High Isolation Power Transformers PA200xNL Basic and Operational Insulation 1500Vrms isolation (380Vrms continuous) Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up Electrical Specifications @ 25C - Operating Temperature -40C to 130C5 Turns Ratio Pri-Sec Isolation (VRMS) MAX1 V*sec Primary Inductance (H MIN) Leakage2 Inductance (H MAX) DCR Primary ( MAX) DCR Secondary ( MAX) Package Size (L x W x H) (mm MAX) PA2001NL 1:1 1500 12 403 0.46 0.60 0.60 8.6 x 6.7 x 2.5 PA2002NL 1:1:1 1500 60 1800 0.60 1.60 1.60 9.0 x 8.6 x 7.6 PA2004NL 1:1:1 1500 20 437 0.85 0.85 0.85 8.6 x 6.7 x 3.6 Part3,4 Number OPERATIONAL INSULATION BASIC INSULATION (1.4MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) PA2005NL 1:1:1 1500 26 840 0.75 1.05 1.05 11.8 x 8.8 x 4.0 PA2006NL 1:1 1500 26 864 0.75 0.82 0.82 11.8 x 8.8 x 4.0 PA2007NL 1:1 1500 53 1490 0.80 1.15 1.15 9.0 x 8.6 x 7.6 PA2008NL 2:1:1 1500 52 1425 0.80 1.15 0.575 9.0 x 8.6 x 7.6 PA2009NL 2.5:1:1 1500 47 1486 0.80 1.15 0.425 9.0 x 8.6 x 7.6 Notes: 1. The maximum volt-sec limits the peak flux density to 2800 Gauss when used in a unipolar drive application. For bi-polar drive applications, a maximum volt-sec of two times this rating is acceptable (i.e. 2* (volt*sec rating) Volt*sec = (voltage applied to the primary) * dutycycle / Frequency = V * alpha / Freq_ Hz = V * sec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard tape and reel specification EIA481. 4. 5. 6. The "NL" suffix indicates an RoHS-compliant part number. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Continuous isolation voltage confirmed by 125C/1000hrs accelerated aging with the bias voltage applied between primary and secondary windings. Mechanical Schematic PA2001NL 0.365 9,27 .340 MAX 8,64 1 PA2001NL Date Code Country of Origin 4X .100 2,54 .200 5,08 0.07 1,78 3 .098 MAX 2,49 4 .240 6,1 .005/0,13 4 SURFACES 1 6 .265 MAX 6,73 power.pulseelectronics.com SUGGESTED PAD LAYOUT P663. K (08/18) 1 6 3 4 Weight .........................0.28 grams Tape & Reel .....................1500/reel Tube ...................................60/tube Inches mm Unless otherwise specified, all tolerances are .010 0,25 Dimensions: http://www.power.pulseelectronics.com/contact High Isolation Power Transformers PA200xNL Basic and Operational Insulation Mechanicals (CONTINUED) Schematics PA2002NL 3 1 6 4 8 5 PA2002NL Weight .........................0.60 grams Tape & Reel ......................400/reel Tube ...................................50/tube Inches mm Unless otherwise specified, all tolerances are .010 0,25 Dimensions: Mechanicals Schematics PA2004NL 1 1 6 1 2 2 .355 9,27 .340 MAX 8,64 5 3 6 6 5 PA2004NL Date Code Country of Origin .200 5,08 0.07 1,78 4 3 4X .265 MAX 6,73 .140 3,56 .100 .070 2,54 1,78 .220 4 .240 5,59 6,1 .320 8,13 .005/0,13 4 SURFACES 2 .100 2,54 3 .140 MAX 3,56 power.pulseelectronics.com 4 .200 5,08 Inches mm Unless otherwise specified, all tolerances are .010 0,25 Dimensions: SUGGESTED PAD LAYOUT P663. K (08/18) Weight .........................0.23 grams Tape & Reel ......................800/reel Tube ...................................75/tube http://www.power.pulseelectronics.com/contact High Isolation Power Transformers PA200xNL Basic and Operational Insulation Mechanical (CONTINUED) Schematic PA2005NL, PA2006NL PA2005NL 2 .430 10,92 .460 11,68 .070 1,78 .330 8,38 1 PA2005NL PA2006NL .340 8,64 5 3 6 6 4 .250 6,35 Date Code Country of Origin .320 8,13 .170 4,32 .330 8,38 1 3 .100 2,54 4 SUGGESTED PAD LAYOUT .160 4,06 MAX .005/0,13 6 SURFACES PA2006NL 1 3 6 4 Weight ..........................0.48 grams Tape & Reel ......................900/reel Tube ...................................60/tube Inches mm Unless otherwise specified, all tolerances are .010 0,25 Dimensions: Mechanicals Schematics PA2007NL, PA2008NL, PA2009NL PA2008NL / PA2009NL 1 3 6 4 8 5 PA2007NL 1 8 4 5 Weight .........................0.60 grams Tape & Reel ......................400/reel Tube ...................................50/tube Inches mm Unless otherwise specified, all tolerances are .010 0,25 Dimensions: 3 power.pulseelectronics.com * for PA2007NL the pads for pins 3 and 6 in the suggested pad layout should not be used in the layout P663. K (08/18) http://www.power.pulseelectronics.com/contact High Isolation Power Transformers PA200xNL Basic and Operational Insulation For More Information Pulse Worldwide Pulse Europe Headquarters Pulse Electronics GmbH 15255 Innovation Drive Ste 100 Am Rottland 12 San Diego, CA 92128 58540 Meinerzhagen U.S.A. Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 2354 777 100 Fax: 49 2354 777 168 Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 3 Fraser Street 0428 DUO Tower Singapore 189352 Pulse North Asia 1F., No.111 Xiyuan Rd Zhongli City Taoyuan City 32057 Taiwan (R.O.C) Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4356768 Fax: 886 3 4356820 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2018. Pulse Electronics, Inc. All rights reserved. 4 power.pulseelectronics.com P663. K (08/18) http://www.power.pulseelectronics.com/contact