https://www.phoenixcontact.com/us/products/1413612
04/24/2014Page2/4
Network cable-VS-PPC/PL-PPC/PL-94C-LI/10,0-1413612
Technical data
Characteristics head 2
Head type Plug Straight RJ45 Push Pull / IP67
No. of positions (pin connector pattern) 8
Material (component) Plastic
Cable
Cable type Ethernet
Cable type (abbreviation) 94C
Signal type/category Ethernet CAT5 (IEC 11801:2002)
Ethernet CAT5e (TIA 568B:2001)
Cable structure 4x2xAWG26/19; S-UTP
Conductor cross section 4x 2x 0.16 mm²
AWG signal line 26
Conductor structure signal line 19x 0.10 mm
Core diameter including insulation max. 1 mm
Wire colors White-blue, white-orange, white-green, white-brown
Twisted pairs 2 cores to the pair
Overall twist 4 pairs for core
Shielding Tinned copper braided shield
External sheath, color water blue RAL 5021
External cable diameter D 7.7 mm
Smallest bending radius, fixed installation 39 mm (cable, fixed installation)
Smallest bending radius, movable installation 39 mm (cable, flexible installation)
Number of bending cycles 5000000
Bending radius 57.8 mm
Traversing path 1.8 m
Traversing rate 3 m/s
Acceleration 9 m/s²
Cable weight 70 kg/km
Outer sheath, material PUR
Material, inner sheath Elastomer
Material conductor insulation Teflon
Conductor material Bare Cu litz wires
Insulation resistance min. 0.5 GΩ*km
Conductor resistance max. 125000000 Ω/km
Working capacitance 57 nF
Wave impedance 100 Ω ±5 Ω (at 100 MHz)
Nominal voltage, cable 125 V
Test voltage Core/Core 1000 V