Specialty Terminals
70F-110-20-PB, 70F-110-32-PB
Female Quick-Slide, Vinyl Insulated with Insulation Grip
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted with Insulation
Grip
Maximum Operating Temp: 221˚F (105˚C)
Maximum Current: Same as Wire
Insulator Material: Vinyl
Terminal Material: Brass
Insulation Grip Material: Copper
Plating: Tin
Installation Information
For use on stranded copper wire only.
Strip away the end 3/16 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M Scotchlok Crimping Tool TH-450.
L
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
Barrel Crimp (Electrical)
Insulation Crimp (Mechanical)
3M™ Product
Number
Wire
Range
(AWG)
Mates with Tab
LBarrel
I.D.
Maximum
Insulation
Diameter
Width x
Thickness
70F-110-20-PB 26-22 .110 x 0.20 0.63 .040 .075
70F-110-32-PB 26-22 .110 x .032 0.63 .040 .075
Engineering Specification
Crimp-Type Female Quick-Slide connectors shall,
electrically and mechanically, connect permanently
to a prestripped end of a stranded copper wire, and
have a tongue portion with fingers which grip a Male
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Termination.
The connector line shall offer tongue variations (sized
to grip male tabs 0.110˝ x 0.020˝ or 0.110˝ x 0.032˝)
and barrel variations in construction, non- insulated,
vinyl insulated with insulation grip, nylon fully
insulated, etc.
The Vinyl Insulated Miniature 0.110˝ Female
Disconnect with insulation grip, shall be tin plated
0.010˝ thick brass with a tongue for gripping a 0.110˝
male tab of either 0.020˝ or 0.032˝ thickness and with
a barrel covered by a copper insulation grip, which is
covered by a vinyl sleeve, color coded and sized for a
specified (AWG) wire range (26-22).
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your
purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability
This product will be free from defects in material and manufacture for a period of five (5) years from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within
the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product,
regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M Company.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800-245-3573
Fax 800-245-0329
www.3M.com/electrical
Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
78-8131-7368-5-A
