HLMP-152002 - Avago Technologies

Selection Guide

Minimum

Part Intensity

Number (mcd) at Color

HLMP- Description 10 mA (Material)

1340-G0000 Untinted 8.6 High Efficiency Red

Nondiffused (GaAsP on GaP)

1321 Tinted 8.6

Nondiffused

1420 Untinted 9.2 Yellow

Nondiffused (GaAsP on GaP)

1421 Tinted 9.2

Nondiffused

1520 Untinted 6.7 Green (GaP)

Nondiffused

1521 Tinted 6.7

Nondiffused

T-1 (3 mm) High Intensity

LED Lamps

Technical Data

Features

• High Intensity

• Choice of 3 Bright Colors

High Efficiency Red

Yellow

High Performance Green

• Popular T-1 Diameter

Package

• Selected Minimum

Intensities

• Narrow Viewing Angle

• General Purpose Leads

• Reliable and Rugged

• Available on Tape and Reel

Description

This family of T-1 lamps is

specially designed for applica-

tions requiring higher on-axis

intensity than is achievable with a

standard lamp. The light

generated is focused to a narrow

beam to achieve this effect.

HLMP-1340-G0000

HLMP-1321

HLMP-142x Series

HLMP-152x Series

Package Dimensions

Absolute Maximum Ratings at TA = 25°C

Parameter Red Yellow Green Units

Peak Forward Current 90 60 90 mA

Average Forward Current[1] 25 20 25 mA

DC Current[2] 30 20 30 mA

Power Dissipation[3] 135 85 135 mW

Reverse Voltage (IR = 100 µA) 5 5 5 V

Transient Forward Current[4] 500 500 500 mA

(10 µsec Pulse)

LED Junction Temperature 110 110 110 °C

Operating Temperature Range -55 to +100 -55 to +100 -20 to +100 °C

Storage Temperature Range -55 to +100

Lead Soldering Temperature 260°C for 5 seconds

[1.6 mm (0.063 in.) from body]

Notes:

1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.

2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.

3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at

1.6 mW/°C.

4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED

die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the

Absolute Maximum Ratings.

Electrical Characteristics at TA = 25°C

Device Test

Symbol Description HLMP- Min. Typ. Max. Units Conditions

IVLuminous Intensity 1340-G0000 8.6 30 mcd IF = 10 mA

1321 8.6 30 (Figure 3)

1420 9.2 15 mcd IF = 10 mA

1421 9.2 15 (Figure 8)

1520 6.7 22 mcd IF = 10 mA

1521 6.7 22 (Figure 3)

2θ1/2Including Angle Between All 45 Deg. IF = 10 mA

Half Luminous Intensity See Note 1

Points (Figures 6, 11, 16, 21)

λPEAK Peak Wavelength 1340-G0000 635 nm Measurement

1321-G0000 at Peak (Figure 1)

142X 583

152X 565

∆λ1/2 Spectral Line Halfwidth 1340-G0000 40 nm

1321-G0000

142X 36

152X 28

λdDominant Wavelength 1340-G0000 626 nm See Note 2

1321-G0000 (Figure 1)

142X 585

152X 569

τsSpeed of Response 1340-G0000 90 ns

1321-G0000

142X 90

152X 500

C Capacitance 1340-G0000 11 pF VF = 0; f = 1 MHz

1321-G0000

142X 15

152X 18

RθJ-PIN Thermal Resistance All 290 °C/W Junction to

Cathode Lead

VFForward Voltage 1340-G0000 1.9 2.4 V IF = 10 mA

1321-G0000

142X 2.0 2.4

152X 2.1 2.7

VRReverse Breakdown All 5.0 V IR = 100 µA

Voltage

ηVLuminous Efficacy 1340-G0000 145 lumens See Note 3

1321-G0000

142X 500 Watt

152X 595

Notes:

1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the

color of the device.

3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = lv/ηv, where lv is the luminous intensity in candelas and

ηv is the luminous efficacy in lumens/watt.

Figure 3. Relative Luminous Intensity

vs. DC Forward Current.

Figure 2. Forward Current vs.

Forward Voltage Characteristics. Figure 4. Relative Efficiency

(Luminous Intensity per Unit Current)

vs. Peak LED Current.

Figure 5. Maximum Tolerable Peak

Current vs. Pulse Duration. (IDC MAX

as per MAX Ratings).

Figure 6. Relative Luminous Intensity vs. Angular Displacement.

Figure 1. Relative Intensity vs. Wavelength.

T-1 High Efficiency Red Non-Diffused

T-1 Yellow Non-Diffused

Figure 10. Maximum Tolerable Peak

Current vs. Pulse Duration. (IDCMAX

as per MAX Ratings).

Figure 11. Relative Luminous Intensity vs. Angular Displacement.

Figure 8. Relative Luminous Intensity

vs. Forward Current.

Figure 7. Forward Current vs.

Forward Voltage Characteristics. Figure 9. Relative Efficiency

(Luminous Intensity per Unit Current)

vs. Peak Current.

T-1 Green Non-Diffused

Figure 13. Relative Luminous

Intensity vs. Forward Current.

Figure 12. Forward Current vs.

Forward Voltage Characteristics. Figure 14. Relative Efficiency

(Luminous Intensity per Unit Current)

vs. Peak LED Current.

Figure 15. Maximum Tolerable Peak

Current vs. Pulse Duration. (IDCMAX as

per MAX Ratings).

Figure 16. Relative Luminous Intensity vs. Angular Displacement.

www.semiconductor.agilent.com

Data subject to change.

November 30, 1999

Obsoletes 5964-9373E (4/96)

5968-4163E

Tape and Reel Options for T-13/4

(5 mm), T-1 (3 mm), LED Lamps

Technical Data

Features

• Compatible with Radial Lead

Automatic Insertion

Equipment

• Meets Dimensional Specifi-

cations of IEC Publication

286 and ANSI/EIA Standard

RS-468 for Tape and Reel

• Reel Packaging Simplifies

Handling and Testing

• T-1 and T-1 3/4 LED Lamps

Available Packaged on Tape

and Reel

• 5 mm (0.197 inch) Formed

Lead and 2.54 mm (0.100

inch) Straight Lead Spacing

Available

Description

T-1 and T-13/4 LED lamps are

available on tape and reel as

specified by the IEC Publication

286 and ANSI/EIA Standard

RS-468. The Option 01 lamp

devices have formed leads with

5 mm (0.197 inch) spacing for

automatic insertion into PC

boards by radial lead insertion

equipment. The Option 02 lamp

devices have straight leads with

2.54 mm (0.100 inch) spacing,

packaged on tape and reel for

ease of handling. T-1 lamps are

packaged 1800/reel. T-13/4 lamps

are packaged 1300/reel.

Ordering Information

To order LED lamps packaged on

tape and reel, include the

appropriate option code along

with the device catalog part

number. Example: to order the

HLMP-3300 on tape and reel with

formed leads (5 mm lead spacing)

order as follows: HLMP-3300

Option 01. Minimum order

quantities vary by part number.

Orders must be placed in reel

increments. Please contact your

local Agilent sales office or

franchised Agilent distributor for

a complete list of lamps available

on tape and reel.

LED lamps with 0.46 mm (0.018

inch) square leads with 5 mm

(0.197 inch) lead spacing are

recommended for use with

automatic insertion equipment.

Option 01

Option 02

Package Quantity/Reel Order Increments

T-1 1800 1800

T-13/41300 1300

Device Selection Guide

Option Description

01 Tape and reel, 5 mm (0.197 inch) formed leads.

02 Tape and reel, 2.54 mm (0.100 inch) straight leads.

Caution: Agilent does not

recommend T-1 package, option

02 LEDs for auto-insertion. The

force exerted on the LED lead

frame during the cut and clinch

operation of auto-insertion may

result in cracking of the lamp

epoxy dome which results in

catastrophic failure. It is

suggested that insertion machine

compatibility be confirmed.

Absolute Maximum

Ratings and Electrical/

Optical Characteristics

The absolute maximum ratings,

mechanical dimension tolerances

and electrical/optical

characteristics for lamps

packaged on tape and reel are

identical to the basic catalog

device. Refer to the basic data

sheet for the specified values.

Notes:

1. Minimum leader length at either end of

tape is 3 blank part spaces.

2. Silver saver paper is used as the

interlayer for silver plated lead devices.

3. The maximum number of consecutive

missing lamps is 3.

4. In accordance with EIA and IEC specs,

the anode lead leaves the reel first.

5. Drawings apply to devices with

0.46 mm (0.018 inch) square leads

only. Contact Agilent Sales Office for

dimensions of 0.635 mm (0.025 inch)

square lead devices.

Tape and Reel LED Configurations

Figure 1. T-1 High Profile Lamps, Option 01. Figure 2. T-1 High Profile Lamps, Option 02.

Figure 3. T-1 Low Profile Lamps, Option 01. Figure 4. T-1 Low Profile Lamps, Option 02.

Tape and Reel LED Configurations (cont.)

Figure 5. T-13/4 High Profile Lamps, Option 01. Figure 6. T-13/4 High Profile Lamps, Option 02.

Figure 8. T-13/4 Low Profile Lamps, Option 02.Figure 7. T-13/4 Low Profile Lamps, Option 01.

Dimensional Specifications for Tape and Reel

Item Option 01 02 Symbol Specification Notes

T1 High Profile

Body Height A1 4.70 (0.185)

4.19 (0.165)

Body Diameter D1 3.18 (0.125)

2.67 (0.105)

Component Height H1 25.7 (1.012) Max.

Tl Low Profile

Body Height A2 3.73 (0.147)

3.23 (0.127)

Body Diameter D2 3.05 (0.120)

2.79 (0.110)

Component Height H2 24.7 (0.974) Max.

T13/4 High Profile

Body Height A3 9.19 (0.362)

8.43 (0.332)

Body Diameter D3 5.08 (0.200)

4.32 (0.170)

Component Height H3 30.2 (1.189) Max.

T13/4 Low Profile

Body Height A4 6.35 (0.250)

5.33 (0.210)

Body Diameter D4 5.08 (0.200)

4.32 (0.170)

Component Height H4 27.4 (1.079) Max.

Lead Wire Thickness d 0.45 (0.018) Square Leads

Pitch of Component P 13.7 (0.539)

11.7 (0.461)

Feed Hole Pitch P012.9 (0.508) Cumulative error:

12.5 (0.492) 1.0 mm/20 pitches

Feed Hole Center to Lead Center P1 4.55 (0.179) Measure at crimp

3.15 (0.124) bottom 5.78/3.68

(0.227/0.1448) for

straight leads

Hole Center to Component Center P2 7.35 (0.289)

5.35 (0.211)

Lead to Lead Distance F 5.40 (0.213) 2.54 (0.100) nominal

4.90 (0.193) for straight leads

Component Alignment, Front-rear ∆h0 ± 1.0 (0.039) Figure 9

Tape Width W 18.5 (0.728)

17.5 (0.689)

Hold Down Tape Width W015.3 (0.602)

12.0 (0.472)

Hole Position W1 9.75 (0.384)

8.50 (0.335)

Item Option 01 02 Symbol Specification Notes

Hold Down Tape Position W2 2.54 (0.100) Max.

Height of Component from Hole Center H 21.0 (0.827)

20.0 (0.787)

Lead Clinch Height HO16.5 (0.650)

15.5 (0.610)

Feed Hole Diameter DO4.20 (0.165)

3.80 (0.150)

Total Tape Thickness t 0.90 (0.035) Paper thickness:

0.50 (0.020) 0.55 (0.022)

0.45 (0.018) Figure 9

Length of Snipped Lead L 11.0 (0.433) Max.

Lead Length Under Hold Down Tape I1 14.5 (0.571) Min.

Note:

1. Dimensions in millimetres (inches) maximum/minimum.

Dimensional Specifications for Tape and Reel (cont.)

Figure 11. Reel Configuration and Labeling.

Figure 9. Front to Rear Alignment and

Tape Thickness, Typical All Device

Types. Figure 10. Device Retention Tests and Specifications.

www.semiconductor.agilent.com

Data subject to change.

Obsoletes 5964-9375E (4/96)

5968-4164E (11/99)

T-1 (3 mm) Right Angle LED

Indicators

Technical Data

Features

• Ideal for Card Edge Status

Indication

• Package Design Allows Flush

Seating on a PC Board

• May be Side Stacked on

4.57 mm (0.18") Centers

• Up to 8 Units May be

Coupled for a Horizontal

Array Configuration with a

Common Coupling Bar (See

T-1 Right Angle Array Data

Sheet)

• LEDs Available in All LED

Colors, With or Without

Integrated Current Limiting

Resistor in T-1 Packages

• Easy Flux Removal Design

Option A1

Option A2

• Housing Material Meets UL

94V-0 Rating

• Additional Catalog Lamps

Available as Options

Description

Agilent T-1 Right Angle Indicators

are industry standard status

indicators that incorporate a T-1

LED lamp in a black plastic right

angle mount housing. The

indicators are available in

Standard Red, High Efficiency

Red, Orange, Yellow, and High

Performance Green, with or

without an integrated current

limiting resistor. These products

are designed to be used as back

panel diagnostic indicators and

card edge logic status indicators.

Ordering Information

To order other T-1 High Dome

Lamps in Right Angle Housings in

addition to the parts indicated

above, select the base part

Package Dimensions

NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).

OPTION NO. CATHODE LEAD

LENGTH ANODE LEAD

LENGTH

A1 16.0 (0.630)

MIN. 1.27 (0.050)

NOM. LONGER

THAN CATHODE

UNSHEARED

UNEVEN LEADS

A2 3.43 (0.135)

MIN. 3.43 (0.135)

MIN. SHEARED

UNEVEN LEADS

2.41 (0.095)

REF.

5.21 (0.206)

4.95 (0.195)

2.54 (0.100)

NOM.

1.27 (0.060)

NOM.

SEE TABLE

4.70 (0.185)

REF.

4.65 (0.183)

MAX.

3.68 (0.145)

3.18 (0.125) DIA.

7.44 (0.293)

7.29 (0.287)

6.43 (0.253)

6.27 (0.247)

CATHODE

0.46 (0.018)

SQUARE NOM.

number and add the option code

A1 or A2, depending on the lead

length desired. For example, by

ordering HLMP-1302 Option A1,

you would receive the long lead

option. By ordering HLMP-1302

Option A2, you would receive the

short lead option.

Arrays made by connecting two to

eight single Right Angle

Indicators with a Common

Coupling Bar are available.

Ordering information for arrays

may be found on the T-1 Right

Angle Array data sheet.

Absolute Maximum

Ratings and Other

Electrical/Optical

Characteristics

The absolute maximum ratings

and typical device characteristics

are identical to those of the T-1

LED lamps. For information

about these characteristics, see

the data sheets of the equivalent

T-1 LED lamp.

www.semiconductor.agilent.com

Data subject to change.

Obsoletes 5965-9699E (5/97)

5968-4124E (11/99)