© 2019 Kingbright. All Rights Reserved. Spec No: DSAO0362 / 1203014712 Rev No: V.8B Date: 03/07/2019 Page 1 / 4
PACKAGE DIMENSIONS
SELECTION GUIDE
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
APFA2507QBDSEEZGKC
2.5 x 0.7 mm Right Angle SMD Chip LED Lamp
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
DESCRIPTIONS
zThe Blue source color devices are made with InGaN
Light Emitting Diode
zThe Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
zThe Green source color devices are made with InGaN
on Sapphire Light Emitting Diode
zElectrostatic discharge and power surge could
damage the LEDs
zIt is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
zAll devices, equipments and machineries must be
electrically grounded
FEATURES
z 2.5 x 1.0 x 0.7 mm right angle SMD LED, 0.7 mm
thickness
zLow power consumption
zWide viewing angle
zIdeal for backlight and indicator
z Package: 3000 pcs / reel
zMoisture sensitivity level: 3
z Tinned pads for improved solderability
zRoHS compliant
APPLICATIONS
zBacklight
zStatus indicator
zHome and smart appliances
zWearable and portable devices
zHealthcare applications
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Part Number Emitting Color
(Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1]
Min. Typ. 2θ1/2
APFA2507QBDSEEZGKC
■ Blue (InGaN)
Water Clear
40 65
■ Hyper Red
(AlGaInP)
80 110
■ Green (InGaN) 300 500
130°
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO0362 / 1203014712 Rev No: V.8B Date: 03/07/2019 Page 2 / 4
ABSOLUTE MAXIMUM RATINGS at TA=25°C
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
APFA2507QBDSEEZGKC
Symbol
Value
Unit
Blue Hyper Red Green
Wavelength at Peak Emission IF = 20mA (typ) λpeak 460 630 515 nm
Dominant Wavelength IF = 20mA (typ) λdom [1] 465 621 525 nm
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA (typ) Δλ 25 20 35 nm
Capacitance (typ) C 100 25 45 pF
Forward Voltage IF = 20mA (typ)
(max) VF [2] 3.3
4.0
2.0
2.5
3.3
4.1 V
Reverse Current (VR = 5V) (max) IR 50 10 50 µA
Temperature Coefficient of λpeak
IF = 20mA, -10°C ≤ T ≤ 85°C (typ) TCλpeak 0.04 0.13 0.05 nm/°C
Temperature Coefficient of λdom
IF = 20mA, -10°C ≤ T ≤ 85°C (typ) TCλdom 0.03 0.06 0.03 nm/°C
Temperature Coefficient of VF
IF = 20mA, -10°C ≤ T ≤ 85°C (typ) TCV -3.0 -1.9 -3.0 mV/°C
Parameter
Parameter Symbol Value
Unit
Blue Hyper Red Green
Power Dissipation PD 120 75 102.5 mW
Reverse Voltage VR 5 5 5 V
Junction Temperature Tj 115 115 115 °C
Operating Temperature Top -40 to +85 °C
Storage Temperature Tstg -40 to +85 °C
DC Forward Current IF 30 30 25 mA
Peak Forward Current IFM [1] 150 195 150 mA
Electrostatic Discharge Threshold (HBM) - 250 3000 450 V
Thermal Resistance (Junction / Ambient) Rth JA [2] 440 505 590 °C/W
Thermal Resistance (Junction / Solder point) Rth JS [2] 320 400 480 °C/W
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
Notes:
1. 1/10 Duty Cycle , 0.1ms Pulse Width .
2. Rth
JA, Rth
JS Results from mounting on PC board FR4 (pad size≥16 mm2 per pad).
3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO0362 / 1203014712 Rev No: V.8B Date: 03/07/2019 Page 3 / 4
0.5 0.50.0
-90°
-75°
-60°
-45°
-30°
-15°
75°
60°
45°
30°
0° 15°
90°
1.0 1.0
R
G
B
T
a
= 25 °C
APFA2507QBDSEEZGKC
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION
GREEN
0
10
20
30
40
50
2.0 2.5 3.0 3.5 4.0 4.5
Ta = 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
Ta = 25 °C
Forward current (mA)
Luminous intensity normalised at
20 mA
0
10
20
30
40
50
-40-20 0 20406080100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40-200 20406080100
Ambient temperature (°C)
Luminous intensity normalised at
Ta = 25 °C
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve Luminous Intensity vs.
Ambient Temperature
HYPER RED
0
10
20
30
40
50
1.5 1.7 1.9 2.1 2.3 2.5
T
a
= 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
T
a
= 25 °C
Forward current (mA)
Luminous intensity normalised at
20 mA
0
10
20
30
40
50
-40-20 0 20406080100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40-200 20406080100
Ambient temperature (°C)
Luminous intensity normalised at
T
a
= 25 °C
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve Luminous Intensity vs.
Ambient Temperature
BLUE
0
10
20
30
40
50
2.0 2.4 2.8 3.2 3.6 4.0
Ta = 25 °C
Forward voltage (V)
Forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
0 1020304050
Ta = 25 °C
Forward current (mA)
Luminous intensity normalised
at 20 mA
0
10
20
30
40
50
-40-20 0 20406080100
Ambient temperature (°C)
Permissible forward current (mA)
0.0
0.5
1.0
1.5
2.0
2.5
-40-20 0 20406080100
Ambient temperature (°C)
Luminous intensity normalised
at T a = 25 °C
Forward Current vs.
Forward Voltage
Luminous Intensity vs.
Forward Current
Forward Current Derating Curve Luminous Intensity vs.
Ambient Temperature
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650 700 750 800
T
a
= 25 °C
Blue Green Red
Wavelength (nm)
Relative Intensity (a. u.)
© 2019 Kingbright. All Rights Reserved. Spec No: DSAO0362 / 1203014712 Rev No: V.8B Date: 03/07/2019 Page 4 / 4
APFA2507QBDSEEZGKC
TAPE SPECIFICATIONS (units : mm)
REEL DIMENSION (units : mm)
PACKING & LABEL SPECIFICATIONS
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.
PRECAUTIONARY NOTES
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to
the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If
customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening
liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes
