KSD-D6C011-000 1
SDZ6V2AD
ESD Protection Diode
Application
• ESD Protection
Features
• Transient protection for data lines to IEC 61000-4-2(ESD) 15KV(air), 8KV(contact)
• Small package for use in portable electronics
• Protection one I/O or power line.
• Low leakage current
Ordering Information
Type NO. Marking Package Code
SDZ6V2AD T2 SOD-323
Outline Dimensions unit : mm
S
Se
em
mi
ic
co
on
nd
du
uc
ct
to
or
r
2.35~2.65
0.35 Max.
1.15~1.35
1.60~1.80
CATHODE MARK
0.80~1.00
0.10 Max.
0.19 Max.
0.20 Min.
1 2
PIN Connections
1. Anode
2. Cathode
KSD-D6C011-000 2
SDZ6V2AD
Absolute Maximum Ratings (Ta=25°C)
Characteristic Symbol Rating Unit
Power dissipation PD 200 mW
Junction temperature TJ 150
°C
Storage temperature range TSTG -55~150 °C
Electrical Characteristics (Ta=25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Zener voltage VZ I
Z=5mA 5.7 - 6.7 V
Reverse current IR V
R=3V - - 2
μA
Total capacitance CT V
R=0V, f=1MHz 20 pF
※ Rec ommend PCB solder land (Unit : mm)
KSD-D6C011-000 3
SDZ6V2AD
Fig. 1 PD-Ta
Electrical Characteristic Curves
Fig. 2 I
Z-VZ
Fig. 3 CT - VR
The AUK Corp. products are intended for the use as components in general electronic equipment
(Office and communication equipment, measuri ng equipment, home appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products in equipments
which require high quality and / or reliability, and in equipments which could have major impact to the
welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all
types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case
these AUK Corp. products were used in the mentioned equipments without prior consultation w ith AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
