www.osram-os.com Produktdatenblatt | Version 1.1 SFH 4555 SFH 4555 Radial T1 3/4 High Power Infrared Emitter (850 nm) Applications ----Electronic Equipment ----Safety systems and CCTV ----Industrial Automation (Machine controls, Light barriers, Vision controls) ----Smoke Detectors Features: ----Package: black epoxy ----ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) ----High Power Infrared LED ----Short switching times Ordering Information Type Radiant intensity 1) IF=100mA; tp=20ms Ie SFH 4555 SFH 4555-CWDW 1 Version 1.4 | 2018-06-21 Radiant intensity1) typ. IF=100mA; tp=20ms Ie Ordering Code 160 ... 800 mW/sr 550 mW/sr Q65110A7341 250 ... 800 mW/sr 550 mW/sr Q65111A4744 SFH 4555 Maximum Ratings TA=25C Parameter Symbol Operating temperature Top min. max. -40 C 100 C Storage temperature Tstg min. max. -40 C 100 C Reverse voltage2) VR max. 12 V Forward current IF max. 100 mA Surge current tp100s; D=0 IFSM max. 1A Power consumption Ptot max. 180 mW ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) VESD max. 2 kV 2 Version 1.4 | 2018-06-21 Values SFH 4555 Characteristics IF=100mA; tp=20ms; TA=25C Parameter Symbol Peak wavelength peak typ. 860 nm Centroid wavelength centroid typ. 850 nm Spectral bandwidth at 50% Irel,max typ. 30 nm Half angle typ. 5 Dimensions of active chip area LxW typ. 0.3x0.3 mmxmm Rise time (10% / 90%) IF=100mA; RL=50 tr typ. 12 ns Fall time (10% / 90%) IF=100mA; RL=50 tf typ. 12 ns Forward voltage VF typ. max. 1.5 V 1.8 V Forward voltage IF=1A; tp=100s VF typ. max. 2.4 V 3V Reverse current2) VR=5V IR max. typ. 10 A 0.01 A Total radiant flux3) e typ. 60 mW Radiant intensity1) IF=1A; tp=25s Ie typ. 4400 mW/sr Temperature coefficient of brightness TCI typ. -0.5 % / K Temperature coefficient of voltage TCV typ. -0.7 mV / K TC typ. 0.3 nm / K RthJA max. 450 K / W Temperature coefficient of wavelength Thermal resistance junction ambient real 3 Version 1.4 | 2018-06-21 4) Values SFH 4555 Brightness Groups TA=25C Group Radiant intensity IF=100mA; tp=20ms min. Ie Radiant intensity IF=100mA; tp=20ms max. Ie BW 160 mW/sr 320 mW/sr CW 250 mW/sr 500 mW/sr DW 400 mW/sr 800 mW/sr Only one group in one packing unit (variation lower 2:1). Relative Spectral Emission 5), 6) Irel=f(); IF=100mA; tp=20ms OHF04132 100 I rel % 80 60 40 20 0 700 750 800 850 nm 950 4 Version 1.4 | 2018-06-21 SFH 4555 Radiation Characteristics Irel=f() 40 5), 6) 30 20 10 0 OHF03594 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 0.8 Forward current 0.6 0 20 OHL01713 100 A 60 80 100 120 5), 6) Ie/Ie(100mA)=f(IF); singlepulse; tp=25s OHL01715 101 Ie I e (100 mA) 10-1 5 100 5 10-2 10-1 5 5 10-3 10-2 5 5 10-4 40 Radiant Intensity 5), 6) IF=f(VF); single pulse; tp=100s IF 0.4 0 0.5 1 1.5 2 2.5 V 3 VF 5 Version 1.4 | 2018-06-21 10-3 0 10 5 10 1 5 10 2 mA 10 3 IF SFH 4555 Max. Permissible Forward Current Permissible Pulse Handling Capability IF,max=f(TA); RthJA=450 K / W IF=f(tp); dutycycle D=parameter; TA=25C OHR00880 125 IF F mA 1.2 A 1.0 100 75 0.6 50 0.4 25 0 20 40 60 80 C 100 T IF=f(tp); dutycycle D=parameter; TA=85C OHF05587 t D = TP 0.7 0.6 0.5 0.4 0.3 0.2 IF T 0.005 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 0.2 Permissible Pulse Handling Capability 0.9 A IF 0.8 t D = TP D= 0.8 0 OHF05438 tP tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 6 Version 1.4 | 2018-06-21 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp SFH 4555 Dimensional Drawing 7) Approximate Weight: 298.0 mg Package marking: Cathode 7 Version 1.4 | 2018-06-21 SFH 4555 Recommended Solder Pad Pad 1: cathode 8 Version 1.4 | 2018-06-21 7) SFH 4555 TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave C T 250 235 C - 260 C First wave Second wave Continuous line: typical process Dotted line: process limits T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 C 120 C 100 C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 9 Version 1.4 | 2018-06-21 SFH 4555 Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the LED specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Packing information is available on the internet (online product catalog). For further application related informations please visit www.osram-os.com/appnotes 10 Version 1.4 | 2018-06-21 SFH 4555 Disclaimer Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the OSRAM OS Webside. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Product safety devices/applications or medical devices/applications OSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. In case Buyer - or Customer supplied by Buyer- considers using OSRAM OS components in product safety devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordinate the customer-specific request between OSRAM OS and Buyer and/or Customer. 11 Version 1.4 | 2018-06-21 SFH 4555 Glossary 1) Radiant intensity:Measured at a solid angle of = 0.001 sr 2) Reverse Operation:Reverse Operation of 10 hours is permissible in total. Continuous reverse operation is not allowed. 3) Total radiant flux:Measured with integrating sphere. 4) Thermal resistance:junction ambient, mounted on PCboard (FR4), padsize 16 mm each 5) Typical Values:Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Testing temperature:TA = 25C 7) Tolerance of Measure:Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 12 Version 1.4 | 2018-06-21 SFH 4555 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 13 Version 1.4 | 2018-06-21