Design and Specications are subject to change without notice. Ask the factory for technical specications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1740 Rev. 1.0
WIRELESS
MODULES
Panasonic Industrial Devices Europe GmbH
Hardware Status:
Engineering Samples
Embedded Bluetooth
Low Energy & NFC Combo
Module PAN1761
Design and Specications are subject to change without notice. Ask the factory for technical specications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation. PAN1761 Flyer v1.11
The PAN1761 supports both Bluetooth Low Energy (LE) 4.1 and
NFC – NFC Forum Type 3 compliant tag – based on leading edge
Toshiba SOC. The unique conguraon of the PAN1761 allows
NFC to wake up BLE from standby using an NFC eld and auto-
macally iniate a Bluetooth connecon. Highly secure
Bluetooth connecons are created using NFC to exchange link
keys. Bluetooth LE applicaons with extended baery life are
possible as a result of zero power consumpon in standby
mode. A remote device may independently create a wake up
signal with neither host control nor local baery consumpon.
Embedded microcontroller access and 32KB EEPROM is
available for autonomous stand-alone operaon.
General Features
- Same form factor and footprint as PAN1026 and PAN1760
- Integrated 2.4GHz Antenna, NFC Antenna external (Antenna Pin)
- Compliant with NFC Forum Tag Type 3 for easy pairing inializaon and
transfer of small amounts of data (ISO/IEC18092)
- Bluetooth 4.1 (LE) embedded GATT prole with high level API
commands, compable to Toshiba reference BLE proles
- Small 15.6 x 8.7 x 1.8 mm³ SMD package
- Operaon as host-less, stand alone with 32KB available for applicaons
- Standard SIG BLE and “SPP over BLE” proles available
- Plug-in for Bluetooth Developer Studio available
Bluetooth 4.1
- Support for Over the Air Update (OTA) and Scaernet
- GAP central and peripheral support for LE
Unique combinaon of Bluetooth LE and NFC
- NFC wakeup for products with zero standy power consumpon
- Added security with BT pairing via NFC “Out-of-band pairing”
- Android APK available for NFC pairing
- Select Bluetooth nodes individually via NFC
- Start mobile apps automacally
Evaluaon Kits
- PAN1761 EMK Starter Kit with NFC Antenna available
- SDK Demo project with NFC example
- SDK Library for “Out-of-band pairing”
- Android App as example applicaon and source code
OUTLINES
- Diagnosc and maintenance systems with requirement for zero standby power consumpon
- Healthcare and medical diagnosc systems without human control interface
- Bluetooth Low Energy sensor applicaons, which need to send data on request
- Automove Aermarket Products
- Industrial sensors and measurement devices
Parameter 0,1% BER Value Condition / Note
Receiver Sensivity (30.8% PER) - 90 dBm @ 500 kpbs / MSK (high-gain mode)
Output Power 0 dBm Maximum seng
Power Supply 1.8V - 3.6V Single operaon voltage
Transmit and Receive Mode 5,5 mA typ. Bluetooth Tx mode
Low Power Mode <1 µA
Operang Temperature Range -40C / +85C Industrial Range
(I2C)
BLOCK DIAGRAM
TECHNICAL CHARACTERISTICS
APPLICATIONS