4.0 Amps Single Phase Full Wave Bridge Rectifier
IO(AV) = 4A
VRRM = 200/ 600V
4GBU..LS Series
1
Bulletin I2789 rev. B 03/03
Features
Diode chips are glass passivated
Suitable for Universal hole mounting
Easy to assemble & install on P.C.B.
Surge Current Capability - 90APK
High Isolation between terminals and molded case (1500VRMS)
Lead free terminals solderable as per MIL-STD-750, Method 2026
Terminals suitable for High Temperature soldering guaranteed at
260°C/ 8-10secs
UL E160375 approved
Description
These 4GBU.. Series of Single Phase Bridges
consist of four glass passivated silicon junction
connected as a Full Wave Bridge. These four
junctions are encapsulated by plastic molding
technique. These Bridges are mainly used in
Switch Mode power supply and in industrial and
consumer equipment.
Parameters 4GBU..LS Units
Major Ratings and Characteristics
IO4A
@ TC100 °C
IFSM @ 50Hz 90 A
@ 60Hz 94 A
I2t @ 50Hz 40 A2s
@ 60Hz 36 A2s
VRRM range 200 to 600 V
TJ- 55 to 150 oC
GBU
www.irf.com
4GBU..LS Series
2
Bulletin I2789 rev. B 03/03
www.irf.com
IOMaximum DC output current 4 A TC = 100°C, Resistive & inductive load
3.2 TC = 100°C, Capacitive load
IFSM Maximum peak, one-cycle 90 t = 10ms, 20ms
non-repetitive surge current,
following any rated load condition 94 t = 8.3ms, 16.7ms TJ = 150°C
and with rated VRRM reapplied
I2t Maximum I2t for fusing, 40 A 2s t = 10ms
initial TJ = TJ max 36 t = 8.3ms
VFM Maximum peak forward voltage 0.975 V TJ = 25 oC, IFM = 2A
per diode
IRM Typical peak reverse leakage 5 µA TJ = 25 oC, 100% VRRM
curren t per diode
VRRM Maximum repetitive peak 200 to 600 V
reverse voltage range
Forward Conduction
Voltage VRRM , max repetitive VRMS , max VRSM , max non-repetitive IRRM max. IRRM max.
Type number Code peak rev. voltage RMS voltage peak rev. voltage @ rated VRRM @ rated VRRM
TJ = TJ max. TJ = TJ max. TJ = TJ max. TJ = 25°C TJ = 150°C
VV VµAµA
4GBU..LS 02 200 140 300 5 250
4GBU..LSF 04 400 280 500 5 250
06 600 420 700 5 250
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Parameters 4GBU..LS Unit Conditions
TJOperating and storage -55 to 150 oC
Tstg temperature range
RthJC Max. thermal resistance 5.0 °C/ W DC rated current through bridge (1)
junction to case
RthJA Thermal resistance, 26 °C/ W DC rated current through bridge (1)
junction to ambient
W Approximate weight 4 (0.14) g (oz)
T Mounting Torque 1.0 Nm Bridge to Heatsink
9.0 Lb.in
Thermal and Mechanical Specifications
Parameters 4GBU..LS Unit Conditions
Note (1): Devices mounted on 40x 40x1.5mm aluminum plate; use silicon thermal compound for maximum heat
transfer and bolt down using 3mm screw
4GBU..LS Series
3
Bulletin I2789 rev. B 03/03
www.irf.com
Fig. 2 - Forward Voltage Drop Characteristics
Fig. 1 - Current Ratings Characteristics
Fig. 4 - Maximum Non-Repetitive Surge Current
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
Maximum Allowable Case Temperature (°C)
Average Forward Current (A)
Number of Equal Amplitude Half Cycle Current Pulses (N)
Peak Half Sine Wave Forward Current (A)
Fig. 3 - Total Power Loss Characteristics
Maximum Average Forward Power Loss (W)
Average Forward Current (A)
90
100
110
120
130
140
150
012345
180˚
(Sine)
180˚
(Rect)
0.1
1
10
100
0.5 1 1.5 2 2.5 3
T = 25˚C
J
T = 150˚C
J
0
1
2
3
4
5
6
7
8
01234
180˚
(Sine)
180˚
(Rect)
T = 150˚C
J
20
30
40
50
60
70
80
90
100
1 10 100
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
Initial Tj = 150˚C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
4GBU..LS Series
4
Bulletin I2789 rev. B 03/03
www.irf.com
1- Bridge current
2- Basic Part Number
3- Voltage Code: code x 100 = VRRM
4- Low surge
5- Lead Forming:7.5 mm
4 GBU 06 LS F
123
Ordering Information Table
Device Code
4 5
Outline Table
4GBU..LS
4GBU..LS Series
5
Bulletin I2789 rev. B 03/03
www.irf.com
Outline Table
Add suffix "F" for 7.5 mm equal space lead forming
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 03/03
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial and Consumer Level.
Qualification Standards can be found on IR's Web site.
4GBU..LSF
