Ordering number:930C PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB892/2SD1207 Large-Current Switching Applications Features Package Dimensions * Power supplies, relay drivers, lamp drivers, and automotive wiring. unit:mm 2006A [2SB892/2SD1207] Features * FBET and MBIT processed (Original process of SANYO). * Low saturation voltage. * Large current capacity and wide ASO. EIAJ : SC-51 SANYO : MP ( ) : 2SB892 B : Base C : Collector E : Emitter Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit (-)60 V Collector-to-Emitter Voltage VCBO VCEO (-)50 V Emitter-to-Base Voltage VEBO (-)6 V IC (-)2 A Collector Current (Pulse) ICP (-)4 A Allowable Collector Dissipation PC 1 150 W C -55 to +150 C Collector Current Junction Temperature Tj Storage Temperature Tstg Electrical Characteristics at Ta = 25C Parameter Symbol Ratings Conditions min typ max Unit Collector Cutoff Current ICBO VCB=(-)50V, IE=0 (-)0.1 A Emitter Cutoff Current IEBO hFE1 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)100mA (-)0.1 A hFE2 VCE=(-)2V, IC=(-)1.5A VCE=(-)10V, IC=(-)50mA DC Current Gain Gain-Bandwidth Product fT Output Capacitance Cob 10 0 56 0 40 VCB=(-)10V, f=1MHz 150 MHz 12 pF (22) pF * : The 2SB892/2SD1207 are graded as follows by hFE at 100mA : 100 R 200 140 S 280 200 T 400 280 U 560 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 91098HA (KT)/4067KI/3145KI No.930-1/4 2SB892/2SD1207 Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol VCE(sat) Conditions IC=(-)1A, IB=(-)50mA Collector-to-Emitter Breakdown Voltage IC=(-)1A, IB=(-)50mA V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= Emitter-to-Base Breakdown Voltage V(BR)EBO Collector-to-Base Breakdown Voltage Ratings min VBE(sat) IE=(-)10A, IC=0 typ max Unit 0.15 0.4 V (-0.3) (-0.7) V (-)0.9 (-)1.2 V (-)60 V (-)50 V (-)6 V No.930-2/4 2SB892/2SD1207 No.930-3/4 2SB892/2SD1207 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 1998. Specifications and information herein are subject to change without notice. PS No.930-4/4