ER432D-5A - Teledyne Technologies

www.teledynerelays.com 432/1203/Q1

ESTABLISHED RELIABILITY

SERIES

432

ESTABLISHED RELIABILITY

TO-5 RELAYS

SENSITIVE DPDT

DESCRIPTION

The TO-5 relay, originally conceived and developed by Teledyne, has become

one of the industry standards for low-level switching from dry circuit to 1

ampere. Designed for high-density PC board mounting, its small size and low

coil power dissipation make the 432 relay one of the most versatile

ultraminiature relays available.

The following unique construction features and manufacturing techniques

provide excellent resistance to environmental extremes and overall high

reliability.

• All welded construction.

• Unique uni-frame design, providing high magnetic efficiency and

mechanical rigidity.

• High force/mass ratios for resistance to shock and vibration.

• Advanced cleaning techniques provide maximum assurance of internal

cleanliness.

• Precious metal alloy contact material with gold plating assures excellent

high current and dry circuit switching capabilities.

The Series 432D and 432DD relays have internal discrete silicon diodes for

coil suppression and polarity reversal protection. The hybrid 432T relay has an

internal silicon suppression diode and a transistor driver. This hybrid package

reduces required PC board floor space by reducing the number of external

components needed to drive the relay.

By virtue of its inherently low intercontact capacitance and contact circuit

losses, the 432 relay has shown its worth as an RF switch for frequency

ranges well into the UHF spectrum (see Figure 1). In addition, the sensitive

Series 432 relay has a high resistance coil, thus requiring extremely low

operating power (200 milliwatts, typical at room temperature). The advantages

of reduced heat dissipation and power supply demands are a plus.

INTERNAL CONSTRUCTION

SERIES

DESIGNATION RELAY TYPE

432 DPDT basic relay

432D DPDT relay with internal diode for coil transient suppression

432DD DPDT relay with internal diodes for coil transient suppression and polarity

reversal protection

432T DPDT relay with internal transistor driver and coil transient suppression

diode

UPPER

STATIONARY

CONTACT

LOWER

STATIONARY

CONTACT

MOVING

CONTACT

UNI-FRAME

ARMATURE

ENVIRONMENTAL AND

PHYSICAL SPECIFICATIONS

Temperature

(Ambient) –65°C to +125°C

Vibration

(General Note 1) 30 g’s to 3000 Hz

Shock

(General Note 1)

75 g’s,

6 msec, half-sine

Acceleration 50 g’s

Enclosure Hermetically sealed

Weight 0.159 oz. (4.5g) max.

www.teledynerelays.com 432/1203/Q1

ESTABLISHED RELIABILITY

PERFORMANCE CURVES

(NOTE 2)

SERIES 432

GENERAL ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Notes 2 & 3)

DETAILED ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Note 3)

Contact Arrangement 2 Form C (DPDT)

Rated Duty Continuous

Contact Resistance 0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28Vdc (measured 1/8" from header)

Contact Load Ratings (DC)

(See Fig. 2 for other DC

resistive voltage/current ratings)

Resistive: 1 Amp/28Vdc

Inductive: 200 mA/28Vdc (320 mH)

Lamp: 100 mA/28Vdc

Low Level: 10 to 50 μA/10 to 50mV

Contact Load Ratings (AC) Resistive: 250 mA/115Vac, 60 and 400 Hz (Case not grounded)

100 mA/115Vac, 60 and 400 Hz (Case grounded)

Contact Life Ratings

10,000,000 cycles (typical) at low level

1,000,000 cycles (typical) at 0.5A/28Vdc resistive

100,000 cycles min. at all other loads specified above

Contact Overload Rating 2A/28Vdc Resistive (100 cycles min.)

Contact Carry Rating Contact factory

Coil Operating Power 200 milliwatts typical at nominal rated voltage @ 25°C

Operate Time 4.0 msec max. at nominal rated coil voltage

Release Time 432 Series: 2.0 msec max. 432D, 432DD, 432T Series: 7.5 msec max.

Contact Bounce 1.5 msec max.

Intercontact Capacitance 0.4 pf typical

Insulation Resistance 10,000 megohms min. between mutually isolated terminals

Dielectric Strength Atmospheric pressure: 500 Vrms/60Hz 70,000 ft.: 125 Vrms/60Hz

Negative Coil Transient (Vdc) 432D, 432DD, 432T 1.0 max

Diode P.I.V. (Vdc) 432D, 432DD, 432T 100 min.

432T

Transistor

Characteristics

Base Turn Off Voltage (Vdc) 0.3 min.

Emitter-base breakdown Voltage (BVEBO) (@25°C) (Vdc) 6.0 min.

Collector-base breakdown Voltage (BVEBO) (@25°C & lc = 100 μA) (Vdc) 75 min.

BASE PART

NUMBERS

(See Note 10 for full P/N example)

432-5

432D-5

432DD-5

432T-5

432-6

432D-6

432DD-6

432T-6

432-9

432D-9

432DD-9

432T-9

432-12

432D-12

432DD-12

432T-12

432-18

432D-18

432DD-18

432T-18

432-26

432D-26

432DD-26

432T-26

Coil Voltage (Vdc) Nom. 5.0 6.0 9.0 12.0 18.0 26.5

Max. 7.5 10.0 15.0 20.0 30.0 40.0

Coil Resistance

(Ohms ±10% @25°C)

432, 432D, 432T (Note 4) 100 200 400 850 1600 3300

432DD (Note 4) 64 125 400 850 1600 3300

Coil Current (mAdc @25°C)

(432DD Series)

Min. 56.8 36.3 18.1 11.7 9.6 7.0

Max. 78.1 48.9 23.6 15.0 12.2 8.8

Coil Current (mAdc @25°C)

(432T Series) (Note 7) Min. 43.5 26.4 19.7 12.2 9.7 6.9

Max. 59.3 35.4 25.8 16.7 13.1 9.5

Pick-up Voltage (Vdc, Max.) 432, 432D 3.5 4.5 6.8 9.0 13.5 18.0

432DD 3.7 4.8 8.0 11.0 14.5 19.0

432T (Note 7) 3.6 4.8 7.8 11.0 14.5 19.0

Base Current to Turn On (mAdc, Max.) (432T Series) (Note 7) 1.50 1.00 0.75 0.47 0.38 0.24

Drop-out Voltage (Vdc)

432, 432D, 432T

(Note 7)

Min. 0.14 0.18 0.35 0.41 0.59 0.89

Max. 2.5 3.2 4.9 6.5 10.0 13.0

432DD Min. 0.7 0.8 0.9 1.0 1.1 1.3

Max. 2.6 3.0 4.5 5.8 9.0 13.0

.01 0.5 .1 .5 1.0

FREQUENCY (GHz)

TYPICAL RF PERFORMANCE

INSERTION LOSS

ISOLATION ACROSS CONTACTS

ISOLATION ACROSS POLES

1.92

1.22

1.07

1.02

1.01

1.00

VSWR

300

250

200

150

100

0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

LOAD CURRENT (AMPS DC)

TYPICAL DC CONTACT RATING (RESISTIVE)

LOAD VOLTAGE (VDC)

FIGURE 1 FIGURE 2

RETURN LOSS (VSWR)

www.teledynerelays.com 432/1203/Q1

ESTABLISHED RELIABILITY

DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)

.370

(9.40)

DIA. MAX.

.335

(8.51)

DIA. MAX.

.375 (9.52) MAX.

+.002 (.05)

.017 (.43) –.001 (.03) DIA.

TRANSISTOR BASE

CONNECTION FOR

432T ONLY

WIRE LEAD: .75 (19.05) MIN.

PIN: .187 (4.75) ±.010 (.25)

(See Note 6)

TERMINAL LOCATIONS AND PIN NUMBERING (REF. ONLY)

(Viewed from Terminals)

.035 (.89)

±.010 (0.25)

.031 (.79)

±.003 (0.08)

36° ±3°

TYP.

.200 (5.08)

±.010 (.25) DIA.

OUTLINE DIMENSIONS

GENERAL NOTES

1. Relay contacts will exhibit no chatter in excess of 10 μsec or transfer in

excess of 1 μsec.

2. “Typical” characteristics are based on available data and are best estimates.

No on-going verification tests are performed.

3. Unless otherwise specified, parameters are initial values.

4. For reference only. Coil resistance not directly measurable at relay terminals

due to internal series semiconductor. 432DD and 432T only.

5. Unless otherwise specified, relays will be supplied with either gold-plated or

solder-coated leads.

6. The slash and characters appearing after the slash are not marked on the

relay.

7. Limit Base Emitter current to 15 mAdc.

8. Applicable to all coil voltages. See Base current to turn on.

9. Screened HI-REL versions available. Contact factory.

10.

432 432DD

432D 432T

Vcc Vr

Notes:

Logic 1 activates the relay.

Logic 0 de-activates the relay.

Vcc = logic bias power.

Vr = coil energization voltage.

Pin 10

Pin 9

Pin 1

Logic element

1 = 0.24 to 1.50mA

0 = 0.3Vdc min.

SCHEMATIC DIAGRAMS

TYPICAL LOGIC INTERFACE

(See Note 8)

Teledyne Part Numbering System for T2R

Established Reliability Relay

ER 432 Y M - 26 A / S Q

Established Reliability

Designator

Pad Option

(See Appendix)

Relay Series

Optional Ground Pin

(See Appendix)

Q= Solder Coated Leads

G= Gold Plated Leads

(Notes 5 and 6)

S= 0.187" leads

(Note 6)

Coil Voltage

Screening and Reliability

Level

Teledyne Part Numbering System for Military Qualified (JAN) Relays

J 432 Y M - 26 P L

Military (JAN)

Designator

Pad Option

(See Appendix)

Relay Series

Optional Ground Pin

(See Appendix)

Terminal Variant

P = 0.187"

Coil Voltage

Screening and Reliability

Level

SCHEMATICS ARE VIEWED

FROM TERMINALS

SERIES 432

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M4” Pad for TO-5

ER411T

ER412, ER412D, ER412DD .295 (7.49)

712, 712D, 712TN,

RF300, RF310, RF320 .300 (7.62)

ER420, ER422D, ER420DD, 421,

ER421D, ER421DD, ER422, ER422D,

ER422DD, 722, 722D, RF341

.305 (7.75)

ER431T, ER432T,

ER432, ER432D, ER432DD .400 (10.16)

732, 732D, 732TN, RF303, RF313,

RF323 .410 (10.41)

RF312 .350 (8.89)

“M4” Pad for TO-5

ER411, ER411D, ER411DD .295 (7.49)

ER431, ER431D, ER431DD .400 (10.16)

RF311 .300 (7.62)

RF331 .410 (10.41)

“M4” Pad for Centigrid®

172, 172D .305 (7.75)

ER114, ER114D, ER114DD,

J114, J114D, J114DD .300 (7.62)

ER134, ER134D, ER134DD,

J134, J134D, J134DD .400 (10.16)

RF100 .315 (8.00)

RF103 .420 (10.67)

“M9” Pad for Centigrid®

122C, A152 .320 (8.13)

ER116C, J116C .300 (7.62)

ER136C, J136C .400 (10.16)

RF180 .325 (8.25)

A150 .305 (7.75)

Notes:

1. Spacer pad material: Polyester  lm.

2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering

example in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speci ed, tolerance is ± .010 (.25).

5. Add 10 m to the contact resistance show in the datasheet.

6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

Ø.150

[3.81]

(REF)

Dim H

MAX

Dim H

MAX

Dim H

MAX

.156

[3.96]

(REF)

.256

[6.5]

(REF)

Dim H

MAX

Appendix A: Spacer Pads

Pad designation and

bottom view dimensions Height For use with the following: Dim. H

Max.

“M” Pad 5/ 6/

ER411T, J411T, ER412, ER412D

ER412DD, J412, J412D, J412DD

ER412T, J412T

.388 (9.86)

712, 712D, 712TN .393 (9.99)

ER431T, J431T, ER432, ER432D

ER432DD, J432, J432D, J432DD

ER432T, J432T

.493 (12.52)

732, 732D, 732TN .503 (12.78)

ER420, J420, ER420D, J420D

ER420DD, J420DD, ER421, J421

ER421D, J421D, ER421DD

J422D, ER422DD, J422DD, 722

.398 (10.11)

“M2” Pad 7/ 8/

ER411T

ER412, ER412D, ER412DD

J412, J412D, J412DD

.441 (11.20)

712, 712D .451 (11.46)

ER421, ER421D, ER421DD

722, 732D .451 (11.46)

ER431T

ER432, ER432D, ER432DD .546 (13.87)

732, 732D .556 (14.12)

“M3” Pad 5/ 6/ 9/

ER411, ER411D, ER411DD

ER411TX

ER412X, ER412DX, ER412DDX

ER412TX

.388 (9.86)

712X, 712DX, 712TNX .393 (9.99)

ER420X, ER420DX, ER420DDX

ER421X, ER421DX, ER421DDX

ER422X, ER422DX

ER422DDX, 722X, 722DDX

.398 (10.11)

ER431, ER431D, ER431DD

ER431TX

ER432X, ER432DX, ER432DDX

ER432TX

.493 (12.52)

732X, 732DX, 732TNX .503 (12.78)

Notes:

1. Spreader pad material: Diallyl Phthalate.

2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example

in the applicable datasheet.

3. Dimensions are in inches (mm).

4. Unless otherwise speci ed, tolerance is ± .010” (0.25).

5/. Add 25 m to the contact resistance shown in the datasheet.

6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.

7/. Add 50 m to the contact resistance shown in the datasheet.

8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.

9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

.390 [9.91]

.300

[7.62]

.100

[2.54]

.300

[7.62]

.100

[2.54] .150

[3.81]

.150

[3.81]

.130

[3.3]

Dim H

MAX

.370 [9.4]

MAX SQ

.150

[3.81]

.100

[2.54]

.200

[5.08]

.300

[7.62]

.100

[2.54]

Dim H

MAX

.370

[9.4]

MIN

.014

[0.36]

(REF)

Appendix A: Spreader Pads

.100

[2.54]

.100

[2.54]

.100

[2.54]

"Y" POSITION

"Z" POSITION

.100

[2.54]

.100

[2.54]

.100

[2.54]

"W" POSITION

"U" POSITION

(ER116C and ER136C only)

"X" POSITION

"Z" POSITION

"Y" POSITION

.050

[1.27]

36°±3°

Ø.200

[Ø5.08]

"Z" POSITION

"Y" POSITION

"X" POSITION

45°±3°

"Z" POSITION

"Y" POSITION

Ø.200

[Ø5.08]

Centigrid® Relays:

RF100, RF103, ER114, ER134, 172

Centigrid® Relays:

RF180, ER116C, 122C, ER136C

TO-5 Relays:

ER411T, ER412, ER412T, ER420, ER421, ER422,

ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,

400V, RF300, RF303, RF341, RF312, RF310, RF313,

RF320, RF323

TO-5 Relays:

ER411, ER431, RF311, RF331

NOTES

1. Terminal views shown

2. Dimensions are in inches (mm)

3. Tolerances: ± .010 (±.25) unless otherwise speci ed

4. Ground pin positions are within .015 (0.38) dia. of true position

5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.

6. Lead dia. 0.017 (0.43) nom.

Indicates ground pin position

Indicates glass insulated lead position

Indicates ground pin or lead position

depending on relay type

Appendix A: Ground Pin Positions