©Copyright 2001 Tyco Electronics Corporation. All rights reserved.
AMP, AMP NETCONNECT, AMP-TY, NETCONNECT and Tyco are trademarks.
Velcro is a trademark of Velcro Industries B.V.
Velcro®Cable Ties
Description Part Number
1" x 8" (pkg of 10) 1375253-X
1" x 12" (pkg of 10) 1375254-X
5/8" x 5 yards 1375255-X
1" x 12" Flame Retardant* 1375256-2
X denotes color: -2 = Black, -3 = White, -4 = Gray, -5 = Orange,
-6 = Blue, -7 = Red, -8 = Yellow, -9 = Green, 1- -0 = Violet
*Complies with NEC 300-22(c) and (d) for use in environmental air
handling spaces.
AMP-TY Nylon Cable Ties
Dimensions Color Minimum Tensile Maximum Bundle Package Part
Length Width Thickness Strength Diameter Quantity Number
Natural 1000 2-604771-9
4" .096" .037" Black 18 lbs .75 1000 2-604771-0
103.0 2.44 .94 Natural 80.1 N 19.1 100 1-604771-9
Black 100 1-604771-0
Natural 1000 2-603227-9
6" .140" .045" Black 30 lbs 1000 2-603227-0
155.0 3.56 1.14 Natural 133.5 N 100 1-603227-9
Black 100 1-603227-0
Natural 1000 2-604772-9
8" .184" .047" Black 50 lbs 1.75 1000 2-604772-0
204.0 4.67 1.19 Natural 222.5 N 44.45 100 1-604772-9
Black 100 1-604772-0
Natural 1000 2-604751-9
12" .183" .051" Black 50 lbs 3.0 1000 2-604751-9
300.0 4.65 1.30 Natural 222.5 N 76.2 100 1-604751-9
Black 100 1-604751-0
Note: Italics denotes millimeter dimension.
Rack Alignment Kit
•Used to align two racks mounted side-by-side
•Provides continuity from rack to rack
•Includes ground bar, splice bar and mounting hardware
AMP NETCONNECT Cable ManagementAMP NETCONNECT Cable Management
Description Part Number
Grounding Bar Kit 1435058-1
Description Part Number
Rack Alignment Kit 1435059-1
Ad Prepared by: Mullen|LHC Description: Cable Management Data Sheet-Rev.1
Client: AP10 Job#:39669 Size: 8.5" x 11" w/3-hole punch
Grounding Bar Kit
Note: Grounding requirements may vary. Always consult local
regulations to assure compliance.
AP10 39669 Cable Manage.DS-6 2/21/01 3:19 PM Page 1
