AT-2210(40) - Hirose Connector

83

-(40)0122AT

3 421

3dB

E

3.6

1.4MAX

(0.65)

(0.2)(0.2) 1.20.81.2

4

(1.2) 1.6 (1.2)

Soldering areas

■Features

1. Small Size and Lightweight

4mm x 3.6 mm x 1.4 mm max height and weighting

only 0.1g.

2. Wide Range of Variations for Each Type

of Attenuator

Attenuation levels available in 1 dB steps from 0 to

10 dB, and 20 dB for a total of 12 types of

variations.

3. Automatic placement

Supplied in embossed packaging to allow

placement with automatic equipment.

Individual piece packaging is also available.

■Product Specifications

Ratings

Frequency range

Characteristic impedance

Maximum input power

DC to 2.5GHz (Note)

50ø

1W

Operating temperature

Operating humidity

-10ç to +65ç

95% max.

Item

1.Vibration

2.Shock

3.

Temperature cycle

Characteristic requirement Conditions

No electrical discontinuity of 1µs or more.

No damage, cracks, or parts dislocation.

Frequency of 10 to 2000 Hz, overall amplitude of 1.5mm,

acceleration of 98m/s2, 2 hours in each of the 3 directions.

Acceleration of 490m/s2, sine half-wave waveform, 3 cycles in

each of the 3 axis.

Temperature : -55ç /+15ç to +35ç /+85ç /+15ç to +35ç

Time : 30

/

2 to 3

/

30

/

2 to 3 (Minutes)

5 cycles

Note: DC to 600MHz for AT-2220.

Component

Attenuation element

Material Finish

Metal film Tin-lead plated

The test method conforms to MIL-STD-202.

■Materials

AX:Fixed attenuator

Series name :2200 Series

Attenuation

00-(0) : 0 dB (Through)

01 : 1dB

06 : 6dB

(40): RoHS Compliant

1

2

3

4

■Ordering information

■Dimensions

AT-2203 shown

SMT Stripline Mounting Fixed Attenuators

AT-2200 Series

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

AT-2200 Series●SMT Stripline Mounting Fixed Attenuators

84

AT-2203(40) AT-2210(40)

■Specifications

■Typical data

Part number

Attenuation (dB)

DC~

1,000MHz

1,000~

2,000MHz

2,000~

2,500MHz DC~2,500MHz

V.S.W.R (Max) Characteristic

Impedance (ø)

Power

(W)

Mounting surface

temperature (ç Max.) at time

of maximum input power

Weight

(g)

AT-2200-(0)(40)

AT-2201(40)

AT-2202(40)

AT-2203(40)

AT-2204(40)

AT-2205(40)

AT-2206(40)

AT-2207(40)

AT-2208(40)

AT-2209(40)

AT-2210(40)

AT-2220(40)

0+0.3

0

1±0.3

2±0.3

3±0.3

4±0.3

5±0.3

6±0.3

7±0.3

8±0.3

9±0.3

10±0.3

0+0.5

0

1±0.5

2±0.5

3±0.5

4±0.5

5±0.5

6±0.5

7±0.5

8±0.5

9±0.5

1.2

50

1

+85

0.1

10±0.5

20±1.5(DC to 600MHz) 1.2(DC to 600MHz)

10±0.7 1.2

1.2

1.2 1.25

1.25

Note: When ordering packaged on tape and reel, add (06) after the end of the part number. One reel = 1,000 pieces

1.75

2.00

2.25

3.00

3.25

3.50

3.75

4.00

4.25

0.0 0.5 1.0 1.5 2.0 2.5 3.0

2.50

2.75

0.0 0.5 1.0 1.5 2.0 2.5 3.0

1.50

1.45

1.40

1.25

1.20

1.15

1.10

1.05

1.00

1.35

1.30

0.0 0.5 1.0 1.5 2.0 2.5 3.0

1.50

1.45

1.40

1.25

1.20

1.15

1.10

1.05

1.00

1.35

1.30

0.0 0.5 1.0 1.5 2.0 2.5 3.0

8.75

9.00

9.25

10.00

10.25

10.50

10.75

11.00

11.25

9.50

9.75

ATTENUATION

Frequency(GHz)

VSWRVSWR

Frequency(GHz)

Frequency(GHz) Frequency(GHz)

(dB)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

85

AT-2200 Series●SMT Stripline Mounting Fixed Attenuators

250

ç

30 sec. max.

90±30 sec.

Time(s)

230

180

50

150

0

200

100

10 sec. max.

BRecommended Solder temperature profile

BRecommended Mounting Example

The attenuators can be placed using reflow or manual soldering

Manual Soldering

Tip temperature: 350ç max. for 3 sec. max.

Note 1: Do not touch the ceramic portion with the soldering iron tip.

Note: This attenuator is intended for a one-time use. Do not re-solder or re-use.

●Reflow Soldering (Temperature Profile Recommendations)

■Mounting and Soldering Recommendations

AT-2200(40)Grounding Pattern

Ceramic Portion

πThe dotted line portion indicates the position of the pattern.

50øLine

Board

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

04/2009

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Hirose Electric:

AT-2200-(0)(40) AT-2201(40) AT-2201(46) AT-2202(40) AT-2203(40) AT-2205(40) AT-2205(46) AT-2206(46)

AT-2207(46) AT-2208(40) AT-2208(46) AT-2209(40) AT-2210(40) AT-2210(46) AT-2220(46) AT-2209(46) AT-

2200-(0)(46) AT-2203(46) AT-2206(40) AT-2202(46) AT-2204(46) AT-2204(40) AT-2220(40) AT-2207(40)