Wire to Board Connectors Dynamic Series Connectors/D-3000 Series D-3 Contact and Application Tooling Crimp Type [ a ae Receptacle Contact (Used on Receptacle Housing) Tab Contact (Used on Tab Housing) ; Contact Part Number Application Tooling Part Number Wire Range | Wire Wire "~ : R Receptacle Contact ns. ange: ne . . Tab Mini-Appli- Standard contact) High contact AWG mm | Diameter | Mark (Only-2 & -3 (pressure-2, -3,| Contact cator Hand Too! available) &-5 available) 28 0.08 qe- st.| 175194-0 4-175194- 175284-0 1276659-1 _ 08~-1.2 . 2012. ) S - ~ f 24 0201 10-14 LP.) 175216-0 1-175216-0 | 175287-D 91565-1 24 0,20 | 12~1.6_ st.| 175195-0 1-175195- 175285-0 937472-1 22090) 7 gf M - - 20 0.50 . LP. 1752t7-L 1-175217-D 175288-7 91559-1 20 0.50 | | 3 oe ST. 175196-0 1-175196-L 175286-0 1385001-2 18 085) 0 7 L - - 16 1.25 | 29-28 LP. 175218-0 1-175218-] 175289-L] _ 91558-1 16 1.25 99-28 OL ST. 917484-L 1-91 7484-1] 9$17485-L] 1276662-1 14 2,20 LP. 917511-L 1-917511-L] 917512-L] 91560-1 16 1.25 | 31~-3.3 | aL ST. 3537 15-L 1-353715-0 353716-J 937269-2 _. 14 2.20 | 3.3~3.4 LP, 353717- 1-353717-L) 353718-L 91561-1 Note : * Enter the following plating code in Part Number suffix-I7 : -2 = 0.38um thick gold plating -3 = 0.76um thick gold plating -5 = Tin plating + Solder-type Contact : We do net manufacture solder-type contacts for any specific application. BHand Tools The crimping section incorporates Straight Action construction for improved reliability as with automachine. %* Minimum order quantity is provided. When ordering, specify your requirements by multiplying the quantily. Minimum order quantity for tooling is one. *Mini-Appticators are for use with autormachines. For more information, contact our Sales Department.) * Strip Form contacts are for use with Mini-Applicators (automachines) and Loose-Piece contacts are for Hand tools. Part No.: See the Chart Minimum order guantiy:1 Uses For General Production Can it be used for tool repairing? Yes Approximately how many times of 50,000 crimping can be performed? 447