ARIES ELECTRONICS INC SHE D MM 0923053 0001004 LTe A- L/- zi QQ | i - SS" 0. Box 120, Frenchtown, Ny osezs Press-Lok Stackable Connector Phone 1-908-996-6841 ELECTRONICS, INC. FAX 1-908-996-3891 Squarestix Female, Connector bt-O5 [3 Hermaphroditic Stackable Connectors Connectors are availabie in standard @ allow the stacking of 1/16 inch PCBs 20 and 40 pin dual row .100 (2,54) x .100 on .500 (12,70) or .600 (15,24) board (2,54) grid or 20 pins in a single row. centers. As many boards as desired may Other pin counts of 4 through 38 pin dual be stacked by soldering the solder tail row or 2 through 19 pin single row are version in the bottom mother board and available as non-returnable specials. then press fitting equivalent pin count These connectors are side-to-side units with the stackable style pin in the stackable (for end to end stacking, skip daughter boards. (Connectors with one pin position). stackable pins can plug into each other Prank ' or into the solder tail version in the ez) ( mother boar i 9a 190 oe 54) -200 0 (5,0 08) ik a nRAT tbr a2 WE Vr 340 q (3,04) (8,68) .040 1 a (1,01) | 17) Stackable Press Lok Pi F (908) 030 Fj (0,76) |! ee 63) i $3) a ~~ J .025 (0,63) K oARD 100 (2,54) -100 (2,54) "4" .030.(0,78) FOR .600 (15,24) Bi ca: 120 TOBOARD SPaciNG A = [Number of positions ron se0.1270)BoARD (3,04) x .100 (2,54)] + .050 (1,27). Solder Tail (915) PERFORMANCE CHARACTERISTICS P.C.B. Spacing: .500" and .600 P.C.B. Removal Force per Pin: 1 Ib. min. in Pin Material: Phosphor Bronze. Plated Thru-Hole Diameter (finished) should be Plating: 10u gold per MIL-G45204 over .040 + .003 (.043/.037) dia. plated thru-hole. 50 nickel per QQN-290. and/or 100; tin plating per MIL-T10727 over 50x nickel Stacking Sockets Pin Insertion Force per Pin: per QQN-290. Thicker gold . plating available; consult factory. Stacking Sockets Pin Withdrawal Force per Pin: Pin Spacing Matrix: .100 X .100" (dual row) Insulation Reistance: 1,000 megohms minimum. Bady: Glass reintorced thermoplastic Dielectric Withstanding Voltage: 600 VAC UL-94V0 flammability rating. minimum. P.C.8. Installing Force per Pin: 5 Ibs. max. in Contact Rating: 1 Amp. Plated Thru-Hole Diameter (finished) should be Normal Force: 100 grams min. -040 + .003 (.043/.037) dia. plated thru-hole. XX - KOXS - XX ; : an No. of Pins 2] [F L_ t= Gea PRESS-LOK i 5 = 500 Between Boards 2 = Gold in contact area and 6 = 600 Between Boards Timonoin tate Stackable Connector Series 905 = Stackable Press-Lok 1 = Single Row Straight, 1 through 20 Pins e Termination 2 = Dual Row Straight, 2 through 40 Pins 2 to 40 positions Series 915 = Solder Tail Termination .500 (12,70) and .600 (15,24) Series 925 = Short Press-Lok =to- 7 Termination Note: Standard sizes are 20 Pin Single Row and 20 & 40 Pin Dual Row board-to-board Spacings ; 440 220 Squarestix Female Connectors (accept (41,18) (5.59) aso -025 (0,64) square pins) solder into p.c. 400 (44,18) boards at a 90 angle. The receptacle (2,54) t + accepts Aries Squarestix connectors with t the appropriate number of pins or any product with .025 (0,64) square pins. A I= Squarestix connectors are available in J FIAT LELELLPLL ET E27 T LL TP standard sizes of 20 and 40 pins on a .020 L 80, dual row of .100 X .100 (2,54 x 2,54) (0,51) OD grid or 20 pins in a single row. Other (14,73) pin counts of 4 thru 38 pin dual row or 040 030 2 thru 19 pin single row are available | [*%1.02) 1 core) 420 - i (3,05) as non-returnable specials. A=Number of positions (178) Lae (it 7 . X 100 (2,54) + .050 (1,27) { (11,18) PERFORMANCE CHARACTERISTICS Pin Material: Phosphor Bronze Plating: 10, (0,254um) gold per MIL G-45204 over 020 qr 50 (1,27um) nickel per QQN-290. 100): (ost) (2,54 um) tin plating per MIL T10727 over 50u (1,27 um) nickel per QQN-290. Thicker HOW TO ORDER gold plating available; consult factory. xx ; Pin Spacing Matrix: .100 .100 (2,54 x 2,54) _. 5935 - (dual row) . 1 Body: Glass reinforced thermoplastic polyester 2 outer tine ] Tow Plating S eries 5 935 UL94VO flammability rating. UL = temperature index 130C. 2 through 40 pins dual row 1=Goid SQUARESTIX FEMALE Squarestix pin insertion (Standard sizes are single row 20, 2=Gold in contact area force per pin: 3 oz. (85,13 gm) max. dual row 20 and 40) and tin on pin tails Cc O N N E Cc TO R Squarestix pin withdrawal aa with ni . . force per pin: 1 02.(28,38 gm) min. 1= Single row 90 with pin to Single Row - 20 Pins Insulation resistance: 1,000 johms min. pores number board dimension of .070 i meg for Squarestix 2=Dual row 90 with pin to Double Rows - 40 Pins Dielectric withstanding voltage: 6G0VAC min. female connector Contact rating: 1 Amp board dimension of .070 Normal force: 100 grams min. Note: Standard sizes are 20 Pin Single Row and 20 & 40 Pin Dual Row 35