SPECIFICATION Supplier : Samsung electro-mechanics Part Number : CL32B475KAUYFNE Product : Multi-layer Ceramic Capacitor Description : CAP, 4.7, 25V, 10%, X7R, 1210 A. Samsung Part Number Series Size Dielectric Capacitance Capacitance CL 32 B 475 K A U Y F N E Samsung Multi-layer Ceramic Capacitor 1210 (inch code) L: 3.2 0.3 4.7 10 % tolerance 25 V Thickness 1.8 0.2 mm 2.5 0.2 W: Thickness division Inner electrode X7R Rated Voltage mm mm Low profile Ni Termination Cu/Ag-Epoxy Plating Sn 100% (Pb Free) Product Product for POWER application Special Reserved for future use Packaging Embossed Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 500Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characterisitcs Adhesive Strength (From -55 to 125, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.025 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Resistance Capacitance change : Tan : IR : Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) within 12.5% With rated voltage 0.05 max 402, 90~95%RH, 500+12/-0hrs 25* or Over High Temperature Capacitance change : Resistance Tan : IR : Test condition within 12.5% With 200% 0.05 max of the rated voltage Max. operating temperature 50* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.