DESIGNED & DIMENSIONED IN MILLIMETERS (INCHES FOR REFERENCE ONLY) REVISION A HSEC8-1XX-XX-X-RA-X-XX "A" REF DO NOT SCALE FROM THIS PRINT "B" REF C2 02 "D" 0.8000.051 .0315.0020 (TOL NON ACCUM) "A" CL C2-B-MV PLATING SPECIFICATION -L: SELECTIVE, .000010 GOLD ON POST, TIN ON TAIL A -S: SELECTIVE, .000030 GOLD ON POST, TIN ON TAIL 60 1.75 .069 REF POSITION #1 INDICATOR 3.100.03 .122.001 0.25 .010 REF C3 C3-A-MV "E" "A" 2 MAX SWAY (TYP) 59 ROW SPECIFICATION -RA: RIGHT ANGLE (USE HSEC8-1XXX-XX-RA-X) (* = NOT TOOLED) 5.20 .205 REF 01 OPTION -BL: BOARD LOCK OPTION (USE HSEC8-XXX-01-RA-XX-BL) (SEE SHEET 3, FIG.3) A (ONLY AVAILABLE IN 40, 50 & 60 POS) CARD THICKNESS -01: 1.57mm [.062] THICK CARD "C" C1-B-MV C1 2.70 .106 REF PACKAGING -TR: TAPE & REEL (-10 THRU -60 POS ONLY) No OF POSITIONS -10, -20, & -30 (SEE FIG. 1) -40, -50, -60, & *-100 TOOL NOT UP(SEE FIG. 2) (PER ROW) 3.00 .118 REF WT-51-XX-X 12.05 .474 REF 5.95 .234 REF 1.00 .039 REF A HSEC8-XXX-01-RA 9.30 .366 REF 3.05 .120 REF C7 C7-B-MV 0.550.10 .022.004 C-272-02-X 1.10 .043 REF 'B' 0.50 .020 REF C10 C10-A-MV C-272-01-X 7.000.08 .276.003 1.32 .052 REF HSEC8-SPACER-XXX-XX A C6 C8 C13 C5-B-MV "D" 0.050 C4 C4-B-MV C8-F-OP SEE TABLE 1 C6-B-MV C5 1.25 .049 REF SECTION "A"-"A" 1.32 .052 REF "F" 0.8000.051 .0315.0020 (TOL NON ACCUM) C9 C13-A-MV C11 0.90 .035 C9-A-MV 1.54 .061 C11-A-MV 1.25 .049 C12 C12-A-MV 1.85 .073 DETAIL 'B' SCALE 7 : 1 CL NOTES: C A FIG. 1 FOR POSITIONS -10, -20 & -30 (SHOWN: HSEC8-130-01-X-RA) 1. REPRESENTS A CRITICAL DIMENSION. 2. BURR ALLOWANCE: 0.038[.0015] MAX. 3. MINIMUM RETENTION FORCE: .5 LB FOR PINS AND WELD TAB. 4. MEASURE AT BENDS. 5. ALL DIMENSIONS SYMMETRIC ABOUT CL EXCEPT AS SHOWN. 6. PARTS TO BE PACKAGED IN TRAY, UNLESS -TR OPTION IS SPECIFIED. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. TOLERANCES ARE: DECIMALS ANGLES X.X: 0.3 [.01] 2 X.XX: 0.13 [.005] X.XXX: 0.051 [.0020] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: LCP, COLOR: BLACK CONTACT: BeCu WELD TAB: BRASS F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-X-XX-MKT.SLDDRW SHEET SCALE: 1:0.4 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8MM HIGH SPEED ASSEMBLY DWG. NO. HSEC8-1XX-XX-X-RA-X-XX BY: ROY LUO 11/05/2008 SHEET 1 OF 5 REVISION A "A" REF "B" REF "C' REF C14 02 C14-B-MV 2.70 .106 REF "D" 120 'C' C16 C15 C15-B-MV C16-B-MV 4.00 .157 "K" REF "H" SPACES @ 0.800[.0315] = "J" 01 119 (* = NOT TOOLED) "G" REF 2.00 .079 REF C17 C17-A-MV C18 "E" C18-A-MV 3.100.03 .122.001 "F" REF (* = NOT TOOLED) FIG. 2 FOR POSITIONS -40, -50, -60, -100 (SAME AS FIG. 1, UNLESS OTHERWISE STATED) (SHOWN: HSEC8-160-01-XX-RA) CL PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. 2.00 .079 REF 2.00 .079 REF 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DETAIL 'C' SCALE 5 : 1 F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-X-XX-MKT.SLDDRW DO NOT SCALE DRAWING 0.8MM HIGH SPEED ASSEMBLY DWG. NO. SHEET SCALE: 1:0.4 HSEC8-1XX-XX-X-RA-X-XX BY: ROY LUO 11/05/2008 SHEET 2 OF 5 REVISION A LTC-18 A HSEC8-XXX-01-RA-BL LTC-19 15.65 .616 REF 2.05 .081 6.05 .238 REF C19 C19-A-MV 5.580.03 .219.001 SECTION "F"-"F" "A" "F" "F" "E" "F" FIG. 3 -BL: BOARD LOCK OPTION (SAME AS FIG.2, UNLESS OTHERWISE STATED) (SHOWN: HSEC8-160-01-XX-RA-BL) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-X-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DWG. NO. 0.8MM HIGH SPEED ASSEMBLY HSEC8-1XX-XX-X-RA-X-XX BY: ROY LUO 11/05/2008 SHEET 3 OF 5 REVISION A C25 3.05 .120 C25-A-MV 0.280.05 .011.002 IN-PROCESS 2 (FILL BOTTOM ROW) C-272-01-X C21 C21-B-CP +0 90 - 3 C26 C26-A-MV C20 0.250.03 .010.001 (SEE NOTE 5) C20-B-CP 1.11 .044 C22 C22-B-CP R0.30 .012 (TYP) 1.780.03 .070.001 (SEE NOTE 5) REMOVE CARRIER IN-PROCESS 3 (CUT OFF OF CARRIER) 9.72 .383 (REF) C23 C24 C23-B-CP +3 90 - 0 C24-B-CP 0.90 .035 8.70 .343 C27 C13 C13-A-MV C27-A-MV IN-PROCESS 1 (FORM CONTACT C-272-01-X) A HSEC8-SPACER-XXX-XX IN-PROCESS 4 (FILL HSEC8-RA-XXX-XX) 9.65 .380 C28 0.75 .030 REF C28-A-MV PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DWG. NO. SHEET SCALE: 1:0.4 F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-X-XX-MKT.SLDDRW 0.8MM HIGH SPEED ASSEMBLY HSEC8-1XX-XX-X-RA-X-XX BY: ROY LUO 11/05/2008 SHEET 4 OF 5 REVISION A 9.83 .387 (SEE NOTE 5) C29 C29-B-CP 4.220.03 .166.001 IN-PROCESS 6 (FILL TOP ROW) C31 C7 C31-B-CP C7-B-MV 0.550.10 .022.004 C30 C30-B-CP +0 90 - 3 HEAT STAKE TOP ROW TAILS IN-PROCESS 7 (HEAT STAKE TOP ROW CONTACTS) 2.79 .110 R0.30 .012 (TYP) C32 5.26 .207 (REF) C32-B-CP +3 90 - 0 C34 C34-B-CP C33 C33-B-CP 10.020.10 .394.004 IN-PROCESS 5 (FORM CONTACT C-272-02-X) REMOVE CARRIER IN-PROCESS 8 (CUT OFF CARRIER) C8 C8-F-OP SEE TABLE 1 C13 C35 C35-B-MV C13-A-MV 0.90 .035 10.55 .415 WT-51-XX-X IN-PROCESS 9 (FILL WT-51-XX-X) A C9 C9-A-MV 1.54 .061 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. C10 7.000.05 .276.002 DO NOT SCALE DRAWING C10-A-MV SHEET SCALE: 2:1 F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-X-XX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: 0.8MM HIGH SPEED ASSEMBLY DWG. NO. HSEC8-1XX-XX-X-RA-X-XX BY: ROY LUO 11/05/2008 SHEET 5 OF 5