3792-PPG - 3M Electronic Specialty

Speed and versatility

for applications success

3M™Scotch-Weld™ Hot Melt Bonding Systems

&packaging

Assembly

Reference guide

• Easily secure wires to resist strain and breakage

• Rigidize components on printed circuit boards to add

stability during assembly, shipping and end use

• Quick setting for potting even at great depth

• Terminate coils

• Cable strain relief

• Bundle wires for convenient handling

Go to

adhesives

Alternatives

3748VO: Light yellow, non-corrosive to

copper, self extinguishing

3779: Amber, high heat resistance,

high strength

3748: Off-white, non-corrosive to

copper

3764: Clear, bonds HSE/LSE plastics

3797: Off-white, good for potting

Application Success:

Electronics

and Electrical

Do 3M™Scotch-Weld™Hot Melt Adhesives offer the best options

for success with your assembly and/or closure application?

Answers to the following questions can help you decide.

Would you like to improve your production speed and ease?

3M™Scotch-Weld™Hot Melt Adhesives liquefy when heated

and quickly fill gaps and wet the bonding surface. Applied to only

one surface, they cool, harden, and reach bond strength in

seconds. You can move assemblies immediately and eliminate

clamps, fixturing, and drying time and energy. Each adhesive

is engineered for efficient application with an easy-to-use 3M

portable applicator. Minimal operator training.

Would you like to improve appearance?

Unlike mechanical fasteners and sealing tapes, hot melt

adhesive is virtually invisible between the mating surfaces.

What surfaces do you want to combine?

As you can see on pages 4 and 5, you can combine a wide variety

of materials ranging from wood to corrugated cardboard, and

even heat-sensitive foam.

How much strength do you need?

Select from a wide range of non-structural shear and peel

strengths as shown on page 7. Structural strength has been

defined as a minimum of 1,000 psi in overlap shear to

permanently bond load-bearing components. Hot melt

non-structural applications range from case sealing to bonding

wood stiffeners to drawer bottoms, and securing components

on a PC board.

What is the temperature in the end use environment?

Hot melts are 100% solids thermoplastic resins that can

re-melt after bonding if exposed to high enough temperature.

As you can see on page 7, there are many options for selecting

melt point and heat resistance for your specific application.

Do you need to reposition parts or delay assembly after

adhesive application?

Open time or bonding range is the maximum time between

applying adhesive and joining the surfaces. The more quickly

you join surfaces, the better the wetting action and bond. With

3M™Scotch-Weld™Hot Melt Adhesives you have wide latitude

in bonding range selection as shown on page 7.

Applications Success with 3M™

Scotch-Weld™ Hot Melt Adhesives

• Bond and seal any size and configuration of corrugated

carton quickly and invisibly including RSCs, FOLs, and

5-panel folded

• Securely bond lightly waxed surfaces that may be

difficult for tape to seal

• Attach inserts including heat-sensitive foam

• Self-contained portable applicator saves the cost of bulk

equipment for recouperage, manual random size case

sealing, and many contract packaging situations

Go to

adhesives

Alternatives

3762: Economical, tan, fast-setting

with “hot tack”

3762LM: Light amber, low melt version

of 3762

3738: Tan with high delivery rate,

longer open time than 3762

3750: Tan, low viscosity for high flow

3764: Clear, stays flexible at low temp

• Bond foam spacers into 3-dimensional corrugated

cardboard POP display

• Attach samples of wood flooring, laminates, foams, fabric,

or other materials and small products to display board

• Attach decorations to baskets

• Assemble dried floral arrangements

• Bond polystyrene foam and other materials used in

counter top displays, jewelry cases, and exhibitor booths

Go to

adhesives

Alternatives

3762LM: Light amber, fast-setting, low

melt for heat sensitive surfaces

3792LM: Clear, multi-purpose low melt

for heat sensitive surfaces

3748: Off-white, bonds polyolefins

3755LM: Clear, delayed tack, applied as

ribbon for paper, corrugated

3764: Clear, bonds HSE/LSE plastics

Application Success:Application Success:

Adhesive

Point-of-Purchase,

Displays, Trade Exhibits

Manual and Corrugated

Carton Sealing

10 11

• Wood to wood assembly of non-structural components in

home and office furniture and cabinetry

• “Third-hand” holding components while structural wood

adhesive cures

• Bond fabric to wood for welting and gimping

• Secure drawer bottoms, guides, and stiffeners

• Attach upholstery to wood and plastic

• Assemble decorative crown moldings

Go to

adhesives

Alternatives

3792: Clear, multi-purpose for wood,

fabric, and upholstery

3792LM: Low melt version of 3792 for

heat sensitive surfaces

3738: Tan, high delivery rate

3747: Tan, bonds variety of wood,

plastics, and lightweight metal

3789: Brown, impact resistant

• Bond metal or plastic nameplates to trophies

• Assemble or repair foundry sand cores

• Attach removable credit cards or samples to mailers

• Quick easy assembly of many materials in luggage and

carrying cases

• Assemble many materials used in novelties, toys, games,

and costumes

• Attach speaker fabric or protective metal grille

Go to

adhesives

Alternatives

3764: Clear, bonds HSE/LSE plastics,

flexible at low temp

3792LM: Clear, multi-purpose low melt

for heat sensitive surfaces

3748: Off-white, resists thermal

shock, bonds polyolefins

3796: Tan, hi-performance on thin metal

3798LM: Clear removable “gummy glue”

Furniture and

Woodworking

Application Success:

Product

Assembly

Application Success:

Substrate Combinations

for Applications Success

Low melt adhesives * E.g., polyethylene

** E.g., ABS, PVC, acrylic

*** Beadboard/styrene

Substrate Wood Thin Metal Glass or Vinyl Leather Polyolefin*

ceramic

Wood 3747 3776LM 3747 3776LM 3747 3792LM 3789 N/R 3789 N/R 3731 3792LM

3789 3762LM 3796 3764 3779 3779 3748

3738 3792LM 3796 3796 3796 3764

3750LM 61111

Thin Metal 3747 3776LM 3747 3776LM 3796 N/R 3796 N/R 3796 N/R

3796 3796

Glass or 3747 3792LM 3796 N/R 3796 N/R 3764 3792LM

ceramic 3764 3748

3796

Vinyl 3789 N/R 3789 N/R 3796 N/R

3779 3779

3796 3796

Leather 3789 N/R 3796 N/R

3779

3796

Polyolefin* 3731 3792LM

3748

3764

61111

Plastic**

Paper

Uncoated

cardboard/

chipboard

Coated

cardboard/

chipboard

Fabric

Rigid

foam***

Flexible

foam

16111 is a family of products that includes 6111, 6111HT, and 6116.

2Removable

3Must be sprayed on rigid foam to prevent cavitation.

Plastic** Paper Uncoated Coated Fabric Rigid foam*** Flexible foam

cardboard/ cardboard/

chipboard chipboard

3764 3792LM 3762 3762LM 3762 3762LM 3764 3792LM 3738 3776LM 61111, 3 3792LM 3738 3792LM

3747 3776LM 3792 3755LM 3792 3792LM 3792 3776LM 3747 3792LM 3762LM 3764

3748 611113792LM 3738 3755LM 3747 611113755LM 3747

3750LM 3750 3750LM 61111

3747 3776LM 3747 3776LM 3747 3776LM 3747 3776LM 3747 3776LM N/R 3776LM 3747 3776LM

3796 3796 3796 3796 3796 3796

3764 3792LM 3747 3792LM 3747 3792LM 3764 3792LM 3747 3792LM N/R 3792LM 3747 3792LM

3747 3764 3764 3747 3764 3764

3792 3796 3796 3796 3796

3789 N/R 3789 N/R 3789 N/R 3789 N/R 3789 N/R N/R N/R 3789 N/R

3796 3779 3779 3779 3779 3779

3779 3796 3796 3796 3796 3796

3789 N/R 3789 N/R 3789 N/R 3789 N/R 3789 N/R N/R N/R 3789 N/R

3779 3779 3779 3779 3779 3779

3796 3796 3796 3796 3796 3796

3731 3792LM 3731 3792LM 3764 3792LM 3731 3792LM 3731 3792LM 61111, 3 3792LM 3731 3792LM

3764 3764 3748 3764 3764 3748

3748 3748 611113748 3748 3764

6111161111611116111161111

3731 3792LM 3764 3792LM 3764 3792LM 3764 3792LM 3764 3792LM 61111, 3 3792LM 3764 3792LM

3764 3776LM 3747 3776LM 3747 3776LM 3747 3776 3792 3776LM 3776LM 3747 3776LM

3747 3748 3748 3748 3747 3748

3748 61111

3762 3762LM 3762 3762LM 3764 3792LM 3792 3792LM 61111, 3 3755LM 3762 3755LM

3793 3798LM23792 3792LM 3747 3776LM 3738 3755LM 3792LM 3792 3762LM

611113755LM 3738 3755LM 3792 3764 3762LM 3762LM 611113792LM

3792LM 3750 3750LM 3750LM 3750LM 3750LM

3750LM

3762 3762LM 3764 3792LM 3762 3792LM 61111, 3 3762LM 3762 3762LM

3792 3792LM 3747 3776LM 3792 3762LM 3792LM 3750 3792LM

3738 3755LM 3792 3738 3755LM 3776LM 3738 3755LM

3750 3750LM 611113750LM 3750LM 3792 3750LM

3731 3792LM 3764 3792LM 61111, 3 3792LM 3764 3792LM

3764 3776LM 3792 3776LM 3776LM 3792 3776LM

3792 3747 3747

3747

3738 3776LM 61111, 3 3762LM 3738 3776LM

3747 3792LM 3792LM 3747 3792LM

611113755LM 61111

3750LM

61111, 3 3792LM 611113792LM

3762LM 3762LM

3755LM 3755LM

3750LM 3750LM

3738 3792LM

3764

3747

61111

Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.

Product FDA UL 94 Features

(Color) Listed1Listing Application Ideas

3750LM N N/A • Excellent “hot tack”, fast setting for corrugated, beadboard, repack, recoup

Tan • Economical, general purpose • Use with AE II LT applicator only

3755LM Y N/A • “Delayed-tack” applied in thin-glue-line ribbon for paper, corrugated, chipboard, displays, exhibits

Clear • Use with low melt applicator only

3762LM* Y N/A • Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood

Lt. Amber • Economical, general purpose • Use with low melt applicator only

3776LM N/A N/A • Bonds variety of plastics, woods and light-gauge metals

Tan • Use with low melt applicator only

3792LM* Y V2 • Clear, multi-purpose for wood, coated paper, polyolefins and other heat-sensitive materials

Clear • P.O.P. displays • Use with low melt applicator only

3798LM* Y N/A • Removable "gummy glue" for many substrates

Lt. yellow • Removes easily without residual tack • Use with low melt applicator only

3731* N N/A • High heat resistance

Tan • Bonds plastics including polyethylene, polypropylene

3738* Y V2 • High delivery rate and long bonding range • General purpose for foundry sand cores, wood bonding,

Tan corrugated, selected plastics and chipboard

3747 Y N/A • General purpose for wide variety of plastics, wood and lightweight metals

Tan

3748* Y V2 • Good thermal shock resistance • Non-corrosive to copper for many electronic applications

Off-white • Bonds polyolefins

3748 VO N VO • Self-extinguishing version of 3748

Light Yellow • Meets UL 1410 requirements

3750 N N/A • Low viscosity for high flow rate, increased production

Tan • Good hot tack, quick grab for packaging and woodworking

3750 N N • Low viscosity for high flow rate, increased production

Clear • Good hot tack, quick grab for packaging and woodworking

3762 Y V2 • Excellent “hot tack”, fast setting for corrugated, beadboard, recouperage, repacking chipboard, wood

Tan • Economical, general purpose

3764* Y V2 • Bonds variety of plastics including polycarbonate, polyethylene, and polypropylene

Clear • Flexible at low temperatures

3779* Y VO • High heat resistance • High strength

Amber • Good fuel and oil resistance • Electronics

3789* Y V2 • High performance for plastics • Impact resistant

Brown Brown • Bonds vinyl and wood • Good fuel and oil resistance

3792* Y V2 • Clear, multi-purpose for wood, corrugated, fabric,furniture, upholstery, novelties,

Clear and other lightweight materials

3796 N N/A • High performance for plastics and light-gauge metals

Lt. Tan

3797 Y V2 • High ball and ring • Low viscosity

Off-white • Good for electrical potting

3794 Hi Tack PSA Y N/A • Sprayable high tack PSA for bonding plastic, paper, metals, die-cut labels

Lt. Tan

6111 N N/A • Sprayable 100% solventless adhesive for most foams, fabrics, plastics, particle board,

Tan and thin metal

6111 NN/A• Same as 6111 tan but green in color.

Green

6111HT NN/A• Similar to 6111 but has higher heat resistance.

Tan

6111HT NN/A• Similar to 6111 but has higher heat resistance and blue in color.

Blue

6116 N N/A • Similar to 6111 but lower than normal viscosity and mainly used on fabrics.

Off-White

* Also available in bulk. (1) Made from components listed as indirect food additives under FDA regulations for adhesives (21 CFR 175.105).

(2) Brookfield Thermosel Viscometer in Centipoise.

(3) ASTM E-28-99 (4) Temperature at which adhesive fails (5) On canvas (6) On Douglas Fir (7) 1/8" semicircular bead, Douglas Fir to Douglas Fir.

Product

Information

Hot Melt Technology: Applied 350°–385°F (177°–196°C)

Bulk Only Low Melt Technology:

Applied 250°–270°F (127°–132°C)

Delivery Peel Shear Open

EC Temp Time (sec) Ball & Ring Heat Strength Strength Time

Control Viscosity for 1'' x 3'' Melt Point3Resistance4PIW 5PSI61/8'' Bead

Sizes Modules cps2Cartridge (°F/°C) (°F/°C) 72°F (22°C) 72°F (22°C) (sec)7

1/2" x 12"AE N/A 4000 45 200/95 128/54 6 475 25

@250°F

5⁄8" x 2"TC N/A 13,000 N/A 157/70 120/49 13 500 120

@250°F

5⁄8" x 8"Q 5⁄8" x 2"TC 1 4000 45 205/96 130/54 6 480 25

1" x 3"PG 1/2" x 12" @250°F

5⁄8" x 8"Q 1/2" x 12" 1 8250 47 184/84 140/60 9 600 40

1" x 3"PG @250°F

5⁄8" x 8"Q 5⁄8" x 2"TC 1 10,500 57 178/81 140/60 13 350 40

1" x 3"PG 1/2" x 12" @250°F

5⁄8" x 2"TC N/A 9500 N/A 191/88 120/49 N/A N/A 30

@250°F

5⁄8" x 8"Q 5 12,000 N/A 315/157 265/130 22 490 30

1" x 3"PG @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 4 2875 35 186/86 130/54 13 375 50

1" x 3"PG 1⁄2" x 12"AE @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 4 4100 45 220/104 145/63 20 430 45

1" x 3"PG 1⁄2" x 12"AE @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 4 5000 65 292/144 175/79 18 250 45

1" x 3"PG @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 4 5500 65 305/152 175/79 15 275 30

1" x 3"PG @375°F

1/2" x 12"AE N/A 1900 30-40 200/93 125/52 6 500 N/A

@375°F

1/2" x 12"AE N/A 4800 35-45 178/81 135/57 12 250 N/A

@375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 3 1870 30 201/94 130/54 7 545 35

1" x 3"PG 1⁄2" x 12"AE @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 4 6000 55 190/88 140/60 14 390 40

1" x 3"PG 1⁄2" x 12"AE @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 5 7000 75 325/163 300/149 18 700 25

1" x 3"PG @375°F

5⁄8" x 8"Q 5 5200 70 270/132 220/104 16 570 50

1" x 3"PG @375°F

5⁄8" x 8"Q 5⁄8" x 2"TC 4 5000 45 179/81 140/60 13 250 50

1" x 3"PG 1⁄2" x 12"AE @375°F

1" x 3"PG N/A 23,000 120 240/116 200/93 29 550 40

5⁄8" x 2"TC @375°F

1" x 3"PG N/A 2650 55 304/151 170/77 10 350 30

5⁄8" x 2"TC @375°F

2 lb. bricks N/A 15,000 N/A 224/107 120/49 16 N/A > 60

@325°F

.75"x.75" chips N/A 3,000-5,000 N/A 284/140 145/63 34 N/A 1 surface 60

@375°F 2 surface 360

.75"x.75" chips N/A 3,000-5,000 N/A 284/140 145/63 34 N/A 1 surface 60

@375°F 2 surface 360

.75"x.75" chips N/A 2,500-4,500 N/A 224/107 175/79 26 N/A 1 surface 180

@375°F 2 surface 480

.75"x.75" chips N/A 2,500-4,500 N/A 224/107 175/79 26 N/A 1 surface 180

@375°F 2 surface 480

.75"x.75" chips N/A 1,300 N/A 199/93 160/69 20 N/A 1 surface 120

@375°F 2 surface 300

N/A = Not available

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

Selecting a 3M™ Scotch-Weld™ Hot-Melt Applicator to fit your needs

3M™Scotch-Weld™Hot Melt Applicator LT.

Medium volume using low melt adhesive.

UPC# 021200-82245

3M™Scotch-Weld™Hot Melt Applicator TC.

Medium volume.

UPC# 021200-82244

3M™Scotch-Weld™Hot Melt Applicator TC

with Quadrack™Converter. Medium volume.

UPC# 021200-89445

3M™Scotch-Weld™Hot Melt Applicator AE II.

Low volume.

UPC# 021200-96594

3M™Scotch-Weld™

Hot Melt Applicator

EC. Medium

volume; variable

temperature control.

UPC# 021200-89519

3M™Scotch-Weld™Pneumatic Hot Melt

Applicator PG II LT with Speedloader. High volume

using low melt adhesive.

UPC# 021200-89395

3M™Scotch-Weld™Pneumatic Hot Melt

Applicator PG II with Speedloader.

High volume.

UPC# 021200-22033

3M™Scotch-Weld™Hot Melt Applicator LT

with Quadrack™Converter. Medium volume using

low melt adhesive.

UPC# 021200-89447

3M™Scotch-Weld™Hot Melt Applicator AE II LT.

Low volume using low melt adhesive.

UPC# 051115-25567

9726

9764

9777

9782

9916 9913 9917

9727

9929 9946 9785 9725 9922 9940 9921

Lightweight, easy-to-use units... 3M’s innovative melt-on-demand or progressive feed technology.

Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.

(1) Weight shown is for applicator only — does not include adhesive capacity. (2) Adhesive output will vary with conditions and the adhesive used. Values are approximate and are based on maximum steady-state flow.

(3) Temperatures shown are nominal control values. Actual temperature will range slightly above and below this value.

3M™ Scotch-Weld™ Weight(1) Output(2) Temperature(3) Power Adhesive Features Warranty

Hot Melt Applicators lb/hr (120V) dia. x length, (Months)

inches

LT 10.0 oz. 2.6 265°F (129°C) 150W 5/8 x 2 TC For use with 12

low melt adhesives

LT with Quadrack 13.8 oz. 2.6 265°F (129°C) 150W 5/8 x 8 Q

Converter

Pneumatic PG II LT 4.3 lbs. 6.0 265°F (129°C) 500W 1 x 3 PG Pneumatic high output 12

with Speedloader for low melt adhesives

AE II LT 20.0 oz. 4.0 265°F (129°C) 100W 1/2 x 12 AE All electric operation for 6

low melt adhesives

TC 10.0 oz. 3.5 385°F (196°C) 150W 5/8 x 2 TC Easy to use with 12

standard melt adhesives

TC with Quadrack 13.8 oz. 3.5 385°F (196°C) 150W 5/8 x 8 Q 12

Converter

Pneumatic PG II 4.3 lbs. 7.5 385°F (196°C) 500W 1 x 3 PG Pneumatic high output for 12

with Speedloader standard melt adhesives

AE II 20.0 oz. 4.0 400°F (204°C) 100W 1/2 x 12 AE All electric operation 6

for standard melt adhesives

EC 24.0 oz. 5.5 260°F-450°F 350W 5/8 x 8 Q Temperature modules to 12

(127°-232°C) operate with standard

and low melt adhesives

Accessories to improve your productivity

Increase loading capacity and

ease of operation with Quadrack

Converter and Palm Trigger.

Heavy-Duty Benchstands

provide added convenience.

Foot pedal, magazine feeder, and

benchmount accessories can provide

high capacity, hands-free operation for

3M™Scotch-Weld™PG II and

3M™ Scotch-Weld™PG II LT.

Magazine Feeder

Benchmount

Foot Pedal

Tip No. Description

9726

"T" Tip (shown with valve and adapter) for all 3M™Applicators

9764 3/4" Slotted Spreader (3755LM adhesive only)

9777 1/4" Slotted Spreader (3755LM adhesive only)

9782 1/2" Slotted Spreader (3755LM adhesive only)

9727

"L" Tip (shown with adapter and valve) for all 3M™Applicators

9916 3 Hole Spreader

9913 2 Hole Spreader (1/4" hole span)

9917 3 Hole 1" Spreader for

3M™

Applicator II only

9929 High Viscosity Valve (TC, EC, PG-II)

9946 .072" Brass Extension for

3M™

Applicators PG II and PG II LT only

9785

.070" Tapered Aluminum Extension for all 3M™Applicators

9725 Mini Extension Tip .072" Opening for all

3M™

Applicators

9922 .063" Fluted Tip

9940 .125" Fluted Tip

9921 .090" Fluted Tip

A general purpose tip (.090) is supplied with

each 3M™Scotch-Weld™Applicator. To increase

productivity, optional tips can provide multiple

beads, flat ribbons, guided beads for

carton sealing, and extended reach. Bench nozzle assembly

Low Melt Applicators

Hot Melt Applicators

Variable

40 41

Ordering

Information

*Non-stocked items

Product Color Size Container Size UPC SN

3750LM Tan 1/2"x12" AE 11 lbs 051115-31933 62-3758-9531-5

3755LM Clear 5/8" x 2" TC 11 lbs 021200-83535 62-3755-9830-7

3762LM Lt. Amber 1" x 3" PG 22 lbs 021200-49128 62-3720-9330-2

3762LM Lt. Amber 1/2" x 12" AE 11 lbs 051115-25579 62-3720-9531-5

3762LM Lt. Amber 5/8" x 2" TC 11 lbs 021200-49134 62-3720-9830-1

3762LM Lt. Amber 5/8" x 8" Q 11 lbs 021200-49125 62-3720-9132-2

3762LMB Lt. Amber Pellets 22 lbs 021200-49130 62-3720-9335-1

3762LMB* Lt. Amber Pellets 950 lbs 021200-49133 62-3720-9339-3

3776LM* Tan 1" x 3" PG 22 lbs 021200-89501 62-3733-9330-5

3776LM Tan 1/2" x 12" AE 11 lbs 021200-25583 62-3733-9531-8

3776LM Tan 5/8" x 8" Q 11 lbs 021200-89499 62-3733-9132-5

3792LM Clear 1" x 3" PG 22 lbs 021200-83491 62-3760-9330-8

3792LM Clear 1/2" x 12" AE 11 lbs 021200-25580 62-3760-9531-1

3792LM Clear 5/8" x 2" TC 11 lbs 021200-82456 62-3760-9830-7

3792LM Clear 5/8" x 8" Q 11 lbs 021200-82454 62-3760-9132-8

3792LMB Clear Pellets 22 lbs 021200-43778 62-3760-9335-7

3792LMB Clear Pellets 950 lbs 021200-49098 62-3760-9339-9

3798LM Lt. yellow 5/8" x 2" TC 11 lbs 021200-41604 62-3798-9830-7

3798LMB* Lt. yellow Chips 11 lbs 021200-43825 62-3798-9335-7

3731 Tan 5/8" x 2" TC 11 lbs 021200-45271 62-3731-9132-9

3731* Tan 1" x 3" PG 22 lbs 021200-49139 62-3731-9330-9

3731 Off-White Chips 22 lbs 021200-49140 62-3731-9335-8

3738 Tan 1" x 3" PG 22 lbs 021200-82609 62-3738-9330-4

3738 Tan 1/2" x 12" AE 11 lbs 021200-82594 62-3738-9531-7

3738 Tan 5/8" x 2" TC 11 lbs 021200-82610 62-3738-9830-3

3738 Tan 5/8" x 8" Q 11 lbs 021200-65262 62-3738-9132-4

3738B Tan Pellets 22 lbs 021200-89305 62-3738-9335-3

3738B* Tan Pellets 950 lbs 021200-49094 62-3738-9339-5

3747 Tan 1" x 3" PG 22 lbs 021200-82221 62-3747-9330-5

3747 Tan 1/2" x 12" AE 11 lbs 021200-82220 62-3747-9531-8

3747 Tan 5/8" x 2" TC 11 lbs 021200-82560 62-3747-9830-4

3747 Tan 5/8" x 8" Q 11 lbs 021200-82561 62-3747-9132-5

3748 Off-White 1" x 3" PG 22 lbs 021200-82585 62-3748-9330-3

3748 Off-White 5/8" x 2" TC 11 lbs 021200-82584 62-3748-9830-2

3748 Off-White 5/8" x 8" Q 11 lbs 021200-76374 62-3748-9132-3

3748B Off-White Chips 22 lbs 021200-43752 62-3748-9335-2

3748 Black 5/8" x 8" Q 11 lbs 021200-45242 62-3724-9132-4

3748VO* Lt. Yellow 1" x 3" PG 22 lbs 021200-85797 62-3768-9330-1

3748VO* Lt. Yellow 5/8" x 2" TC 11 lbs 021200-85816 62-3768-9830-0

3748VO Lt. Yellow 5/8" x 8" Q 11 lbs 021200-85795 62-3768-9132-1

3750 Tan 1/2" x 12" AE 11 lbs 021200-96269 62-3750-9531-2

3750 Clear 1/2" x 12" AE 11 lbs 021200-97353 62-3757-9531-7

3762 Tan 1" x 3" PG 22 lbs 021200-82614 62-3762-9330-4

3762 Tan 1/2" x 12" AE 11 lbs 021200-82596 62-3762-9531-7

3762 Tan 5/8" x 2" TC 11 lbs 021200-82615 62-3762-9830-3

3762 Tan 5/8" x 8" Q 11 lbs 021200-65261 62-3762-9132-4

3764 Clear 1" x 3" PG 22 lbs 021200-82598 62-3764-9330-0

3764 Clear 1/2" x 12" AE 11 lbs 021200-82597 62-3764-9531-3

3764 Clear 5/8" x 2" TC 11 lbs 021200-82599 62-3764-9830-9

3764 Clear 5/8" x 8" Q 11 lbs 021200-76054 62-3764-9132-0

3764B Clear Pellets 22 lbs 021200-87850 62-3764-9335-9

3764B Clear Pellets 950 lbs 021200-41526 62-3764-9337-5

3779 Amber 1" x 3" PG 22 lbs 021200-82602 62-3779 9330-8

3779 Amber 5/8" x 2" TC 11 lbs 021200-82603 62-3779-9830-7

3779 Amber 5/8" x 8" Q 11 lbs 021200-85799 62-3779-9132-8

3779B* Amber Pellets 22 lbs 021200-89307 62-3779-9335-7

3789 Brown 1" x 3" PG 22 lbs 021200-82371 62-3789-9330-7

3789 Brown 5/8" x 8" Q 11 lbs 021200-82369 62-3789-9132-7

3789* Brown Pellets 22 lbs 021200-89308 62-3789-9335-6

3792 Clear 1" x 3" PG 22 lbs 021200-82606 62-3792-9330-1

3792 Clear 1/2" x 12" AE 11 lbs 021200-82583 62-3792-9531-4

3M™Scotch-Weld™Hot Melt Adhesives

Hot Melt Technology:

Applied 350°–385°F (177°–196°C)

Low Melt Technology:

Applied 250°–270°F (127°–132°C)

*Non-stocked items

Product Color Size Container Size UPC SN

3792 Clear 5/8" x 2" TC 11 lbs 021200-82589 62-3792-9830-0

3792 Clear 5/8" x 8" Q 11 lbs 021200-65263 62-3792-9132-1

3792B* Clear Pellets 22 lbs 021200-87960 62-3792-9335-0

3792B Clear Pellets 950 lbs 021200-49097 62-3792-9339-2

3794 Clear 2 lb Loaf 34 lbs 021200-43830 62-3794-6630-3

3796 Lt. Tan 1" x 3" PG 22 lbs 021200-25352 62-3761-9330-6

3796 Lt. Tan 5/8" x 2" TC 11 lbs 021200-25353 62-3731-9830-5

3797 Off-White 1" x 3" PG 22 lbs 021200-82592 62-3797-9330-0

3797 Off-White 5/8" x 2" TC 11 lbs 021200-82593 62-3797-9830-9

6111B Green Chips 22 lbs 021200-96590 62-6112-9335-8

6111B Tan Chips 22 lbs 021200-96589 62-6111-9335-0

6111HTB Tan Chips 22 lbs 021200-43779 62-6113-9335-6

6111HTB Tan Chips 850 lbs 021200-56567 62-6113-9339-8

6111HTB Blue Chips 22 lbs 021200-49935 62-6115-9335-1

6111HTB* Blue Chips 850 lbs 021200-56568 62-6115-9339-3

6116 Off-White Chips 22 lbs 021200-49924 62-6116-9335-9

3M™Scotch-Weld™Hot Melt Adhesives (continued)

Product UPC SN

LT 021200-82245 62-9281-9930-6

LT with Quadrack Converter and

Palm Trigger 021200-89447 62-9281-9950-4

Pneumatic PG II LT with Speedloader

and Cartridge Feed 021200-89395 62-9783-9630-7

Pneumatic PG II LT with Speedloader

and Magazine Feed 021200-89396 62-9783-9830-3

AE II LT 051115-25567 62-9799-9930-7

TC 021200-82244 62-9990-9935-1

TC with Quadrack Converter and 021200-89445 62-9990-9950-0

Palm Trigger

Pneumatic PG II with Speedloader and

Cartridge Feed includes bench stand

and tips 9921 and 9946 021200-22033 62-9938-9630-7

Pneumatic PG II Refurbished with

Speedloader and Cartridge Feed* 021200-64787 62-9949-9931-6

Pneumatic PG II with Speedloader and

Magazine Feed includes bench stand

and tips 9921 and 9946 021200-22034 62-9938-9830-3

Pneumatic PG II Refurbished with

Speedloader and Magazine Feed 021200-64788 62-9949-9932-4

AEII 021200-96594 62-9796-9930-3

EC 021200-89519 62-9680-9930-9

3M™Scotch-Weld™Hot Melt Applicators

Product Description UPC SN

9726 "T" Tip Assembly 021200-64542 62-9726-9930-0

9764 3/4" Slotted Spreader for

use w/3755LM adhesive 021200-83526 62-9764-9930-1

9777 1/4" Slotted Spreader for

use w/3755LM adhesive 021200-83732 62-9777-9930-3

9782 1/2" Slotted Spreader for

use w/3755LM adhesive 021200-83529 62-9782-9930-3

9727 "L" Tip with Adapter 021200-64543 62-9727-9930-8

9916 3 Hole Spreader 021200-21836 62-9916-9930-7

9913 2 Hole Spreader 021200-21830 62-9913-9930-4

9917 3 hole 1" Spreader 021200-21837 62-9917-9930-5

9729 High Viscosity Valve

(TC, EC, PG II) 021200-64840 62-9729-9930-4

9946 .072" Brass Extension

(PG II, PG II LT) 021200-22040 62-9946-6980-2

9785 .070" Tapered Aluminum

Extension (all applicators) 021200-82554 62-9785-9930-6

9725 .072" Mini Extension Tip 021200-21786 62-9725-9930-2

9922 .063" Fluted Tip 021200-21841 62-9922-0066-7

9940 .125" Fluted Tip 021200-22036 62-9940-6920-1

9921 .090" Fluted Tip 021200-21840 62-9921-0066-9

Heavy Duty Bench

Stand for use with

PG II & PG II LT – 021200-22039 62-9945-9930-6

Heavy Duty bench

Stand for use with

EC, TC, & LT – 021200-82418 62-9945-9935-5

Bench Mount 021200-82277 62-9276-9930-6

Bench Nozzle

Assembly – 021200-21713 62-9233-2781-1

Foot Pedal Assembly – 021200-82278 62-9277-9930-4

TC & LT Palm Trigger – 021200-82701 62-9761-9930-7

TC Quadrack

Converter – 021200-83536 62-9275-9935-7

3M™Scotch-Weld™Hot Melt Accessories

Bulk

Hot Melt Technology:

Applied

350°–385°F (177°–196°C)

44 45

Industrial Adhesives and Tapes Division

900 Bush Avenue, Building 21-1W-10

St. Paul, MN 55144-1000

www.3M.com/adhesives

3M, Fastbond, Scotch-Grip,

and Scotch-Weld are trademarks

of 3M Company.

Printed in U.S.A.

78-6900-2947-1

Limited Product Warranty: 3M warrants all 3M™ Scotch-Weld™ Hot Melt Applicators for 6 months from the date of manufacture, that the 3M product will be free of

defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty does not cover damage resulting from the use or inability to use the 3M product due to misuse,

workmanship in application, or application or storage not in accordance with 3M recommended procedures. Important Notice: User is responsible for determining whether

the 3M product is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a

3M product in a particular application. The materials to be bonded with the product, the surface preparation of these materials, the product selected for use, the conditions in

which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and

performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge

and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Limitation of Remedies and Liability: If the 3M product is proved to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY, AT 3M’S OPTION,

SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether

direct, indirect, special, incidental, or consequential,regardless of the legal theory asserted, including negligence, warranty, or strict liability.

3M™Scotch-Weld™Polyurethane

Reactive (PUR) Adhesive Systems

for structural adhesive benefits with

hot melt speed.

3M™Industrial Aerosol Adhesives

for a fistful of bonding power

with a wide variety of materials.

3M™Fastbond™

Water-based

Adhesives for

productivity,

performance,

profitability,

and compliance.

3M™Scotch-Weld™

Cylinder Spray

Adhesives for bulk

productivity with

aerosol convenience

and portability.

Other 3M™Adhesive Technologies

for improved design, productivity, and performance

3M™Scotch-Weld™

Structural Adhesives for

the permanent bonding

power of epoxies,

urethanes, acrylics,

and cyanoacrylates.

3M™Scotch-Grip™Rubber and

Plastic Adhesives for handy

tubes of bonding power.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

3M:

3764AE 3792-LM-PG 3792-Q 3792-AE 3792-TC 3792-LM-TC 3792-PPG