ADVANCED - INTERCONNECTIONS. Ball Grid Array (BGA) Adapters 5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 * Fax 401-823-8723 Email info@advintcorp.com Internet http:/Avww.advintcorp.com BGA Adapters Features: * Soldering BGA Device to adapter subjects BGA to less thermal stress than soldering BGA directly to a PCB due to the adapters lower mass. Uses same footprint as BGA device. Custom adapters available for heat sink attachment. Terminals: Brass - Copper Alloy (C36000), ASTM-B-16 Plating: G - Gold over Nickel Body Material: FR-4 Glass Epoxy, U.L. Rated 94V-O How It Works: DEVICE << Device to Adapter ADAPTER POPeee CSE sii Lis es een SOCKET Reflow (solder) Socket to PCB PC BOARD Standard Adapter (A): Extraction Slot Adapter (AX): Mates with Standard Socket (S) * Slots allow AIC extraction tool (sold * Adapter size equals BGA Device separately) to easily remove device/ body + .079/(2.0) adapter assembly from socket. * Mates with Extraction Socket (SB) or Guide Post Socket (SG) Adapter size equals the BGA Device body + .157/(4.0) BGA Body + .079/(2.0) BGA Body + .157/(4.0) [ .039/(1.0) k .079/(2.0) BGA Device a BGA Device Dry rererercrorr ere ren rere oorererrrere oA Device oon AAV BGA Adapter Extraction Tool: * Insert T bar end of tool into extraction slot adapter. Slide tool to end of slot and pry adapter from socket. * Repeat in additional slots until adapter is separated from socket. ees conan Device Package Size or | < 1.024 (26mm) | > 1.024 (26mm) _ J 4 f _ Tool P/N 5566 5504 | Blade Width | .373/(9.5mm) 675/(17.1mm) } F 4 Blade Width P/N 5504 Terminals 1.27mm & 1.5mm Pitch 1.0mm Pitch 0.80mm Pitch 0.75mm Pitch Type -638 Type -715 Type -700 Type -757 LEA 146 (3.71) i i I St | te o8 or yo28) ok oa 18 (0.46) Dia. Me ! (0.28)Dia. ' (0.20)Dia. How To Order 1F G A XXX -638 G TC T- Footprint Dash# Terminal Plating If Applicable* G - Gold Body Type Terminal Type F-FR-4 Pitch Number of Positions B = .059/(1.5mm) *See BGA Footprint Section or web site G = .050/(1.27mm) H = .039/(1.0mm) J = .0315/(0.80mm) Model Type K = .0295/(0.75mm) A = Standard Adapter AX = Extraction Slot Adapter (1.5, 1.27, 1.0mm Pitch only) Page 4 Products shown covered by patents issued and/or pending. Specifications subject to change without notice. inch/(mm)