SYNC-10.00MHz.
STANDARD SPECIFICATIONS:
FEATURES: APPLICATIONS:
Pb
RoHS
Compliant
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 10.02.11
Visit
www.abracon.com
for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Sync'n Go -- Portable Precision Frequency Reference
PACKAGE OUTLINE
Parameter Description Value / Units
zHM 00.01 cnyS rof ycneuqerF ecnerefeR tupnI zHM 00.01 ycneuqerF ecnerefeR tuptuO Cº06+ ot Cº0 egnaR gnitarepO elbarepO bpp 00.5± ycarucca noitazinorhcnyS
Frequency Drift post sync
(25ºC ± 10ºC) ±25.00 ppb Typical
Frequency Drift post sync
(25ºC ± 20ºC) ±50.00 ppb Typical
Frequency Accuracy Over the
operating Temperature Range < ±100
±300 ppb Typical; Post Sync
ppb Maximum; Post Sync
Load Impedance 50 Ω
Charging Time 4.00 Hours maximum
Stand Alone operational time with
full charge 10.00 Hours minimum
Phase Noise @ 10.00MHz Carrier
100 Hz offset
1,000 Hz offset
10,000 Hz offset
100,000 Hz offset
1,000,000 Hz offset
-120
-140
-150
-155
-155
dBc/Hz typical
dBc/Hz typical
dBc/Hz typical
dBc/Hz typical
dBc/Hz typical
muminim mBd 0.6 edutilpma tuptuO mumixam cBd 03- scinomraH LLA rms jitter <0.50 ps 12kHz to 20MHz BW from the carrier
• Stand Alone 10.00MHz Portable Precision Frequency Reference
- World Wide Capability
• Built-in Stratum-III stability, 10.00MHz Signal tuned into 50Ω's • Synchronization
circuitry providing dynamic sync capability, enabling Calibration to a known
source such as; a GPS Tracked 10.00MHz reference/10.00MHz Rubidium
Source/10.00MHz OCXO based reference
• Integrated re-chargeable batteries to provide true stand-alone capability in the field
• Once sync'd; guaranteed ±300 ppb stability over 0ºC to 60ºC
• Pocket Size - 3.50" * 1.50" * 1.00"; machined aluminum durable enclosure
• Accompanied with a Universal AC-DC Charger
• Continuously operable at full charge for 10-hours
• Ideally suited as an in-field Calibrated Precision 10.00MHz reference
for trouble shooting or tuning hardware and Base Station related
equipment
• Reference source for lab use
• Reference source to drive frequency counters and other timing related
hardware or instruments
• Precision Portable reference for inspection of in-field wireless
transmitters
®
SYNC-10.00MHz.
Pb
RoHS
Compliant
30332
ainrofilaC,a tiragraMa tnaSoh cnaR ,aznar epsE
92688
tel 949-546-8000 | fax 949-546-8001 ba. w ww | r mo c.no ca
Revised: 10.02.11
Visit
www.abracon.com
for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
OPERATIONAL MANUAL
Charge:
1) Plug 5V charger (or PC or any other USB power source) into a mini-USB port
2) "Bat" LED may turn yellow for a moment to signal that an internal battery is evaluated
3) "Bat" LED will flash green to signal that the battery is being charged
4) "Bat" LED will display solid green when the battery is fully charged
Synchronization:
1) Connect a 10MHz standard to the "Ref In" input
2) Press "Synchronize"
3) "Lock" LED will turn-on yellow to signal that "Sync N Go" is evaluating the standard
4) If the reference is stable, the "Lock" LED will turn green to signal that the signal is
locked and that the reference information is stored
5) If the reference is not found or it is outside a frequency range or it is not stable, the
"Lock" LED will flash red
6) If that occurs, the "Lock" LED turns-off and the "Sync N Go" goes into a sleep mode
Output ON (if battery charged):
1) Press "Power"
2) "ON" LED will turn green
3) "Sync N Go" will output a continuous RF signal on the "Out" connector
Output ON (if battery low):
1) Press "Power"
2) "ON" LED will turn green.
3) "Sync N Go" will output a continuous RF signal on the "Out" connector. At the same
time, "Bat" LED will slowly flash red.
Output ON (if battery is discharged):
1) Press "Power"
2) "Bat" LED will rapidly flash red for few seconds and "Sync N Go" will immediately go
back to sleep
Output OFF:
1) Press "Power"
2) "ON" LED turns off and the "Sync N Go" goes into a sleep mode
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
Sync'n Go -- Portable Precision Frequency Reference
®
Designed & Manufactured in United States
For technical assistance, please contact: techsupport@abracon.com
