AC Film Capacitors B 32330/32
Motor run
Issue No. 1
08/02
Page 1 of 5
Construction
n Dielectric: polypropylene film
n Aluminum can
n Soft polyurethane resin
Features
n Self-healing properties
n Low dissipation factor
n Overpressure disconnection device
n High insulation resistance
Typical applications
For general sine wave applications,
mainly as motor run capacitor
Terminals
n Single (B32330 series) or
Double (B32332 series) fast on 6,3 x 0,8 mm
Mounting parts
n Metal stud (max. torque = 5 Nm)
Technical data and specifications
Standard IEC 60252 / EM 60252
Rated capacitance CNAccording to dimensions table
Tolerance ± 5%, ± 6%, ±10%
Rated voltage UNAccording to dimensions table
Rated frequency fN50...60Hz
Life expectance 10.000 h (class B)
Maximum ratings
Maximum permissible voltage Umax 1,1 x Un(Un= Rated voltage)
Maximum permissible current Imax 1,3 x In(In = Rated current)
Test data
AC test voltage terminal to terminal UTT 2 x Un , 60s. (type test)
Insulation voltage terminals to case 2000 Vac, 60s. (type test)
Insulation resistance Ris or time constant τ at 20 °C 3000 s
Rel. Humidity ≤ 65 °C (minimum value)
Dissipation factor tanδ at 20 °C ≤ 1,0 x10-3 (120 Hz)
Maximum rate of voltage rise du/dtmax 10 V/µs
AC Film Capacitors B 32330/32
Motor run
Issue No. 1
08/02
Page 2 of 5
Technical data (cont`d)
Climatic data
Climatic category 25/085/21 according to IEC 60068-1
Lower category Tmin -25 °C
Upper category Tmax +85 °C
Damp heat test ttest 21 days
Permitted capacitance ∆C/C ≤ 3 %
Approved marks
UL 810 EN 60252*
10000 AFC
* VDE approval for 400 and 450V series.
Note :
1) It should be noted that presence of harmonics produces over voltage & over current on capacitors.
Resonance may cause serious damage to installation if a significant level of total harmonic distortion level
exists for voltage or current. In such cases, series reactors must be considered.
2) Operating temperature class: in accordance with the reference standards, these temperatures are those
measured on the surface on the capacitor.
AC Film Capacitors B 32330/32
Motor run
Issue No. 1
08/02
Page 3 of 5
Dimensional drawings
B32332 ... 07X Series B32330 ... 05X Series
AC Film Capacitors B 32330/32
Motor run
Issue No. 1
08/02
Page 4 of 5
Ordering codes and packing units
UN
[Vac] CN
[µF]
Max. dimensions
d x l [mm] Ordering code
B3233* Packing units
250 4 30 x 68 -B1405-+0** 112
530 x 68 -B1505-+0** 112
630 x 68 -B1605-+0** 112
730 x 68 -B1705-+0** 112
830 x 68 -B1805-+0** 112
10 30 x 68 -B1106-+0** 112
12 30 x 68 -B1126-+0** 112
15 35 x 68 -B1156-+0** 84
20 35 x 68 -B1206-+0** 84
25 35 x 78 -B1256-+0** 84
30 40 x 78 -B1306-+0** 45
35 40 x 78 -B1356-+0** 45
40 40 x 78 -B1406-+0** 45
45 40 x 78 -B1456-+0** 45
50 40 x 103 -B1506-+0** 45
55 40 x 103 -B1556-+0** 45
60 40 x 103 -B1606-+0** 45
400 4 30 x 68 B4405-+0** 112
530 x 68 -B4505-+0** 112
630 x 68 -B4605-+0** 112
730 x 78 -B4705-+0** 112
830 x 78 -B4805-+0** 112
10 30 x 78 -B4106-+0** 112
12 35 x 78 -B4126-+0** 84
15 40 x 78 -B4156-+0** 45
20 40 x 78 -B4206-+0** 45
25 40 x 103 -B4256-+0** 45
30 40 x 103 -B4306-+0** 45
AC Film Capacitors B 32330/32
Motor run
Issue No. 1
08/02
Page 5 of 5
UN
[Vac] CN
[µF]
Max. Dimensions
d x l [mm] Ordering code
B3233* Packing units
400 (cont.) 35 45 x 103 -B4356-+0** 45
40 50 x 103 -B4406-+0** 32
45 50 x 103 -B4456-+0** 32
50 53 x 103 -B4506-+0** 32
60 53 x 130 -B4606-+0** 32
450 3 30 x 68 -B6305-+0** 112
430 X 68 -B6405-+0** 112
530 x 78 -B6505-+0** 112
630 x 78 -B6605-+0** 112
730 x 78 B6705-+0** 112
835 x 78 -B6805-+0** 84
10 40 x 78 -B6106-+0** 45
12 40 x 78 -B6126-+0** 45
15 40 x 103 -B6156-+0** 45
20 40 x 103 -B6206-+0** 45
25 45 x 103 -B6256-+0** 45
30 50 x 103 -B6306-+0** 32
35 50 x 103 -B6356-+0** 32
40 53 x 103 -B6406-+0** 32
45 53 x 140 -B6456-+0** 32
50 53 x 140 -B6506-+0** 32
55 63.5 x 140 -B6556-+0** 28
60 63.5 x 140 -B6606-+0** 28
Notes for ordering code:
1. Replace * by : 0 - single tab fast-on.
2 - double tab fast-on.
2. For capacitance tolerance replace + by : J - ±5%, E - ±6%, K - ±10%
3. Replace ** by : 50 - aluminum can
70 - aluminum can with
M 8 fixing threaded bolt for ≤ φ 53mm.
M 12 fixing threaded bolt for φ 63.5mm.
EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto
and the information contained therein without EPCOS' prior express consent is prohibited.
The information contained in this data sheet describes the type of component and shall not be considered as guaranteed
characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the
Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers'
Association), unless otherwise agreed.
