Advanced Power P-CHANNEL ENHANCEMENT MODE
Electronics Corp. POWER MOSFET
▼ Lower Gate Charge BVDSS -40V
▼ Simple Drive Requirement RDS(ON) 40mΩ
▼ Fast Switching Characteristic ID-26A
▼ RoHS Compliant
Description
Absolute Maximum Ratings
Symbol Units
VDS V
VGS V
ID@TC=25℃A
ID@TC=100℃A
IDM A
PD@TC=25℃W
W/℃
TSTG ℃
TJ℃
Symbol Value Units
Rthj-c Maximum Thermal Resistance Junction-case 3.2 ℃/W
Rthj-a 62.5 ℃/W
Rthj-a Maximum Thermal Resistance Junction-ambient 110 ℃/W
Data and specifications subject to change without notice
-55 to 150
Linear Derating Factor
39
-55 to 150
Parameter
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current, VGS @ 10V
Thermal Data
Parameter
Total Power Dissipation
Operating Junction Temperature Range
Storage Temperature Range
Continuous Drain Current, VGS @ 10V -16
Pulsed Drain Current1-64
+25
-26
0.31
Halogen-Free Product
AP9563GH/J-HF
Rating
-40
Maximum Thermal Resistance, Junction-ambient (PCB mount)3
200902133
1
G
D
S
GDSTO-252(H)
GDSTO-251(J)
The TO-252 package is widely preferred for commercial-industrial
surface mount applications and suited for low voltage applications
such as DC/DC converters. The through-hole version (AP9563GJ) is
available for low-profile applications.
Advanced Power MOSFETs from APEC provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and cost-effectiveness.
AP9563GH/J-HF
Electrical Characteristics@Tj=25oC(unless otherwise specified)
Symbol Parameter Test Conditions Min. Typ. Max. Units
BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=-250uA -40 - - V
RDS(ON) Static Drain-Source On-Resistance2VGS=-10V, ID=-16A - - 40 mΩ
VGS=-4.5V, ID=-12A - - 60 mΩ
VGS(th) Gate Threshold Voltage VDS=VGS, ID=-250uA -1 - -3 V
gfs Forward Transconductance VDS=-10V, ID=-12A - 18 - S
IDSS Drain-Source Leakage Current VDS=-40V, VGS=0V - - -1 uA
Drain-Source Leakage Current (Tj=125oC) VDS=-32V, VGS=0V - - -250 uA
IGSS Gate-Source Leakage VGS= +25V, VDS=0V - - +100 nA
QgTotal Gate Charge2ID=-12A - 16 30 nC
Qgs Gate-Source Charge VDS=-32V - 2.5 - nC
Qgd Gate-Drain ("Miller") Charge VGS=-4.5V - 9 - nC
td(on) Turn-on Delay Time2VDS=-20V - 8 - ns
trRise Time ID=-12A - 30 - ns
td(off) Turn-off Delay Time RG=3.3Ω,VGS=-10V - 35 - ns
tfFall Time RD=1.6Ω-70-ns
Ciss Input Capacitance VGS=0V - 1140 2340 pF
Coss Output Capacitance VDS=-25V - 140 - pF
Crss Reverse Transfer Capacitance f=1.0MHz - 135 - pF
Source-Drain Diode
Symbol Parameter Test Conditions Min. Typ. Max. Units
VSD Forward On Voltage2IS=-12A, VGS=0V - - -1.2 V
trr Reverse Recovery Time2IS=-12A, VGS=0V, - 27 - ns
Qrr Reverse Recovery Charge dI/dt=-100A/µs - 19 - nC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Pulse test
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
3.Surface mounted on 1 in2 copper pad of FR4 board
2
AP9563GH/J-HF
Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics
Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance
v.s. Junction Temperature
Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s.
Reverse Diode Junction Temperature
3
0
20
40
60
80
02468
-VDS , Drain-to-Source Voltage (V)
-ID , Drain Current (A)
TC=25oC -10V
-7.0V
-5.0V
-4.5V
VG= -3.0 V
0
20
40
60
80
0246810
-VDS , Drain-to-Source Voltage (V)
-ID , Drain Current (A)
-10V
-7.0V
-5.0V
-4.5V
VG= -3.0 V
TC= 150 oC
20
24
28
32
36
246810
-VGS , Gate-to-Source Voltage (V)
RDS(ON) (m
Ω
)
ID= -12A
TC=25
℃
0.6
0.8
1.0
1.2
1.4
1.6
1.8
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized RDS(ON)
ID=-16A
VG=-10V
0.6
0.8
1
1.2
1.4
1.6
1.8
-50 0 50 100 150
Tj , Junction Temperature ( oC)
-VGS(th) (V)
0
4
8
12
16
20
0 0.2 0.4 0.6 0.8 1 1.2 1.4
-VSD , Source-to-Drain Voltage (V)
-IS(A)
Tj=25 oCTj=150 oC
AP9563GH/J-HF
Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics
Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance
Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform
4
td(on) trtd(off)tf
VDS
VGS
10%
90%
Q
VG
-4.5V
QGS QGD
QG
Charge
0
2
4
6
8
10
12
14
0 10203040
QG , Total Gate Charge (nC)
-VGS , Gate to Source Voltage (V)
VDS =-32V
ID=-12A
100
1000
10000
1 5 9 1317212529
-VDS , Drain-to-Source Voltage (V)
C (pF)
f
=1.0MH
z
Ciss
Coss
Crss
0.1
1
10
100
0.1 1 10 100
-VDS , Drain-to-Source Voltage (V)
-ID (A)
TC=25oC
Single Pulse
100us
1ms
10ms
100ms
1s
DC
0.01
0.1
1
0.00001 0.0001 0.001 0.01 0.1 1
t , Pulse Width (s)
Normalized Th e rmal Re sponse (Rthjc)
PDM
Duty factor = t/T
Peak Tj = PDM x Rthjc + TC
t
T
0.02
0.01
0.05
0.1
0.2
Duty factor=0.5
Single Pulse
