Technical Support: (888) 41- A STEC or (407) 241-2752
Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662
102
Special Features
Electrical Specs
110 Watts
LPQ110 Series
Input
Input range 85-264 VAC
120-300 VDC
Frequency 47-440 Hz
Inrush current <18 A peak @ 115 VAC;
<36 A peak @ 230 VAC,
cold start @ 25°C
Input current 2.5 A max. (RMS) @ 115 VAC
Efficiency 70% t ypical at full load
EMI filter FCC Class B conducted
CISPR 22 Class B conducted
EN55022 Class B conducted
VDE 0878 PT3 Class B conducted
Safet y ground
leakage current <0.5 mA @ 50/60 Hz, 264 VAC input
Output
Maximum power 80 W for convection;
110 W with 30 CFM forced air
Adjustment range ±5% min. on main; 5-25 V on 4th
output on LPQ112 and LPQ113
Cross regulation ±2% on output 1; ±3% on outputs
2, 3 & 4
Hold-up time 20 ms @ 80 W load, 115 VAC
nominal line
Overload protection Shor t circuit protection on all
outputs. Case overload protected @
110-145% above peak rating
Over voltage protection 5.7-6.7 VDC on main output.
Latching type, recycle AC to reset.
Logic Control
Power Failure TTL logic signal goes high 50-150
msec after 5 V output. It goes low at
lea st 4 msec be fore loss of regulation.
Remote sense Compensates for 0.5 V lead drop
min. Will operate without remote
sense connected. Reverse
connection protected.
Operating temperature: 0° to 50°C ambient
derate each output at 2.5% per degree from 50°
to 70°C
Electromagnetic susceptibilit y: Designed to
meet IEC 801, -2, -3, -4, -5, -6, Level 3
Humidit y: Operating; non-condensing
5% to 95%
Vibration: Three orthogonal axes, sweep at
1 oct/min, 5 min. dwell at four major resonances
0.75 G peak 5 Hz to 500 Hz, operational
Storage temperature: -40° to 85°C
Temperature coefficient: ±.04% per °C
MTBF demonstrated: >550,000 hours at full load
and 25°C ambient conditions
• Universal input
• High efficiency
• Remote sense on main output
• Built-in EMI filter
• Low output ripple
• Adjustable 5 V output
• Over voltage protection
• Overload protection
• Adjustable floating 4th output
(On LPQ112 and LPQ113)
•Power fail
• Optional L bracket (-B suffix)
• Cover kit available LPX110-C
Environmental
VDE 0805/EN60950 (IEC950) 11774-3336-1245 (LC #84997)
UL UL1950 E132002
CSA CSA 22.2-234 Level 3 LR53982C
NEMKO EN 60950/EMKO-TUE P94102464
(74-sec) 203
CB Certificate and report 1423, 1424, 1425
CE Mark (LVD)
Electrical Specs
Total Power: 80-110 Watts
Input Voltage: 85-264 VAC
120-300 VDC
# of Outputs: Quad
rev 12.10.03
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
103
www.astecpower.com
Ordering Information
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Model Output Minimum Maximum Load with Maximum Load with Peak Regulation2 Ripple
Num ber Voltage Load Convection Cooling 30 CFM Forced Air Load1 P/P (PARD)3
LPQ112 5 V 2 A 9 A 11 A 15 A ±2% 50 mV
12 V 0 A 4.5 A 5 A 9 A ±3% 120 mV
-12 V 0 A 0.7 A 1.0 A 1.5 A ±5% 120 mV
±5-25 V 0 A 2.5 A 3 A 3.5 A ±3% 240 mV, max.
LPQ113 5 V 2 A 9 A 11 A 15 A ±2% 50 mV
15 V 0 A 4.5 A 5 A 9 A ±3% 150 mV
-15 V 0 A 0.7 A 1.0 A 1.5 A ±5% 150 mV
±5-25 V 0 A 2.5 A 3 A 3.5 A ±3% 240 mV, max.
LPQ114 5 V 2A 9 A 11 A 15 A ±2% 50 mV
12 V 0 A 4.5 A 5 A 9 A ±3% 120 mV
-12 V 0 A 0.7 A 1.0 A 1.5 A ±5% 120 mV
24 V 0.5 A 3.5 A 4.5 A 5 A +10 / -5% 240 mV
1. Peak current lasting <30 seconds with a maximum 10% dut y c ycle.
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to -peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. 4th O/P adjustable 5 to 25 V, factor y set at 5 V.
5. Minimum loads are required.
Note: -B suffix added to model number indicates L bracket option.
4.0"
(101.6)
3.5"
(88.9)
0.25"
(6.35)
0.25"
(6.35)
6.5"
(165.1) 7.0"
(177.8)
1.80"
(45.7)
0.12"
(3)
SK 1
SK 2
1
2
3
4
5
6
7
8
9
10
11
12
0.156" (4)
DIA (4 places)
1
3N
L
GND
4th O/P ADJ
SK 202
(POK)
1 2
SK 201
(+S) 1
(-S) 2
5V O/P ADJ
M1
M2
Connector LPQ112 LPQ113 LPQ114
SK1-1 GND GND GND
SK1-3 Neutral Neutral Neutral
SK1-5 Line Line Line
SK2-1 +5 V +5 V +5 V
SK2-2 +5 V +5 V +5 V
SK2-3 +5 V +5 V +5 V
SK2-4 Common Common Common
SK2-5 Common Common Common
SK2-6 Common Common Common
SK2-7 Common Common Common
SK2-8 +12 V +15 V +12 V
SK2-9 +12 V +15 V +12 V
SK2-10 -12 V -15 V -12 V
SK2-11 +5-25 V +5-25 V +24 V
SK2-12 -5-25 V -5-25 V Common
SK201-1 +sense +sense +sense
SK201-2 -sense -sense -sense
SK202-1 POK POK POK
SK202-2 GND GND GND
Mating Connectors
AC Input: Molex 09-50-8051 (USA)
09-91-0500 (UK)
PINS: 08-58-0111
DC Outputs: Molex 09-50-8121 (USA)
09-91-1200 (UK)
PINS: 08-58-0111
Remote sense/Power fail:
Molex 22-01-1022 (USA)
22-01-1023 (UK)
PINS: 08-50-0114
Astec Connector Kit #70-841-008, includes all of the above.
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ± 0.02”
3. Specifications are for convection rating at factor y settings unless other wise stated.
4. Mounting holes M1 and M2 should be grounded for EMI purposes.
5. Mounting hole M1 is safety ground connection.
6. L bracket mounting (6-32) maximum insertion depth is .20” (5).
7. Warranty: 1 year
8. Weight: 1.25 lb./0.57 kg
Pin Assignments
LPQ110 Series
4.28"
(108.6)
2.5"
(63.5)
6.4"
(162.6) 7.3"
(185.5)
2.2"
(56)
5.9"
(150.0)
0.86"
(21.8)
#6-32 PEM
6 places
-B Bracket
