TVS Diodes Transient Voltage Suppressor Diodes ESD0P2RF Series Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode ESD0P2RF-02LS ESD0P2RF-02LRH Data Sheet Revision 1.0, 2011-05-19 Final Industrial and Multi-Market Edition 2011-05-19 Published by Infineon Technologies AG 81726 Munich, Germany (c) 2011 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ESD0P2RF Series Revision History Page or Item Subjects (major changes since previous revision) Revision 1.0, 2011-05-19 Trademarks of Infineon Technologies AG AURIXTM, BlueMoonTM, C166TM, CanPAKTM, CIPOSTM, CIPURSETM, COMNEONTM, EconoPACKTM, CoolMOSTM, CoolSETTM, CORECONTROLTM, CROSSAVETM, DAVETM, EasyPIMTM, EconoBRIDGETM, EconoDUALTM, EconoPIMTM, EiceDRIVERTM, eupecTM, FCOSTM, HITFETTM, HybridPACKTM, IRFTM, ISOFACETM, IsoPACKTM, MIPAQTM, ModSTACKTM, my-dTM, NovalithICTM, OmniTuneTM, OptiMOSTM, ORIGATM, PRIMARIONTM, PrimePACKTM, PrimeSTACKTM, PRO-SILTM, PROFETTM, RASICTM, ReverSaveTM, SatRICTM, SIEGETTM, SINDRIONTM, SIPMOSTM, SMARTiTM, SmartLEWISTM, SOLID FLASHTM, TEMPFETTM, thinQ!TM, TRENCHSTOPTM, TriCoreTM, X-GOLDTM, X-PMUTM, XMMTM, XPOSYSTM. Other Trademarks Advance Design SystemTM (ADS) of Agilent Technologies, AMBATM, ARMTM, MULTI-ICETM, KEILTM, PRIMECELLTM, REALVIEWTM, THUMBTM, VisionTM of ARM Limited, UK. AUTOSARTM is licensed by AUTOSAR development partnership. BluetoothTM of Bluetooth SIG Inc. CAT-iqTM of DECT Forum. COLOSSUSTM, FirstGPSTM of Trimble Navigation Ltd. EMVTM of EMVCo, LLC (Visa Holdings Inc.). EPCOSTM of Epcos AG. FLEXGOTM of Microsoft Corporation. FlexRayTM is licensed by FlexRay Consortium. HYPERTERMINALTM of Hilgraeve Incorporated. IECTM of Commission Electrotechnique Internationale. IrDATM of Infrared Data Association Corporation. ISOTM of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLABTM of MathWorks, Inc. MAXIMTM of Maxim Integrated Products, Inc. MICROTECTM, NUCLEUSTM of Mentor Graphics Corporation. MifareTM of NXP. MIPITM of MIPI Alliance, Inc. MIPSTM of MIPS Technologies, Inc., USA. muRataTM of MURATA MANUFACTURING CO., MICROWAVE OFFICETM (MWO) of Applied Wave Research Inc., OmniVisionTM of OmniVision Technologies, Inc. OpenwaveTM Openwave Systems Inc. RED HATTM Red Hat, Inc. RFMDTM RF Micro Devices, Inc. SIRIUSTM of Sirius Satellite Radio Inc. SOLARISTM of Sun Microsystems, Inc. SPANSIONTM of Spansion LLC Ltd. SymbianTM of Symbian Software Limited. TAIYO YUDENTM of Taiyo Yuden Co. TEAKLITETM of CEVA, Inc. TEKTRONIXTM of Tektronix Inc. TOKOTM of TOKO KABUSHIKI KAISHA TA. UNIXTM of X/Open Company Limited. VERILOGTM, PALLADIUMTM of Cadence Design Systems, Inc. VLYNQTM of Texas Instruments Incorporated. VXWORKSTM, WIND RIVERTM of WIND RIVER SYSTEMS, INC. ZETEXTM of Diodes Zetex Limited. Last Trademarks Update 2010-10-26 Final Data Sheet 3 Revision 1.0, 2011-05-19 ESD0P2RF Series Table of Contents Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Predefined Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1 1.1 1.2 Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode . . . . . . . . . . . . . . . . . . . . 8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Application Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 3.1 3.2 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Electrical Characteristics at TA=25C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Typical Characteristics at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4 Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5 Ordering Information Scheme (Examples) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6 6.1 Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PG-TSLP-2-17 (mm) [5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 7 7.1 Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PG-TSSLP-2-1 (mm) [5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Final Data Sheet 4 Revision 1.0, 2011-05-19 ESD0P2RF Series List of Figures List of Figures Figure 2-1 Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-6 Figure 3-7 Figure 3-8 Figure 3-9 Figure 3-10 Figure 4-1 Figure 5-1 Figure 6-1 Figure 6-2 Figure 6-3 Figure 6-4 Figure 7-1 Figure 7-2 Figure 7-3 Figure 7-4 Pin Configuration and Schematic Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Definitions of electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Reverse current: IR = f(VR), TA = parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Line capacitance: CL = f(VR), f = 1 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Line capacitance: CL = f(f), VR = parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Line capacitance: CL = f(TA), VR = parameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 IEC61000-4-2 VCL = f(t), 8 kV positiv pulse from pin 1 to pin 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 IEC61000-4-2 VCL = f(t), 8 kV negativ pulse from pin 1 to pin 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 IEC61000-4-2 VCL = f(t), 15 kV positiv pulse from pin 1 to pin 2. . . . . . . . . . . . . . . . . . . . . . . . . . . 14 IEC61000-4-2 VCL = f(t), 15 kV negativ pulse from pin 1 to pin 2 . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Clamping voltage : ITLP = f(VTLP) [4]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Single line, bi-directional ESD / Transient protection [1], [2], [3] . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PG-TSLP-2-17: Package overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PG-TSLP-2-17: Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PG-TSLP-2-17: Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PG-TSLP-2-17: Marking (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 PG-TSSLP-2-1: Package overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PG-TSSLP-2-1: Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PG-TSSLP-2-1: Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PG-TSSLP-2-1: Marking (example) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Final Data Sheet 5 Revision 1.0, 2011-05-19 ESD0P2RF Series List of Tables List of Tables Table 2-1 Table 3-1 Table 3-2 Table 3-3 Table 3-4 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Maximum Ratings at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 DC Characteristics at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 RF Characteristics at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ESD Characteristics at TA = 25 C, unless otherwise specified . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Final Data Sheet 6 Revision 1.0, 2011-05-19 ESD0P2RF Series Predefined Names Predefined Names Name Initial Cross-Reference X-GOLD X-GOLD XMM XMM ----------------------------------------------------------------------------Definition of "Predefined Names" Frequently used expressions, such as component names, file names, tools releases, version numbers, proprietary variables and software links, can be used in a similar way as user variables. However, they must be listed in a special table and not in the standard file "Variables". Correct Usage Steps: 1. Insert all expressions into the left column of the above table. 2. Insert an initial Cross-Reference into the right column of the same row. The initial Cross-Reference is necessary to ensure that a single ID is used in all your documents using the "Predefined_Names.fm" file (Example: X-GOLD has the unique ID = CHDGHJGH). 3. Insert a Cross-Reference (Element "CrossReference") into your document to the Element Identifier of the "Predefined_Names.fm" file. Set the output format of the Cross-Reference to "Variable" (example: X-GOLD). Notes 1. All documents in a project (such as XMM) and within a book should use the same file "Predefined Names". This allows copying content between different documents. For this reason, local versions of "Predefined Names" must not be produced. 2. New definitions must be inserted in a new row. Never change existing definitions, as they might be used in other documents. 3. This file does not need to be included in your book, but it must be in the fm sub-folder of your document. 4. You can sort the above table with FrameMaker only if the initial cross-reference in the right column has been properly inserted. Otherwise, the table may only be sorted by hand, as the cross-references to your document would get lost. Final Data Sheet 7 Revision 1.0, 2011-05-19 ESD0P2RF Series Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode 1 Bi-directional Ultra-low Capacitance ESD / Transient Protection Diode 1.1 Features * * * * * * * ESD / transient protection of RF signal lines according to: - IEC61000-4-2 (ESD): 20 kV (contact) - IEC61000-4-4 (EFT): 40 A (5/50 ns) - IEC61000-4-5 (surge): 3 A (8/20 s) Maximum working voltage: VRWM 5.3 V Extremely low capacitance: CL = 0.2 pF (typical) Low clamping voltage: VCL = 29 V at IPP = 16 A (typical) Very low reverse current IR < 1 nA typ. Very small form factor down to 0.62 x 0.32 x 0.31 mm3 Pb-free (RoHS compliant) and halogen free package 1.2 * * Application Examples ESD protection of sensitive RF signal lines, Bluetooth Class 2, Automated Meter Reading RF antenna protection, frontend module, GPS, mobile TV, FM radio, UWB 2 Product Description Pin 1 Pin 2 Pin 1 marking (lasered) Pin 1 TSLP-2 Pin 1 Pin 2 Pin 2 TSSLP-2 a) Pin configuration b) Schematic diagram P G-TS (S)LP -2_Dual_Diode_S erie_P inConf_and_S c hematic Diag. v s d Figure 2-1 Pin Configuration and Schematic Diagram Table 2-1 Ordering Information Type Package Configuration Marking code ESD0P2RF-02LS PG-TSLP-2-1 1 line, bi-directional T ESD0P2RF-02LRH PG-TSSLP-2-17 1 line, bi-directional T Final Data Sheet 8 Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics 3 Characteristics Table 3-1 Maximum Ratings at TA = 25 C, unless otherwise specified Parameter Symbol Values Unit Min. Typ. Max. VESD - - 20 kV IPP - - 3 A Operating temperature range TOP -55 - 125 C Storage temperature 1) VESD according to IEC61000-4-2 2) IPP according to IEC61000-4-5 Tstg -65 - 150 C ESD contact discharge 1) Peak pulse current (tp = 8/20 s) 2) Electrical Characteristics at TA=25C, unless otherwise specified 3.1 RDYN Dynamic resistance VBR Breakdown voltage I VRWM Reverse working voltage maximum VCL Clamping voltage IPP Peak pulse current IPP RDYN I BR VCL VBR I RWM VRWM VRWM I RWM VBR VCL V IBR RDYN IPP Diode_Charac teris tic _Curve_B -i direc tional .vs d Figure 3-1 Definitions of electrical characteristics Table 3-2 DC Characteristics at TA = 25 C, unless otherwise specified Parameter Symbol Values Unit Min. Typ. Max. Reverse working voltage VRWM -5.3 - 5.3 V Breakdown voltage 7 - - V VBR Note / Test Condition IR = 1 mA, from pin 1 to pin 2, from pin 2 to pin 1 Reverse current Final Data Sheet IR - <1 50 9 nA VR = 5.3 V Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics Table 3-3 RF Characteristics at TA = 25 C, unless otherwise specified Parameter Symbol Diode capacitance Table 3-4 CL Values Unit Note / Test Condition Min. Typ. Max. - 0.23 0.4 pF VR = 0 V, f = 1 MHz - 0.2 0.4 pF VR = 0 V, f = 1 GHz Unit Note / Test Condition ESD Characteristics at TA = 25 C, unless otherwise specified Parameter Symbol 1) Clamping voltage Dynamic resistance Series inductance Min. Typ. Max. - 29 - V Ipp = 16 A - 38 - V Ipp = 30 A RDYN - 1 - LS - 0.2 - nH VCL 1) Values ESD0P2RF-02LS - 0.4 - nH ESD0P2RF-02LRH 1)Please refer to Application Note AN210 [4]. TLP parameter: Z0 = 50 , tp = 100ns, tr = 300ps, averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using least squares fit of TLP charactertistics between IPP1 = 10 A and IPP2 = 40 A. Final Data Sheet 10 Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics Typical Characteristics at TA = 25 C, unless otherwise specified 10 -7 10 -8 +125C 10-9 IR [A] 3.2 10 -10 10 -11 10-12 +85C +25C 0 1 2 3 VR [V] 4 5 6 5 6 Figure 3-2 Reverse current: IR = f(VR), TA = parameter 0.4 CL [pF] 0.3 0.2 0.1 0 0 1 2 3 VR [V] 4 Figure 3-3 Line capacitance: CL = f(VR), f = 1 MHz Final Data Sheet 11 Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics 0.26 0.25 5.3V CL [pF] 0.24 3.3V 0.23 0V 0.22 0.21 0.2 0 500 1000 1500 2000 2500 3000 f [MHz] Figure 3-4 Line capacitance: CL = f(f), VR = parameter 1 0.9 0.8 CL [pF] 0.7 0.6 5.3V 0.5 0.4 3.3V 0.3 0V 0.2 0.1 0 -50 -25 0 25 50 TA [C] 75 100 125 Figure 3-5 Line capacitance: CL = f(TA), VR = parameter Final Data Sheet 12 Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics 120 100 VCL-max-peak = 112 [V] VCL [V] 80 VCL-30ns-peak = 24.8 [V] 60 40 20 0 -20 -100 0 100 200 300 400 500 tp [ns] 600 700 800 900 700 800 900 Figure 3-6 IEC61000-4-2 VCL = f(t), 8 kV positiv pulse from pin 1 to pin 2 20 0 VCL [V] -20 -40 -60 VCL-max-peak = -116 [V] -80 VCL-30ns-peak = -25.0 [V] -100 -120 -100 0 100 200 300 400 500 tp [ns] 600 Figure 3-7 IEC61000-4-2 VCL = f(t), 8 kV negativ pulse from pin 1 to pin 2 Final Data Sheet 13 Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics 180 160 140 VCL [V] 120 100 VCL-max-peak = 162 [V] 80 VCL-30ns-peak = 37.4 [V] 60 40 20 0 -20 -100 0 100 200 300 400 500 tp [ns] 600 700 800 900 700 800 900 Figure 3-8 IEC61000-4-2 VCL = f(t), 15 kV positiv pulse from pin 1 to pin 2 20 0 -20 VCL [V] -40 -60 VCL-max-peak = -169 [V] -80 VCL-30ns-peak = -37.6 [V] -100 -120 -140 -160 -180 -100 0 100 200 300 400 500 tp [ns] 600 Figure 3-9 IEC61000-4-2 VCL = f(t), 15 kV negativ pulse from pin 1 to pin 2 Final Data Sheet 14 Revision 1.0, 2011-05-19 ESD0P2RF Series Characteristics 20 ESD0P2RF-02xx RDYN ITLP [A] 30 15 RDYN=1.0 20 10 10 5 0 0 5 10 15 20 25 30 35 40 45 50 55 60 VTLP [V] Equivalent VIEC [kV] 40 0 Figure 3-10 Clamping voltage : ITLP = f(VTLP) [4] Final Data Sheet 15 Revision 1.0, 2011-05-19 ESD0P2RF Series Application Information Application Information Connector 4 Protected signal line ESD I/O sensitive device 1 2 The protection diode should be placed very close to the location where the ESD or other transients can occur to keep loops and inductances as small as possible . Pin 2 (or pin 1) should be connected directly to a ground plane on the board . A pplic ation_E S D0P 2RF -02x x .v s d Figure 4-1 Single line, bi-directional ESD / Transient protection [1], [2], [3] Final Data Sheet 16 Revision 1.0, 2011-05-19 ESD0P2RF Series Ordering Information Scheme (Examples) 5 ESD Ordering Information Scheme (Examples) 0P1 RF - XX YY Package XX = Pin number (i.e.: 02 = 2 pins; 03 = 3 pins) YY = Package family: LS = TSSLP LRH = TSLP For Radio Frequency Applications Line Capacitance CL in pF: (i.e.: 0P1 = 0.1pF) ESD 5V3 U n U - XX YY Package or Application XX = Pin number (i.e.: 02 = 2 pins; 03 = 3 pins) YY = Package family: LS = TSSLP LRH = TSLP S = SOT363 U = SC74 XX = Application family: LC = Low Clamp HDMI Uni- / Bi-directional or Rail to Rail protection Number of protected lines (i.e.: 1 = 1 line; 4 = 4 lines) Capacitance: Standard (>10pF), Low (<10pF), Ultra-low (<1pF) Maximum working voltage VRWM in V: (i.e.: 5V3 = 5.3V) Figure 5-1 Ordering information scheme Final Data Sheet 17 Revision 1.0, 2011-05-19 ESD0P2RF Series Package Information 6 Package Information 6.1 PG-TSLP-2-17 (mm) [5] Top view Bottom view 0.39 +0.01 -0.03 0.6 0.05 0.05 MAX. 10.05 0.65 0.05 2 0.25 0.035 1) 1 0.5 0.035 1) Cathode marking 1) Dimension applies to plated terminal TSLP 2 7 PO V02 0.45 Copper Solder mask 0.375 0.35 0.275 1 0.925 0.3 0.35 0.6 0.275 Figure 6-1 PG-TSLP-2-17: Package overview Stencil apertures TSLP-2-7-FP V01 Figure 6-2 PG-TSLP-2-17: Footprint 0.5 1.16 Orientation marking 8 4 0.76 TSLP-2-7-TP V03 Figure 6-3 PG-TSLP-2-17: Packing Figure 6-4 PG-TSLP-2-17: Marking (example) Final Data Sheet 18 Revision 1.0, 2011-05-19 ESD0P2RF Series Package Information 7 Package Information 7.1 PG-TSSLP-2-1 (mm) [5] Top view Bottom view 0.31 +0.01 -0.02 0.62 0.035 2 1 0.2 0.025 1) 0.355 0.025 0.32 0.035 0.26 0.025 1) Cathode marking 1) Dimension applies to plated terminal TSSLP-2-1,-2-PO V05 Figure 7-1 PG-TSSLP-2-1: Package overview 0.19 0.24 Solder mask 0.19 0.57 0.14 0.62 Copper 0.19 0.27 0.24 0.32 Stencil apertures TSSLP-2-1,-2-FP V02 Figure 7-2 PG-TSSLP-2-1: Footprint 0.35 8 Ey 4 Cathode marking Ex Figure 7-3 PG-TSSLP-2-1: Packing Figure 7-4 PG-TSSLP-2-1: Marking (example) Final Data Sheet 19 Revision 1.0, 2011-05-19 ESD0P2RF Series References References [1] Infineon AG - Application Note AN167: ESD Protection for Broadband LNA BGA728L7 for Portable and Mobile TV Applications [2] Infineon AG - Application Note AN178: ESD Protection for RF Antennas using Infineon ESD0P4RFL and ESD0P2RF-xx [3] Infineon AG - Application Note AN200: Low Cost FM Radio LNA using BFR340F for Mobile Phone Applications [4] Infineon AG - Application Note AN210: Effective ESD Protection Design at System Level using VF-TLP Characterization Methodology [5] Infineon AG - Recommendations for PCB Assembly of Infineon TSLP and TSSLP Packages Final Data Sheet 20 Revision 1.0, 2011-05-19 ESD0P2RF Series Terminology Terminology CL Line capacitance EFT Electrical Fast Transient ESD Electrostatic Discharge GPS Global Positioning System IEC International Electrotechnical Commission IPP Peak pulse current IR Reverse current LNA Low Noise Amplifier RDYN Dynamic resistance RoHS Restriction of Hazardous Substances Directive TA Ambient temperature TLP Transmission Line Pulse TOP Operation temperature tp Pulse duration tr Pulse rise time Tstg Storage temperature UWB Ultra Wideband VBR Breakdown voltage VCL Reverse clamping voltage VESD Electrostatic discharge voltage VR Reverse voltage VRWM Maximum Reverse Working Voltage Final Data Sheet 21 Revision 1.0, 2011-05-19 w w w . i n f i n e o n . c o m Published by Infineon Technologies AG