Hyper TOPLED Hyper-Bright LED LS T676, LA T676, LO T676, LY T676 Besondere Merkmale Features * package: white P-LCC-2 package * feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 633 nm (super-red), 617 nm (amber), 606 nm (orange), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red) * grouping parameter: luminous intensity * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8-mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * Gehausetyp: weies P-LCC-2 Gehause * Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 633 nm (super-rot), 617 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Applications * traffic lights (EN 12368, only for amber ; EN 12368, ITE VTCSH part 2, for super-red, verde, yellow) * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * optical indicators * coupling into light guides * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) * interior and exterior automotive lighting (e.g. dashboard backlighting, brake lights, turn signal lamps, etc.) * substitution of micro incandescent lamps * marker lights * signal and symbol luminaire Anwendungen * Ampelanwendung (EN 12368, nur fur amber gultig; EN 12368, ITE VTCSH part 2, fur super-rot, verde, gelb gultig) * Informationsanzeigen im Innen- und Auenbereich (z. B. im Verkehrsbereich; Laufschriftanzeigen) * optischer Indikator * Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z. B. Instrumentenbeleuchtung, Bremslichter und Blinklichter) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung * Signal- und Symbolleuchten 2001-11-26 1 LS T676, LA T676, LO T676, LY T676 Lichtstarke Lichtstrom Bestellnummer Luminous Intensity IF = 20 mA IV (mcd) Luminous Flux IF = 20 mA V (mlm) Ordering Code colorless clear 45 ... 90 71 ... 180 190 (typ.) 360 (typ. Q62703-Q5096 Q62703-Q5097 amber colorless clear 71 ... 140 112 ... 280 310 (typ.) 560 (typ.) Q62703-Q4982 Q62703-Q4983 LO T676-Q2R2-1 LO T676-R2T1-1 orange colorless clear 90 ... 180 140 ... 355 390 (typ.) 740 (typ.) Q62703-Q5048 Q62703-Q5049 LY T676-Q1R1-1 LY T676-R1S2-1 yellow colorless clear 71 ... 140 112 ... 280 310 (typ.) 560 (typ.) Q62703-Q5134 Q62703-Q5135 Typ Emissionsfarbe Type Color of Emission LS T676-P1Q1-1 LS T676-Q1R2-1 super-red LA T676-Q1R1-1 LA T676-R1S2-1 Farbe der Lichtaustrittsflache Color of the Light Emitting Area Anm.: -1 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -1 Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2001-11-26 2 LS T676, LA T676, LO T676, LY T676 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS, LA, LO LY Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current IF 30 mA Stostrom Surge current t 10 s, D = 0.005 IFM Sperrspannung Reverse voltage VR 3 V Leistungsaufnahme Power consumption TA 25 C Ptot 80 mW 500 K/W 280 K/W Warmewiderstand Thermal resistance Rth JA Sperrschicht/Umgebung Junction/ambient Rth JS Sperrschicht/Lotpad Junction/solder point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2) 2001-11-26 3 1 0.2 A LS T676, LA T676, LO T676, LY T676 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS LA LO LY Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA (typ.) peak 645 622 610 591 nm Dominantwellenlange 1) Dominant wavelength IF = 20 mA (typ.) dom 633 6 617 6 606 6 587 nm +8/-7 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 120 Grad deg. Durchlassspannung 2) Forward voltage IF = 20 mA (typ.) (max.) VF VF 2.0 2.4 2.0 2.4 2.0 2.4 2.0 2.4 V V Sperrstrom Reverse current VR = 3 V (typ.) (max.) IR IR 0.01 0.01 0.01 0.01 A A 10 10 10 10 Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.01 0.06 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.8 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 7 11 11 11 lm/W 1) Wellenlangengruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelength groups are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Volltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 2001-11-26 4 LS T676, LA T676, LO T676, LY T676 1) Wellenlangengruppen / Wavelength groups Gruppe Group yellow orange min. max. min. Einheit Unit max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 609 612 nm 6 592 595 nm . Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstarke Luminous Intensity IV (mcd) P1 P2 Q1 Q2 R1 R2 S1 S2 T1 45 ... 56 ... 71 ... 90 ... 112 ... 140 ... 180 ... 224 ... 280 ... Lichtstrom Luminous Flux V (mlm) 56 71 90 112 140 180 224 280 355 150 (typ.) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: S2-3 Example: S2-3 Lichtgruppe Luminous Intensity Group Halbgruppe Half Group Wellenlange Wavelength S 2 3 2001-11-26 5 LS T676, LA T676, LO T676, LY T676 Relative spektrale Emission Irel = f (), TA = 25 C, IF = 20 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve OHL00235 100 Irel % 80 V 60 yellow orange amber super-red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik Irel = f () Radiation Characteristic 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2001-11-26 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS T676, LA T676, LO T676, LY T676 Durchlassstrom IF = f (VF) Forward Current TA = 25 C Relative Lichtstarke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 C OHL00233 10 1 OHL00232 10 2 mA 5 IV I V (20 mA) IF 10 0 5 10 1 5 10 -1 5 10 super-red yellow orange/amber 0 10 -2 5 5 10 -1 1 1.4 1.8 2.2 2.6 10 -3 -1 10 3 V 3.4 5 10 0 5 10 1 IF VF Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 20 mA OHL01031 35 mA 10 2 OHL00238 IV 2.0 I F mA IV (25 C) 30 1.6 TS orange yellow amber super-red 25 TA 1.2 20 15 0.8 10 0 0.4 TA temp. ambient TS temp. solder point 5 0 20 40 60 0 -20 80 C 100 0 20 40 60 C 100 TA T 2001-11-26 orange yellow amber super-red 7 LS T676, LA T676, LO T676, LY T676 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LA, LO IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LA, LO OHL00318 100 A IF 100 A 5 5 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 10-1 5 D= T D= T tP IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 tP IF T 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2001-11-26 tP D= 5 tP OHL01427 tp 8 LS T676, LA T676, LO T676, LY T676 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY IF 10 A OHL00316 0 5 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY t D = TP tP IF IF 100 A 5 T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-1 5 5 D= T tP IF T 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2 tp 2001-11-26 tP D= D= 10-1 OHL01432 tp 9 LS T676, LA T676, LO T676, LY T676 Mazeichnung Package Outlines 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 1.7 (0.067) 0.1 (0.004) (typ.) 0.5 (0.020) 1.1 (0.043) Cathode marking 0.9 (0.035) 0.7 (0.028) 3.7 (0.146) 3.3 (0.130) 41 (2.4) (0.095) 3.4 (0.134) 3.0 (0.118) 2.1 (0.083) 0.18 (0.007) 0.12 (0.005) 0.6 (0.024) 0.4 (0.016) GPLY6724 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Kathodenkennung: abgeschragte Ecke Cathode mark: bevelled edge Gewicht / Approx. weight: 40 mg 2001-11-26 10 LS T676, LA T676, LO T676, LY T676 Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 300 C T 250 240-245 C 10-40 s 200 183 C 120 to 180 s Ramp-down rate up to 6 K/s 150 Defined for Preconditioning: up to 6 K/s 100 Ramp-up rate up to 6 K/s 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 t 2001-11-26 11 s 250 LS T676, LA T676, LO T676, LY T676 Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2001-11-26 12 s 250 LS T676, LA T676, LO T676, LY T676 Empfohlenes Lotpaddesign Recommended Solder Pad IR-Reflow Loten / Wellenloten (TTW) IR Reflow Soldering / TTW Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 4.5 (0.177) 1.5 (0.059) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 Lotstopplack Solder resist OHLPY970 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2001-11-26 13 LS T676, LA T676, LO T676, LY T676 Gurtung / Polaritat und Lage Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 4 (0.157) C 8 (0.315) 1.75 (0.069) 2 (0.079) 3.5 (0.138) 2.9 (0.114) 4 (0.157) 3.6 (0.142) 1.5 (0.059) A OHAY2271 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch) 2001-11-26 14 LS T676, LA T676, LO T676, LY T676 Revision History: 2001-11-26 Previous Version: 2001-02-13 Page Subjects (major changes since last revision) 4 value (wavelength amber) Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-11-26 15