Gap Pad 1500 (R) Thermally Conductive, Un-Reinforced Gap Filling Material Features and Benefits TYPICAL PROPERTIES OF GAP PAD 1500 PROPERTY Color * Thermal conductivity: 1.5 W/m-K * Un-reinforced construction for additional compliancy * Conformable, low hardness * Electrically isolating IMPERIAL VALUE Black -- -- -- Thickness (inch) / (mm) 0.020 to 0.200 0.508 to 5.080 ASTM D374 2 2 -- Density (Bulk Rubber) (g/cc) 2.1 2.1 ASTM D792 Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269 Hardness (Bulk Rubber) (Shore 00) (1) 40 40 ASTM D2240 Young's Modulus (psi) / (kPa) (2) 45 310 ASTM D575 Continuous Use Temp (F) / (C) -76 to 392 -60 to 200 -- ELECTRICAL Dielectric Breakdown Voltage (Vac) Note: Resultant thickness is defined as the final gap thickness of the application. >6000 >6000 ASTM D149 Dielectric Constant (1000 Hz) 5.5 5.5 ASTM D150 Volume Resistivity (Ohm-meter) 1011 1011 ASTM D257 Flame Rating V-O V-O U.L. 94 THERMAL Thermal Conductivity (W/m-K) 1.5 1.5 ASTM D5470 THERMAL PERFORMANCE vs. STRAIN Deflection (% strain) Thermal Impedance (C-in2/W) 0.040" (3) 10 1.62 20 1.50 30 1.33 1) Thir ty second delay value Shore 00 hardness scale. 2)Young's Modulus, calculated using 0.01 in/min. step rate of strain with a sample size of 0.79 inch 2. 3) The ASTM D5470 test fixture was used. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. Typical Applications Include: * Telecommunications * Computer and peripherals * Power conversion * RDRAMTM memory modules / chip scale packages * Areas where heat needs to be transferred to a frame chassis or other type of heat spreader Thickness vs. Thermal Resistance Gap Pad 1500 Resultant Thickness (mils) TEST METHOD Visual Reinforcement Carrier Inherent Surface Tack (1 sided) Gap Pad 1500 has an ideal filler blend that gives it a low-modulus characteristic that maintains optimal thermal performance yet still allows for easy handling.The natural tack on both sides of the material allows for good compliance to adjacent surfaces of components, minimizing interfacial resistance. METRIC VALUE Black 200 150 100 50 Configurations Available: 0 0 1 2 3 4 5 Thermal Resistance (C-in2/W) 6 * Sheet form and die-cut parts Building a Part Number - 0816 - NA Section E - 02 Section D 0.100 Section C - Section B Section A GP1500 Standard Options NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. 0816 = Standard sheet size 8" x 16", or 00 = custom configuration 02 = Natural tack, both sides Standard thicknesses available: 0.020", 0.040", 0.060", 0.080", 0.100", 0.125", 0.160", 0.200" GP1500 = Gap Pad 1500 Material Note: To build a part number, visit our website at www.bergquistcompany.com. www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company Asia Headquarters Hong Kong Phone: 852-2690-9296 Fax: 852-2690-2344 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_GP_1500_0711 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: GP1500-0.200-02-0816