First Edition LCD Module Technical Specification Apr 11, 2008 Final Revision KAKKEK ten. 1-99311D090J-FW-A-AAN Customer Customer's Product No OPTREX CORPORATION Minoru Akatsuka Approved : QUALITY ASSURANCE DIVISION Toshiyuki Okamoto DESIGN 2T Checked : Satoshi Sano Prepared : DESIGN 2T APPROVED By Signature : Date : Please return this specification within two month with your signature. If not returned within two month ,specification will be considered as having been accepted. T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 1/39 OPTREX ConfidentialCONTENTS Item Page CONTENTS APPLICATION OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION CO} ot] OF] Se | w INTERFACE TIMING BLOCK DIAGRAM 15 MECHANICAL SPECIFICATION 16 O;}ao sys] oo] oy eR] wl] pw OPTICAL CHARACTERISTICS 18 Oo RELIABILITY TEST CONDITION 21 _ _ INSPECTION STANDARDS 22 bo OTHER FEATURE 23 ww HANDLING PRECAUTIONS FOR TFT-LCD MODULE 24 PACKAGING SPECIFICATION 27 PRODUCTS NUMBER LABELING FORMS 31 LAMP UNIT for 9.0"WVGA 33 Rev. Date Page Comment T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 2/39 OPTREX Confidential1. APPLICATION This specification applies to color TFT-LCD module, T-55311D090J-FW-A-AAN. These specification papers are the proprietary product of OPTREX and include materials protected under copyright of OPTREX. No part of this document may be reproduced in any form or by any means without the express written permission of OPTREX. OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of OPTREX or of others. OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using the product. (1) Standard Usage Computers, office equipment, factory automation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by TFT-LCD directly. (2) Special Usage Medical equipment, safety equipment, transportation equipment, provided, however, that TFT-LCD is necessary to its operation. (3) Specific Usage Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. OPTREX should make a contract that stipulate apportionment of responsibilities between OPTREX and our customer. The product specified in this document is designed for Standard Usage unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for Standard Usage, they should first contact OPTREX sales representative for it's intended use in writing. OPTREX has been making continuous effort to improve the reliability of its products. Customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. OPTREX assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. Please contact and consult a OPTREX sales representative for any questions regarding this product. T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 3/39 OPTREX Confidential2. OVERVIEW T-55311D090J-FW-A-AAN is 9.0 color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit or 8 bit digital data, 800 x 480, 262k-color or 16.7M-color images are displayed on the 9.0 diagonal screen. Input power voltage is 3.3V for LCD driving. The type of data and control signals are digital and transmitted via LVDS interface per Typ. 30.4 MHz clock cycle. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION Display Area (mm) 6 BaD leew Number of Dots 800 x 3 CH) x 480 (V) Pixel Pitch (mm) 0.246 (H) x 0.246 (V) Color Pixel Arrangement RGB vertical stripe Display Mode Normally white TN Number of Color 262k(6 bit/color), 16.7M(8 bit/color) Luminance (cd/m?) 600 Wide Viewing Angle Technology Optical Compensation Film Viewing Angle (CR = 10) -~75~75(H), -60~80(V) Surface Treatment Anti-reflection and hard-coating 2H Electrical Interface LVDS 6 bit/8 bit) Optimum Viewing Angle(Contrast ratio) 6 o'clock Module Size (mm) 219.0 (W) x 136.2 (H) x 13.2 (D) Module Mass (g) 480 Backlight Unit CCEL, 2-tubes, edge-light, replaceable Characteristic value without any note is typical value. T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 4/39 OPTREX Confidential3. ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL MIN. MAX UNIT Power Supply Voltage for LCD VCC 0 4.0 V Logic Input Voltage VI 0.3 VCC+0.8 V Lamp Voltage VL 0 2000 Vrms Lamp Current IL 0 15 mArms Lamp Frequency FL -- 80 kHz Operation Temperature(Panel) Note 1,2) Top(Panel) -20 70 C Operation Temperature(Ambient) Nete 2) Top(Ambient) 20 70 C Storage Temperature Note 2) Tste -20 80 C [Note] 1) Measured at the center of active area and at the center of panel back surface 2) Top, Tstg < 40C : 90%RH max. without condensation Top,Tstg > 40C : Absolute humidity shall be less than the value of 90%RH at 40C without condensation. 4. ELECTRICAL CHARACTERISTICS (1) TFT-LCD Ambient temperature : Ta=25C ITEM SYMBOL | MIN. TYP. MAX. | UNIT Remarks Power Supply Voltages for LCD VCC 3.0 3.3 3.6 Vv *1) Power Supply Currents for LCD ICC > 370 500 mA *2) Permissive Input Ripple Voltage VRP - - 100 mVp-p | VCC =+38.3V High VIH 2.4 - VCC V MODE, SC Logic Input Voltage Low VIL 0 - 0.8 V MODE, SC *1) Power and signals sequence: tl1<10ms 200 ms < t4 0<t2<50ms 200 ms < t5 0<t8<50ms 0<t6 vec 0.9vccC LCD Power Supply Logic Signal 0.1VCC t1 Backlight Power Supply 1 t-pe! tal 6 t6 data: RGB DATA, DCLK, DENA, MODE, SC T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 5/39 OPTREX ConfidentialVCC-dip conditions: 1) When 2.6 V < VCC <3.0 V, td< 10 ms 2) When VCC < 2.6 V VCC-dip conditions should also follow the power and signals sequence. VCC ( -4-----4--- td << $f *2) VCC = +3.3 V, fu=31.6 kHz, fv=60 Hz, foLrk=30.4 MHz Display image of typical is 256-gray-bar pattern (8 bit), 480 line mode. *3) Fuse Parameter Fuse Type Name Supplier Remark VCC FCC16162AB Kamaya Electric Co., Ltd. *) *) The power supply capacity should be designed to be more than the fusing current. (2)Backlight Ta=25C ITEM SYMBOL] MIN. TYP. MAX. | UNIT Remarks Lamp Voltage VL 7 450 7 Vrms IL=12.0 mArms Lamp Current IL 6.0 12.0 14.0 |mArms *2),*6) Lamp Frequency FL 35 - 80 kHz *3) 800 - - Ta = 25C Starting Lamp Voltage VS 970 7 - Vrms Ta =0C 1020 7 - Ta =-20C *A)* = Lamp Life Time Lt | 50000 -- -- np |*4.*5), IL = 12.0 mArms Continuous operation [Note] *1) Please use synchronous inverter. *2) Lamp Current measurement method (The current meter is inserted in low voltage line.) CTH LCD CTH Power Module CTL Inverter |__| Supply pf T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 6/39 OPTREX Confidential*3) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep inverter as far from module as possible or use electronic shielding between inverter and module to avoid the interference. *4) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. *5) The life time of the backlight depends on the ambient temperature. The life time will decrease under low/high temperature. *6) Please use the inverter which has symmetrical current wave form as follows, The degree of unbalance: less than 10% The ratio of wave height: less than /2+10% Tou Ipy: High side peak / The degree of unbalance = | Ip, - Ip,,| /Irms x 100(%) A ; The ratio of wave height = Ip,(or Ip,) / Irms Tp Ip, Low side peak Vv CURRENT WAVE FORM T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 7/39 OPTREX Confidential5. INTERFACE PIN CONNECTION (1) CN 1(Interface Signal) Used connector: FI-SE20P-HFE (JAE) Corresponding connector: FI-S20SI|for discrete Wirel, FI-SE20MEl[for FPC] (JAE) Pin Symbol Function (ISP 6 bit compatibility mode) Function (ISP 8 bit No. 6 bit input | 8 bit input compatibility mode) 1 VCC +3.3 V Power supply < 2 VCC +3.3 V Power supply < 3 GND GND < 4 GND GND < 5 | Link 0O-| RO, R1, R2, R383, R4, R5, GO| R2, R3, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 6 | Link 0+| RO, R1, R2, R3, R4, R5, GO | R2, R38, R4, R5, R6, R7, G2 | RO, R1, R2, R38, R4, R5, GO 7 GND GND < 8 | Link 1-| G1, G2, G3, G4, G5, BO, B1_ | G3, G4, G5, G6, G7, B2, B38 | G1, G2, G38, G4, G5, BO, B1 9 |Link 1+]| G1, G2, G8, G4, G5, BO, B1_| G3, G4, G5, G6, G7, B2, B38 | G1, G2, G3, G4, G5, BO, B1 10 GND GND < 11 | Link 2-| B2, B38, B4, B5, DENA B4, B5, B6, B7, DENA B2, B38, B4, B5, DENA 12 | Link 2+| B2, B38, B4, B5, DENA B4, B5, B6, B7, DENA B2, B3, B4, B5, DENA 13 GND GND < 14_ | CLKIN- Clock < 15 |CLKIN+ Clock + < 16 GND GND < 17_| Link3- | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 18 | Link3+ | See: *2) RO, R1, GO, G1, BO, B1 R6, R7, G6, G7, B6, B7 19 | MODE Low=ISP 6 bit compatibility mode Blatconpa tibility mode 20 SC Scan direction control (Low=Normal, High=Reverse) *1) Metal frame is connected to signal GND. *2) Recommended wiring of Pin 17,18 (6 bit input) S vec transmitter 680 Q LOW data Pin 17 Pin 17 | S000 Pin 18 or Pin 18 620 Q (2) CN 2(Backlight) Backlight-side connector: BHR-04VS-1 (JST) Inverter-side connector: SM02(4.0)B-BHS(LF)(SN) (JST) Pin No. Symbol Function 1,2 CTH VBLH (High Voltage) 4 CTL VBLL (Low Voltage) [Note] VBLH-VBLL = VL T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 8/39 OPTREX Confidentiala. ISP 6 bit compatibility mode(6 bit input) (3) ISP data mapping CLKIN+/- AAA A IN DORMRMmA RAMA OA RMA RN Amma Link0+/- Link1+/- Link2+/- b. ISP 6 bit compatibility mode(8 bit input) 1CLK CLKIN-+/- IAEA EI DOM MAYA OMAR AMAMAACEX DOOMNR?AIM AACE Link0+/- Link1+/- Link2+/- Link3+/- c. ISP 8 bit compatibility mode K CLKIN+/- X X co X rs K ra X rs X rz Ko Rr K Ro X Link0+/- X X Xx Bl Xx BO Xx G5 X G4 X G3 Xx G2 Xx Gl Xx X X X X DENA Xx x Xx B5 X B4 X B3 Xx B2 Xx X X X X Xx B7 Xx Bo X G7 X G6 Xx R7 Xx R6 X X Link1+/- Link2+/- Page 9/39 OPTREX CORPORATION Link3+/- (AAA) T-55311DO90J-FW-A-AAN OPTREX Confidential6. INTERFACE TIMING LVDS transmitter input signal (1) Timing Specifications ITEM SYMBOL MIN TYP MAX UNIT Frequency fork 7 30.4 45 MHz DCLK Period tcLK 22.2 32.9 7 ns Active Time tHA 800 800 800 tcLK Blanking Time tHB 20 160 7 tcLkK Horizontal Frequency fu a 31.6 45 kHz Period tH 22.2 31.7 - us DENA Active Time tva 480 480 480 tH Blanking Time tvB 3 45 7 tH Vertical Frequency fy 55 60 75 Hz Period tv 13.3 16.7 18.2 ms [Note] 1) DENA (Data Enable) should always be positive polarity as shown in the timing specification. 2) DCLK should appear during all invalid period. 3) LVDS timing follows the timing specifications of LVDS receiver IC: THC63LVDF84B(Thine). 4) In case of blanking time fluctuation, please satisfy following condition. tvBn > tvBn-1 3(tH) T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 10/39 OPTREX Confidential(2) Timing Chart a. Horizontal Timing Chart DCLK | | | | | | First Data UU UUU FUUU L- Last Data ROD Invalid bata J I \ 2 \ 3 OX \ X 200 ! so Invalid Data \ typ tHa DENA \\ Vv b. Vertical Timing Chart LINE DATA tvs A Invalid Data A ww ty=1/fu Vv DENA | A tv=l/fy Vv T-55311DO90J-FW-A-AAN (AAA) OPTREX CORPORATION Page 11/39 OPTREX Confidential(3) Color Data Assignment __a.6 bit input INPUT DATA R DATA G DATA B DATA COLOR R5 R4_ RB? R2:R1: RO| GS G4! G3! G2! G1) Go| BS} B4: B38! B2 | Bl BO MSB LSB _|MSB LSB _|MSB LSB BLACK 0:0:0:0:0:0}/0:0:0:0:0:0]0:0:0:0:0:0 RED@3) 1:1: 4:1:1:1/0:0:0:0:0:0{[0:0:0:0: 0:0 GREENG63)}0:0:0:,0:,0:,;0]/1:1:1:51:51:1/0:0:50:0:0.0 BASIC. |BLUE@3) 0:0:0:0:0:0/0:;0:0:0:0:0/;/ 1:1: 1:1: 1:1 COLOR |CYAN 0:0:0:0:;0: 071: 1: 1:12:12: 71 4) 12:72:23 74 171 MAGENTA] 1:1: 1:1:1:1/0:0:0:0:0:0]1:1:1:1:1:1 YELLOW Titi ti li tli lt} 1iti tit: 1t:1;,0:0:0:0:0: 0 WHITE Te dlipdtli li tilt] ip lit: ti le lf} iil: ltl: tilil REDQ) 0:0:0:0:0:1/0:0:0:0:0:0]0:0:0:0:0: 0 RED@Q) 0:0:0:0:1:0/0:0:0:0:0:0]0:0:0:0:0: 0 RED RED@2) 1:1: 4:1:1:0{0:0:0:0:0:0{[0:0:0:0: 0:0 RED@3) Titi tilt: 1:1/,0:0:0:0:0:0{,0:0:0:0:0:0 GREENG@) |0:0:0:,0:,0:0/0:0:0:0:0:1/0:0:0:0:0.0 GREEN2) |0:0:0:0:,0:0/0:0:0:0:1:0/0:0:0:0:0.0 GREEN GREENG2)}0:0:0:,50,0:;0]/1:1:51:51:51:0/0:0:0:0:0.0 GREENG63)}0:0:0:50:50:50}/1:51:51:51:51:51/0:0:50:50:50 50 BLUEQ) 0:0:0:0:0:0}/0:0:0:0:0:0]0:0:0:0: 0: 1 BLUE@) 0:0:0:0:0:0}/0:0:0:0:0:0]0:0:0:0:1:0 BLUE BLUE@2) 0:0:0:0:0:0/0:0:0:0:0:0]1:1:1:1:1:0 BLUE3) 0:0:0:0:0:0/0:5:0:5:0:0:0:0}/1: 1:1: 1:1:51 [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 12/39 OPTREX ConfidentialINPUT DATA R DATA G DATA B DATA R7 :REIRSER4:R3BiR2iR1! RO | G7 }G6!G5:G4!G3!G2iG1: GO | B7 'B6!B5:!B4:!B3:iB2:B1 = a ow LSB|MSB LSB|MSB BLACK Oo Oo Oo Oo RED(255) GREEN(255) BLUE(255) CYAN MAGENTA YELLOW WHITE RED(1) RED(2) DiPGdrRiPiPiDdidicdireia DiPM@rRiPiPididicdgirio DiPGMfrRiPiPidididirFia DiPGMfrRiPiPidididirFia DiPGdrRiPiPiDdidicdireia DiPGdrRiPiPiDdidicdireia ReiOPTRiBPiPicmdicgidir-ria Dime te iPiPidiadiaGdie DiPGMTRiPi@GMikBiranirica CDiPVMTRiPiPVirPicdirFPidico CDiPGMTRiPiPMiPidirFPidico SCi@MTRiPiPMiPicdirFPiadico SCi@TRiPitMiPiPdirFiadico CDi@G@TRirPicdiPicdirPiadico CDi@@TRirPicGdiFPicdirFPidico DiPGMTRiPi@GMikBiranirica STiPMJreidirPifPtiFb:iad:ia SiPMJreidiryPiPirPiadiadio STiPMJridiPiPirFPiaqiaqio STiPMJridiPiPirFPiaqiaqio STiPMJrReiDdirPiPiFPiaqiaqio STiPMJrReiDdirPiPiFPiaqiaqio SiPMJrRicdirPirPirPiadiadio CDi@DM]RPi@dirPiPiRPicdicdia RED(@255) GREEN() GREEN(2) GREEN(255) BLUE() BLUE() BLUE(255) [Note] 1) Definition of gray scale Color (n) ---n indicates gray scale level. Higher n means brighter level. 2) Data 1:High, 0: Low T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 13/39 OPTREX Confidential(4) Display Position and Scan Direction D(X, Y) shows the data number of input signal for LCD panel signal processing PCB. SC: Low & wee DU,480) 7s (800, 480) CN2 SC: High D800, 1) CN2 T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 14/39 OPTREX Confidential7. BLOCK DIAGRAM CN1 Timing signal Display data Timing CF control Gt ; ontroter G2 TFT-LCD Drivers(gate) Power ==> G480 stot ott Power Supply | Drivers(source) Circuit I/F Connector $2399 CCFL T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 15/39 OPTREX Confidential8. MECHANICAL SPECIFICATIONS (1) Front Side m U \ o oO + Zz c Oo a K- o N O wo : . Wo oO (s or) Nc _ 5 ES O.5mm projection (ONINSdO 152358) 202! (s22) (V4HV SATLOVY) 8081 zt y , a : lies __ __ JL __ __ e = T | - . | | @ co | | a oc FE | | oN NN lo MN O oO oO = Kb NY | a | m | O | N 2|< = oF Z| n | a| ~ | > O;uW | | | NI 5 4 Lt} |= - - - - + = 4d NI} O A LU} <x ma} o | Y | | + |O S/ e | | | LO O) o | | ~ | x | | @ . pd Thon . cE] oN YY ~ | | co oa al 3 (189) pee i Z9E1 +S 2 (2'2) TT << Lo Ky <t : = ee ie (s'9r) S9V oO] c LSssss b- | wd xc [gq <t Ee oO f 7 & NZ ul 4 - - - 58 = ae aa < mt < soo (Unit: mm) T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 16/39 OPTREX Confidential(2) Rear Side volyoatoud sleue piriite (LSP) L-SAPVO-YHE:ZNO TPepou Sse TEN MNGT OF Si eouersloLcl (SVP )S4H-dOZSS-14:1NO COQIWOGOVY OS VaddvV TSeVi~ [A - - 1 (vi) GE 8S d|fe] \ ale] Vv 9 cid vvOd (Unit:mm) Page 17/39 OPTREX CORPORATION (AAA) T-55311DO90J-FW-A-AAN OPTREX Confidential9. OPTICAL CHARACTERISTICS Ta=25C, VCC=3.8V, Input Signals: Typ. Values shown in Section 6 ITEM SYMBOL |CONDITION| MIN TYP MAX | UNIT |Remarks Contrast Ratio CR Ov=0, OH=0 390 600 *1)*2)*5) Luminance Lw Ov=0, OH=0 450 600 ed/m2 | *1)*5) Luminance Uniformity ALw Ov=0, 86H=0 30 % *1)*3)*5) tr Ov=0, OH=0 4 ms |*1)*4)*5) Response Time tf 8v=0, OH=0 12 ms |*1)*4)*5) Horizontal 6 -~65~65 | -75~75 *1)*5 . . = a H CR > 10 ) ) Viewing Vertical Ov 50~70 | -60~80 *1)*5) Angle Horizontal 0H ORS -~75~75 | -85~85 *1)*5) Vertical Ov 7 -~75~75 | -85~85 *1)*5) Image sticking tis 2h 2 s *6) Rx 0.543 0.573 0.603 Red Ry 0.299 0.329 0.359 Color Gx 0.298 0.328 0.358 ; Green *7)* Coordinates Gy Ov=0, OH=0 | 0.506 0.536 0.566 1)*5) Bx 0.131 0.161 0.191 Blue By 0.127 0.157 0.187 W 0.283 0.313 0.343 White * Wy 0.299 0.329 0.359 [Note] These items are measured using CS1000(MINOLTA) for color coordinates, EZContrast(ELDIM) for viewing angle and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the lamp unless noted. Condition: IL = 12.0 mArms, FL= 50 kHz Measurement method for luminance and color coordinates is as follows. 0 (Field) Photodetector Luminance :6=2 (BM-5A) Color coordinates 0=1 TFT-LCD module | 500 mm (CS1000) The luminance is measured according to FLAT PANEL DISPLAY MEASUREMENTS STANDARD (VESA Standard). T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 18/39 OPTREX Confidential*1) Measurement Point Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center Luminance Uniformity: point 1~5 shown in a figure below (1,1) 200 400 600 1 2 120 a ad 5 240 a 3 4 360 Ba a (800,480) *2) Definition of Contrast Ratio CR= Luminance with all white pixels / Luminance with all black pixels *3) Definition of Luminance Uniformity ALw=[Lw(MAX)/Lw(MIN)-1] x 100 *4) Definition of Response Time White Luminance 10% Black 10% *5) Definition of Viewing Angle (v, 9) Normal Axis \ \ ' \ Oy UpperG) ) \ oN a \ i , 1 ' \ \ \ I Ia___-. Right (+) ne LCD panel Lower(-) T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 19/39 OPTREX Confidential*6) Image sticking: Continuously display the test pattern shown in the figure below for two-hours. Then display a completely white screen. The previous image shall not persist more than two seconds at 25C. heeeeeeeeeeeeeeeeeeeeeeeeeeeneeeneeetennnnttnnnnneentel A Black Lines TEST PATTERN FOR IMAGE STICKING TEST T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 20/39 OPTREX Confidential10. RELIABILITY TEST CONDITION (1) Temperature and Humidity ITEM CONDITIONS HIGH TEMPERATURE 40C, 90%RH, 240 h HIGH HUMIDITY OPERATION (No condensation) HIGH TEMPERATURE OPERATION 70C, 240 h LOW TEMPERATURE OPERATION -20C, 240 h HIGH TEMPERATURE STORAGE 80C, 240 h LOW TEMPERATURE STORAGE -20C, 240 h ; BETWEEN ~-20C (1h) and 80C(h), THERMAL SHOCK (NON-OPERATION) 100 CYCLES (2) Shock & Vibration ITEM CONDITIONS Shock level: 1470 m/s? (150G) SHOCK Waveform: half sinusoidal wave, 2 ms (NON-OPERATION) | Number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs Vibration level: 9.8 m/s? (1.0G) Waveform: sinusoidal VIBRATION Frequency range: 5 to 500 Hz (NON-OPERATION) | Frequency sweep rate: 0.5 octave /min Duration: one sweep from 5 to 500 Hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) Judgment standard The judgment of the above tests should be made as follow: Pass: Normal display image, no damage of the display function. (ex. no line defect) Partial transformation of the module parts should be ignored. Fail: No display image, damage of the display function. (ex. line defect) T-55311D090J-FW-A-AAN (AAA) OPTREX CORPORATION Page 21/39 OPTREX Confidential