10-2J12.1065 - Single-LED 10-2J12.1065 - Single-LED Attention: The preview is based on a sample product. This can differ from your current configuration. Stand: 03.01.2021 Attribute Dom. Wavelength Illumination colour Lumi. Intensity 1 value Lumi. Intensity Operation current Operating voltage Operating Voltage/Current Socket Weight 525 nm Green 1050 mcd 1050 mcd 4 - 7 mA 15 % 24 V AC/DC +10% 24 V +10% 4 / 7 mA 15 % T1 3/4 MG 0.002 kg 10-2J12.1065 - Single-LED Wiring diagrams Stand: 03.01.2021 Powered by TCPDF (www.tcpdf.org) Additional information Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate) When using AC/DC types with AC operation, slight flickering can occur The luminous intensity stated is for when used with DC Electrical and optical data are measured at 25 C The specified versions are built with a protection diode (halve wave rectifier) in series and the LED Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used. Keep to the country specific safety instructions