To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
www.onsemi.com
April 20 17
© 2017 Semiconductor Components Industries, LLC 1
S1AFL - S1MFL ’Rev. 1.2 www.fairchildsemi.com
S1AFL - S1MFL — Surface General-Purpose Rectifier
S1AFL - S1MFL
Surface General-Purpose Rectifier
Features
• Ultra Thin Profile – Maximum Height of 1.08 mm
• UL Flammability 94V-0 Classification
• Glass Passivated Junction
•MSL 1
• RoHS Compliant / Green Mold Compound
• Industrial Device Qualified per AEC-Q101 Standards.
* see authorized use policy
Ordering Information
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the re co mmen ded operating conditions and s tres si ng the parts to these level s i s not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Note:
1. Pulse test: 300 μs pulse width, 1% duty cycle
Part Number Top Mark Package Packing Method
S1AFL 1A SOD-123F Tape and Reel
S1BFL 1B SOD-123F Tape and Reel
S1DFL 1D SOD-123F Tape and Reel
S1GFL 1G SOD-123F Tape and Reel
S1JFL 1J SOD-123F Tape and Reel
S1MFL 1M SOD-123F Tape and Reel
Symbol Parameter Value Unit
S1AFL S1BFL S1DFL S1GFL S1JFL S1MFL
VRRM Recurrent Peak Reverse Voltage 50 100 200 400 600 1000 V
VRMS RMS Voltage 35 70 140 280 420 700 V
VDC DC Blocking Voltage 50 100 200 400 600 1000 V
IF(AV) Average Forward Current(1) 1A
IFSM Peak One Cycle Surge Forward Current
(Non-Repetitive) at 60Hz 30 A
TJ, TSTG Operating and Storage Temperature Range -50 to +150 °C
1 2
Cathode
Anode
SOD-123F
Band Indicates Cathode
© 2017 Semiconductor Components Industries, LLC 2
S1AFL - S1MFL — Surface General-Purpose Rectifier
Thermal Characteristics(2)
Values are at TA = 25°C unless otherwise noted.
Note:
2. Per JESD51-3 recommended thermal test board . Device mounted on FR-4 PCB, board size = 76.2 mm x 114.3 mm.
3. Thermocouple soldered at cathode lead.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Symbol Parameter Value Unit
ψJL Typical Thermal Characteristics, Junction-to-Lead(3) 25 °C/W
RθJA Ty pical Thermal Resistance, Junction-to-Ambient 140 °C/W
Symbol Parameter Conditions Min. Typ. Max. Unit
VFForward Voltage IF = 1 A 1.1 V
IRReverse Current VR = VDC TA = 25°C 1 μA
TA = 125°C 50
Trr Reverse Recovery Time IF = 0.5 A, IR = 1 A, Irr = 0.25 A 1.304 2 μs
CJJunction Capacitance VR = 4 V, f = 1.0 MHz 4 pF
S1AFL - S1MFL ’Rev. 1.2 www.fairchildsemi.com
www.onsemi.com
© 2017 Semiconductor Components Industries, LLC 3
S1AFL - S1MFL — Surface General-Purpose Rectifier
Typical Performance Characteristics
Figure 1. Forward Current Derating Curve Figure 2. Typical Instantaneous Forward
Characteristics
Figure 3. Typical Reverse Characteristic Figure 4. Typical Junction Capacitance
Figure 5. Maximum Non-Repetitive Surge Current Figure 6. Typical Forward Characteristics
1E-3
0.01
0.1
1
10
0.2 0.4 0.6 0.8 1.0 1.2
TA= 150oC
TA= 125oC
TA= 100oC
TA= 25oC
TA= 75oC
Forward Vo ltage, V F [V]
Forward Current, IF [A]
S1AFL - S1MFL ’Rev. 1.2 www.fairchildsemi.com
www.onsemi.com
0 25 50 75 100 125 150 175
0
1
2
Average Rectified Forward Current, IF [A]
Lead Temperature, [OC]
© 2017 Semiconductor Components Industries, LLC 4
S1AFL - S1MFL — Surface General-Purpose Rectifier
Physical Dimensions
Figure 7. 2-LEAD, SOD123F, NON-JEDEC, FLAT TERMINAL
$
$
127(6
$7+,63$&.$*('2(6127&21)25072
$1<67$1'$5'6
%$//',0(16,216$5(,10,//,0(7(56
&',0(16,216$5((;&/86,9(2)%8556
02/')/$6+$1'7,(%$53527586,216
''5$:,1*),/(1$0(0$%5(9
/$1'3$77(515(&200(1'$7,21
S1AFL - S1MFL ’Rev. 1.2 www.fairchildsemi.com
www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
