Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 49
CENC4 CENC16 CENC35
A quick reliable solution for
ground, neutral or low volt-
age distribution applica-
tions. The Busbar System
consists of a busbar, busbar
supports, and screw clamp
terminals for terminating
wires
NEB 10 (10 x 3 mm) and
NEB 6 (6 x 6 mm), tin plated
copper busbars are avail-
able in one meter lengths.
Both have a 140A current
carrying capacity.
NES plastic support with
fixing screws for holding 10
x 3 & 6 x 6 busbar makes
placing of busbar an easy
task. Busbars up to 200 mm
length should be supported
at ends by two busbar sup-
ports. For busbars exceed-
ing 200 mm length, it is rec-
ommended to provide inter-
mediate busbar support.
Easy to operate CENC
clamp secures wire to the
busbar.
Terminal Width
Height x Length
Stripping Length
Insulation Material
Type of Connection
Approvals
Wire Range
Current Rating*
Torque
Other Approvals
Terminal Block**
Busbar
(10 x 3 mm)
Busbar
(6 x 6 mm)
Plastic Support
with Fixing Screw
End Clamp/Bus bar
support for rail mounting
Marking Tags
(MT Type)
7.5 mm 9.8 mm 14.5 mm
30 x 23.3 mm 36 x 23.3 mm 45 x 27.3 mm
12 mm 16 mm 16 mm
Polyamide 6.6 Polyamide 6.6 Polyamide 6.6
1 screw clamp connection 1 screw clamp connection 1 screw clamp connection
22-10 AWG 0.5-6 sq.mm 22-12 AWG 10-4 AWG 6-16 sq.mm 10-6 AWG 8-2 AWG 10-35 sq.mm 8-2 AWG
35 A 41 A 80 A 76 A 125 A 125 A
14 lb-in 0.8 Nm 14 lb-in 14 lb-in 2.0 Nm 17.5 lb-in 25 lb-in 2.5 Nm 25 lb-in
Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk.
CENC4 50 CENC16 50 CENC35 50
NEB10 1 m NEB10 1 m NEB10 1 m
NEB6 1 m NEB6 1 m NEB6 1 m
NES 50 NES 50 NES 50
CA202 50 CA202 50 CA202 50
MT5 100 MT6 100 MT6 100
* 140A current carrying capacity of busbar should be taken
into account while connecting loads.
** Consult for other available colors.
E220514 E220514 E220514
Busbar System
