Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 12.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Photoelectric sensor
opposed mode sensor (emitter)
Q456EQ5
M12 x 1 connector
Wiring diagram
Opposed mode sensors consist of a sepa-
rate emitter and receiver. These are instal-
led directly opposite each other so that the
light from the emitter is aimed directly at the
receiver. When an object interrupts or wea-
kens the light beam, the sensor switches.
Opposed mode sensors are the most relia-
ble photoelectric sensors for detection of
opaque targets. An excellent contrast bet-
ween light and dark conditions and an ex-
tremly high excess gain are typical of this
sensing mode, thus allowing operation
over larger distances and under difficult
conditions.
Excess gain curve
Excess gain in relation to the distance
+
BN (1)
BU (3)
1
10
100
0,1
1
10
100 m
Type Q456EQ5
Ident-No. 3038659
Type of light IR
Wave length 880 nm
Max. sensing range [m] 0... 60 m
Operating temperature -40 ...+ 70 °C
Rated operational voltage (DC) UB10... 30 VDC
Rated operational current (DC) Ie 150 mA
No-load current I0 50 mA
Short-circuit protection yes, cyclic
Reverse polarity protection yes
Max. switch-on delay 100 ms
Housing style rectangular; Q45
Dimensions 56,4 x 44,5 x 103 mm
Housing material plastic, PBT
Lens Kunststoff, Acryl
Wiring connector, M12 x 1
Degree of protection IP67
Supply voltage indication LED green
LED-Display
30
ø 5
6,4
56,4
M30 x 1,5
7,1
M12 x 1
LED GN
LED RD
LED YE
69
103
87,6
44,5