
Industry Standard eMMC Interface
- Supports JEDEC / eMMC 4.4 Standard,
JESD84-A44 compliant
- Backward compatible with eMMC 4.3
Wide Range of eMMC Products
- Available with 2-bits-per-cell (MLC) and
1-bit-per-cell (SLC) NAND to meet various
endurance (program-erase cycles) and data
retention requirements
Multitasking Technology Increases
Performance
- Sequential Read Performance
up to 60 MB/sec
- Sequential Write Performance
up to 35 MB/sec
- Clock Speed up to 52 MHz
- Supports Dual Data Rate (DDR) Mode
Power Management
- Supports eMMC auto-sleep mode to reduce
power consumption
Robust Pre-programmed Firmware
- Implements advanced wear leveling to
maximize product lifespan
- Configurable algorithms support global and
group wear leveling
- Embedded flash file system enables
seamless capacity migrations with no change
to host software
Built-in ECC
- Uses advanced hardware engine to correct
bit errors
Bad Block Management
- Replaces bad blocks with spare blocks in the
NAND flash when uncorrected errors occur
Data Security
- Permanent, temporary and power-on write
protection options for entire device or specific
device partitions
- Secure erase and TRIM commands protect
sensitive data
- Dedicated pin (WP#) provides write protection
for entire device
Multiple Densities with Same Pin-out
- 512 MB, 1 GB, 4 GB, 8 GB, 16 GB, 32 GB,
64 GB, 128 GB
- 100-ball LBGA / BGA package
- 1mm ball spacing increases long-term reliability
Full I-temp Capability
- Industrial operation: -40°C to +85°C
eMMC NANDrive™
Applications
— In-vehicle infotainment
— GPS and telematics
— Data recorder
— Video conferencing
— Tablet PC / Smartbook / Netbook
— Multi-function printer
— Point-of-Sale terminal
— VoIP system / PBX
— Wireless base station
— Router / Gateway / Switch
— Set-top box / Net-top box
— Industrial PC / Single-board computer
— Ultrasound and medical imaging
— Industrial automation & control
— Test & measurement instrumentation
— Video surveillance / ID terminal
Product Description
The eMMC NANDrive™ family builds on Greenliant’s popular portfolio of small form-factor, fully integrated
embedded solid state drives (SSDs). These products integrate Greenliant’s advanced eMMC controller
with one or more NAND ash die in a multi-chip package. eMMC NANDrive is available with 2-bits-per-cell
(MLC) or 1-bit-per-cell (SLC) NAND to meet various customer requirements for lifespan, endurance and
performance. It is offered in a 100-ball package, with 1mm ball pitch for increased long-term reliability.
A built-in microcontroller and ash le management rmware replace the need for host-side Flash File
System (FFS). eMMC NANDrive is compatible with many Freescale, NVIDIA, TI and other popular chipsets.
It operates at full industrial temperatures between -40 and +85 degrees Celsius, giving customers data
storage that can withstand the most severe conditions. Available in various capacities, these space-saving
products are designed with enhanced data integrity and security features.
Greenliant Systems
3970 Freedom Circle, Suite 100
Santa Clara, CA 95054 USA
Tel. 1-408-200-8000
Fax 1-408-200-8099
www.Greenliant.com
85VM Series Product Brief
Key Features
www.NANDrive.com