HCPL-817
Phototransistor Optocoupler High Density Mounting Type
Data Sheet
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Features
•Current Transfer Ratio
(CTR: min. 50% at IF = 5 mA, VCE = 5 V)
•High input-output isolation voltage (Viso = 5000 Vrms)
•Response time
(tr: typ., 4 μs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)
•Compact dual-in-line package
•UL approved
•CSA approved
•IEC/EN/DIN EN 60747-5-2 approved
•Options available:
– Leads with 0.4" (10.16 mm) spacing (W00)
– Leads bends for surface mounting (300)
– Tape and reel for SMD (500)
– IEC/EN/DIN EN 60747-5-2 approvals (060)
Applications
• Signal transmission between circuits of different
potentials and impedances
• I/O interfaces for computers
• Feedback circuit in power supply
Description
The HCPL-817 contains a light emitting diode optically
coupled to a phototransistor. It is packaged in a 4-pin DIP
package and available in wide-lead spacing option and
lead bend SMD option. Input-output isolation voltage is
5000 Vrms. Response time, tr, is typically 4 μs and minimum
CTR is 50% at input current of 5 mA.
Schematic
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Functional Diagram
1
2
ANODE
CATHODE
VF
+
–
IF4
3
COLLECTOR
EMITTER
IC
4 3
12
PIN NO. AND INTERNAL
CONNECTION DIAGRAM
1. ANODE
2. CATHODE
3. EMITTER
4. COLLECTOR
2
Ordering Information
HCPL-817-xxxx is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component
Acceptance Notice #5, File CA 88324.
Part
number
RoHS Compliant Option
Package
Surface
Mount
Gull
Wing
Tape
& Reel
IEC/EN/
DIN EN
60747-
5-2 Quantity
Rank
‘0’
50%
<CTR<
600%
Rank
‘A’
80%
<CTR<
160%
Rank
‘B’
130%
<CTR<
260%
Rank
‘C’
200%
<CTR<
400%
Rank
‘D’
300%
<CTR<
600%
Rank
‘L’
50%
<CTR<
100%
HCPL-
817
-000E -00AE -00BE -00CE -00DE -00LE
300mil
DIP-4
100 pcs
per tube
-300E -30AE -30BE -30CE -30DE -30LE X X 100 pcs
per tube
-500E -50AE -50BE -50CE -50DE -50LE X X X 1000 pcs
per reel
-060E -06AE -06BE -06CE -06DE -06LE X 100 pcs
per tube
-360E -36AE -36BE -36CE -36DE -36LE X X X 100 pcs
per tube
-560E -56AE -56BE -56CE -56DE -56LE XXXX1000 pcs
per reel
-W00E -W0AE -W0BE -W0CE -W0DE -W0LE
400mil
DIP-4
100 pcs
per tube
-W60E -W6AE -W6BE -W6CE -W6DE -W6LE X 100 pcs
per tube
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-817-360E to order product of 300mil DIP-4 DC Gull Wing Surface Mount package in Tube packaging with
50%<CTR<600%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-817-50BE to order product of 300mil DIP-4 DC Gull Wing Surface Mount package in Tape and Reel packaging
with 130%<CTR<260% and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
3
Package Outline Drawings
HCPL-817-000E
HCPL-817-W00E
HCPL-817-060E
6.5 ± 0.5
(0.256)
Dimensions in Millimeters and (Inches)
4.6 ± 0.5
(0.181)
2.54 ± 0.25
(0.1)
3.5 ± 0.5
(0.138)
7.62 ± 0.3
(0.3)
0.26
(0.010)
7.62 ~ 9.98
2.8 ± 0.5
(0.110)
3.3 ± 0.5
(0.130)
0.5 ± 0.1
(0.02)
0.5
(0.02)TYP.
A 817
YWW
DATE CODE
RANK
LEAD FREE
ANODE
6.5 ± 0.5
(0.256)
Dimensions in Millimeters and (Inches)
4.6 ± 0.5
(0.181)
2.54 ± 0.25
(0.1)
3.5 ± 0.5
(0.138)
7.62 ± 0.3
(0.3)
0.26
(0.010)
7.62 ~ 9.98
2.8 ± 0.5
(0.110)
3.3 ± 0.5
(0.130)
0.5 ± 0.1
(0.02)
0.5
(0.02)TYP.
A 817V
YWW
DATE CODE
RANK
LEAD FREE
ANODE
6.5 ± 0.5
(0.256)
Dimensions in Millimeters and (Inches)
4.6 ± 0.5
(0.181)
2.54 ± 0.25
(0.1)
3.5 ± 0.5
(0.138)
6.9 ± 0.5
(0.272)
7.62 ± 0.3
(0.3)
0.26
(0.010)
10.16 ± 0.5
(0.4)
2.8 ± 0.5
(0.110)
2.3 ± 0.5
(0.09)
0.5 ± 0.1
(0.02)
A 817
YWW
DATE CODE
RANK
LEAD FREE
ANODE
4
HCPL-817-300E
Absolute Maximum Ratings (TA = 25°C)
Storage Temperature, TS–55°C to +125°C
Operating Temperature, TA–30°C to +100°C
Lead Solder Temperature, max.
(1.6 mm below seating plane)
260°C for 10 s
Average Forward Current, IF 50 mA
Reverse Input Voltage, VR 6 V
Input Power Dissipation, PI 70 mW
Collector Current, IC 50 mA
Collector-Emitter Voltage, VCEO 70 V
Emitter-Collector Voltage, VECO 6 V
Collector Power Dissipation 150 mW
Total Power Dissipation 200 mW
Isolation Voltage, Viso (AC for 1 minute, R.H. = 40 ~ 60%) 5000 Vrms
Note: Non-halide flux should be used.
1. One-time soldering reflow is recommended within the
condition of temperature and time profile shown.
2. When using another soldering method such as infrared
ray lamp, the temperature may rise partially in the mold
of thedevice. Keep the temperature on the package of
the device within the condition of (1) above.
6.5 ± 0.5
(0.256)
Dimensions in Millimeters and (Inches)
4.6 ± 0.5
(0.181)
2.54 ± 0.25
(0.1)
3.5 ± 0.5
(0.138)
7.62 ± 0.3
(0.3)
0.26
(0.010)
10.16 ± 0.3
(0.4)
1.2 ± 0.1
(0.047) 0.35 ± 0.25
(0.014)
1.0 ± 0.25
(0.039)
A 817
YWW
DATE CODE
RANK
LEAD FREE
ANODE
Solder Reflow Temperature Profile
30 seconds
60 ~ 150 sec 90 sec 60 sec
60 sec
25°C
150°C
200°C
250°C 260°C (Peak Temperature)
217°C
Time (sec)
Temperature (°C)
5
Figure 1. Forward current vs. temperature. Figure 2. Collector power dissipation vs. temperature.
Figure 3. Collector-emitter saturation voltage vs. forward current.
* CTR = x 100%
IC
IF
Electrical Specifications (TA = 25°C)
Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage VF– 1.2 1.4 V IF = 20 mA
Reverse Current IR––10
μAVR = 4 V
Terminal Capacitance Ct– 30 250 pF V = 0, f = 1 KHz
Collector Dark Current ICEO – – 100 nA VCE = 20 V
Collector-Emitter Breakdown Voltage BVCEO 70––VI
C = 0.1 mA
Emitter-Collector Breakdown Voltage BVECO 6––V
IE = 10 μA
Collector Current IC2.5 – 30 mA IF = 5 mA, VCE = 5 V,
RBE = ∞
*Current Transfer Ratio CTR 50 – 600 %
Collector-Emitter Saturation Voltage VCE(sat) – 0.1 0.2 V IF = 20 mA, IC = 1 mA
Response Time (Rise) tr–418
μsVCE = 2 V, IC = 2 mA
RL = 100 Ω
Response Time (Fall) tf–318
μs
Cut-off Frequency fc–80–KHzV
CC = 5 V, IC = 2 mA
RL = 100 Ω, –3 dB
Isolation Resistance Riso 5 x 1010 1 x 1011 –ΩDC 500 V
40 ~ 60% R.H.
Floating Capacitance Cf– 0.6 1.0 pF V = 0, f = 1 MHz
IF – FORWARD CURRENT – mA
0
TA – AMBIENT TEMPERATURE – °C
50
10
40
75 125250 50 100-30
60
30
20
PC – COLLECTOR POWER DISSIPATION – mW
0
TA – AMBIENT TEMPERATURE – °C
100
50
200
150
75 125250 50 100-30
0
IF – FORWARD CURRENT – mA
2
10 1550
1
3
4
5
6
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
TA = 25°C
IC = 0.5 mA
IC = 1 mA
IC = 3 mA
IC = 5 mA
IC = 7 mA
6
Figure 4. Forward current vs. forward voltage. Figure 5. Current transfer ratio vs. forward current.
Figure 6. Collector current vs. collector-emitter voltage. Figure 7. Relative current transfer ratio vs. temperature.
Figure 8. Collector-emitter saturation voltage vs. temperature. Figure 9. Collector dark current vs. temperature.
IF – FORWARD CURRENT – mA
1
VF – FORWARD VOLTAGE – V
2.0 3.0
10
5
500
1.00 0.5 1.5 2.5
2
20
50
100
200
TA = 25°C
TA = 0°C
TA = -25°C
0
IF – FORWARD CURRENT – mA
40
200
20
60
120
140
160
CTR – CURRENT TRANSFER RATIO – %
VCE = 5 V
TA = 25°C
80
100
180
10 5021520
IC – COLLECTOR CURRENT – mA
0
VCE – COLLECTOR-EMITTER VOLTAGE – V
40
20
50
IF = 30 mA
IF = 25 mA
30
10
IF = 20 mA
IF = 15 mA
693012 45 78
RELATIVE CURRENT TRANSFER RATIO – %
0
100
50
150
VCE = 5 V
IF = 5 mA
TA – AMBIENT TEMPERATURE – °C
75250 50 100-30
VCE(SAT.) – COLLECTOR-EMITTER
SATURATION VOLTAGE – V
0
0.10
0.02
0.16
IC = 1 mA
IF = 20 mA
TA – AMBIENT TEMPERATURE – °C
75250 50 100-25
0.04
0.06
0.08
0.12
0.14
ICEO – COLLECTOR DARK CURRENT – A
TA – AMBIENT TEMPERATURE – °C
VCE = 20 V
10-11
10-10
10-9
10-8
10-7
10-6
75250 50 100-25
10-5
PC (MAX.)
TA = 25°C
IF = 10 mA
IF = 5 mA
TA = 75°C
TA = 50°C
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved. Obsoletes AV01-0534EN
AV02-0265N - November 5, 2009
Test Circuit for Response Time Test Circuit for Frequency Response
Figure 10. Response time vs. load resistance. Figure 11. Frequency response.
RESPONSE TIME – μs
0.1
RL – LOAD RESISTANCE – kW
1
0.2
0.5
500
2
VCE = 2 V
IC = 2 mA
TA = 25°C
tf
tr
0.1 50.50.2 2 100.05 1
5
10
20
50
100
200
ts
td
VOLTAGE GAIN AV – dB
f – FREQUENCY – kHz
-20
-10
0
1 20 5005210500.5 100 200
RL = 10 kΩ
RL = 1 kΩ
RL = 100 Ω
VCE = 2 V
IC = 2 mA
TA = 25°C
VCC
RD
INPUT
RL
OUTPUT
INPUT
OUTPUT 10%
90%
td
trtf
ts
VCC
RD
RL
OUTPUT
~
