REVISION CD 1. C REPRESENTS A CRITICAL DIMENSION 2. MINIMUM PUSHOUT FORCE: .5LB (8 OZ) 3. ONE POSITON WILL BE LOST FOR EVERY CUT MADE ON A SOCKET STRIP 4. TUBE PACKAGE POSITIONS 5-50 ONLY. POSITIONS 2-4 ARE TO BE LAYERED PACKAGED. 5. SHEAR TAILS TO DIMENSIONS SHOWN 6. PARTS TO BE SYMMETRICAL ABOUT CL WITHIN .0015[0.038]. 7. ENDWALL AFTER CUTTING: .0185[0.470].0025[0.064] 8. VOID CORES MAY NOT BE PRESENT. CD 9. HAND FILL USE C-106-01-XX. AUTOMATION USE C-106-22-XX. C-106-02-XX CAN BE SUBBED FOR C-106-22-XX. C 10. MAX CUT FLASH: .010[0.27] WITH NO FLASH ALLOWED IN HOLES OR EXTENDING BELOW LEADS. C 11. MAX BURR: .005[.13]. CLP-1XX-XX-XXX-D-XX No OF POSITIONS PER ROW -02 THRU -50 OPTION -P: PICK & PLACE PAD (USE MPP-01) (AVAILABLE ON POSITON -05 THRU -50 ONLY) (NOT AVAILABLE WITH -PA OR -K OPTIONS) (SEE FIG. 3, SHT 2) -A: ALIGNMENT PIN (USE CLP-XX-D-XX) (NOT AVAILABLE WITH -PA OPTION) (SEE FIG. 3, SHT 2) -TR: TAPE AND REEL -BE: BOTTOM ENTRY ONLY (USE CLP-XX-DBE-XX) -PA: PICK & PLACE PAD WITH ALIGNMENT PINS (NOT AVAILABLE WITH -P, -A, OR -K OPTIONS) (SEE SHT 2, TABLE 3) -K: POLYIMIDE FILM PAD (POSITIONS -05 THRU -50 ONLY) (USE K-500-300, SEE FIG. 5, SHT 2) (.005[0.13] THICKNESS WITH SILICONE ADHESIVE) (NOT AVAILABLE WITH -P OR -PA OPTIONS) LEAD STYLE SPEC -02: SURFACE MOUNT (USE C-106-X2-XXX) (SEE NOTE 9) BODY SPEC -D: DOUBLE ROW (USE CLP-XX-D) PLATING SPEC (VALUES GIVEN ARE IN MICRO-INCHES) -F: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -L: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -S: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -G: GOLD, 10 Au / 50 Ni MIN ON CONTACT, 3 Au / 50 Ni MIN ON TAIL -H: HEAVY GOLD, 30 Au / 50 Ni MIN ON CONTACT, 3 Au / 50 Ni MIN ON TAIL -LM: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -FM: FLASH SELECTIVE, 3 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -SM: SELECTIVE, 30 Au / 50 Ni MIN ON CONTACT, MATTE TIN TAIL -LTL: LIGHT SELECTIVE, 10 Au / 50 Ni MIN ON CONTACT, TIN/LEAD (90/10+/-5%) TAIL No OF POS x .0500[1.270]) - .0500[1.270] (TOLERANCE ACCUM .0020[0.051]) C .034 0.85 REF (No OF POS X .0500[1.270]) + .017[0.43].008[0.20] (SEE NOTE 3 AND 7) 02 .120 3.05 REF .050 1.27 REF 01 -D CLP-XX-D-XX -D-BE CLP-XX-DBE-XX "A" "B" "A" "B" C +.003 +0.08 .090 - .001 2.29 - 0.03 (MEASURE AT BEND) +4 .084 2.12 REF -D .004[[0.10] POS. 02-35 .006[0.15] -D-BE .170.010 4.310.25 .016 0.41 x .005[0.13] REF 2.5 MAX SWAY (TYP) C-106-22-XXX -3 SECTION "A"-"A" UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] -D-BE FIG. 1 SECTION "B"-"B" (-D-BE BODY: CLP-XX-DBE-XX) (DIFFERENT AS SHOWN, OTHERWISE SAME AS -D BODY) (-D BODY: CLP-XX-D-XX) DECIMALS -D POS. 36-50 MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 INSULATOR: LCP, UL 94 VO, COLOR: BLACK CONTACT: PHOS BRONZE F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: LOW PROFILE .050 x .050 DOUBLE ROW ASM DWG. NO. CLP-1XX-XX-XXX-D-XX BY: PURVIS 01/31/1994 SHEET 1 OF 3 FIG. 3 REVISION CD C -P: PICK AND PLACE PAD (AVAILABLE ON POSITION 05 THRU 50 ONLY) (NOT AVAILABLE WITH -PA OR -K OPTIONS) "N" (SEE NOTE) C "Q" 3.45 (SEE NOTE) .100 2.54 .005 X 45 REF (TYP 4 SIDES) .019 0.47 (No OF POS x .0500[1.270]) - .100[2.54] 22.86 MPP-01 .250 6.35 REF .0070 0.178 REF (TYP) FIG. 2 .025 0.6350 REF (TYP) -A: ALIGNMENT PIN (3 POSITION MINIMUM) (NOT AVAILABLE WITH -PA OPTION) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1) .0100 0.254 REF (TYP) .0050 0.127 REF (TYP) C C .121 3.07 "M" C "P" AVAILABLE ON POSITIONS 05 THRU 50 ONLY NOTE: "N" = USED MEASURED DIMENSION (REF) "Q" = [("N" - .250[6.35])/2] .020[0.51] "A" .051 1.30 C "R" (SEE NOTE) .019.010 0.480.25 .035 0.89 REF .325 8.26 REF C "T" PPP-38-X-X-XX .275 6.99 C "S" (SEE NOTE) .095 2.41 .1575.0050 4.0000.127 FIG. 5 FIG. 4 -K: POLYIMIDE FILM PAD (AVAILABLE ON POSITION 05 THRU 50 ONLY) (NOT AVAILABLE WITH -P OR -PA OPTIONS) -PA: PICK & PLACE PAD WITH ALIGNMENT PINS (NOT AVAILABLE WITH -P, -A OR -K OPTIONS) NOTE: "R" = USED MEASURED DIMENSION (REF) "S" = {("R" - .1575[4.000])/2} .020[0.51] PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: LOW PROFILE .050 x .050 DOUBLE ROW ASM DWG. NO. CLP-1XX-XX-XXX-D-XX BY: PURVIS 01/31/1994 SHEET 2 OF 3 REVISION CD PACKAGING (SEE NOTE 4, SHEET 1) PT-CLP001-PA PT-CLX-002-D PT-CLX-001-D PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 * = IF APPLICABLE F:\DWG\MISC\MKTG\CLP-1XX-XX-XXX-D-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: LOW PROFILE .050 x .050 DOUBLE ROW ASM DWG. NO. CLP-1XX-XX-XXX-D-XX BY: PURVIS 01/31/1994 SHEET 3 OF 3