2313083 - Phoenix Contact - Product.Network

103170_00_en

INTERFACE

PSI-WL-PLUG-USB/BT

Data Sheet

Description

The Bluetooth USB adapter provides an easy wireless

connection between devices with a USB interface and other

Bluetooth devices.

Data connections can be established to third-party devices

or to the PSI-WL-RS232-RS485/BT PSI Bluetooth

converter, making it easy to access controllers directly for

programming or diagnostic purposes.

The PSI-WL-PLUG-USB/BT adapter is plugged directly into

the USB interface, which provides it with a 5 V power

supply. With its compact design and integrated antenna,

this Bluetooth USB adapter is ideal for mobile, temporary

maintenance and diagnostic connections and offers

excellent support as a quick and easy addition to the

PSI-WL-RS232-RS485/BT PSI Bluetooth converter.

The wireless connection has a range of up to 80 m or more

and is based on the international license-free Bluetooth

standard. This wireless standard meets high requirements

for interference-free data transmission, in particular through

the use of the FHSS method (Frequency Hopping Spread

Spectrum) with the 2.4 GHz ISM band.

If you have any technical problems, which you cannot resolve with the aid of this documentation, please contact

us during the usual office hours at:

PSI hotline: +49 - (0) 52 35 - 31 98 90

Fax: +49 - (0) 52 35 - 33 09 99

E-mail: interface-service@phoenixcontact.com

Make sure you always use the the latest documentation.

It can be downloaded at www.download.phoenixcontact.com.

A conversion table is available on the Internet at

www.download.phoenixcontact.com/general/7000_en_00.pdf.

Bluetooth USB Adapter

PSI-WL-PLUG-USB/BT

103170_00_en PHOENIX CONTACT 2

Ordering Data

Technical Data

PSI Bluetooth USB Adapter

Description Type Order No. Pcs./Pck.

PSI Bluetooth USB Adapter (Belkin)

for direct installation on USB type A ports and wireless transmission from

USB interfaces

Scope of supply: Bluetooth USB adapter, CD with configuration software,

documentation and installation instructions

PSI-WL-PLUG-USB/BT 2313083 1

PSI Bluetooth Converter

Description Type Order No. Pcs./Pck.

PSI Bluetooth converter for converting from RS-232/RS-422/RS-485 2-wire

to Bluetooth

PSI-WL-RS232-RS485/BT 2708517 1

Documentation

Description Type Order No. Pcs./Pck.

User manual for PSI-WL Bluetooth interface converter UM EN PSI WL BLUETOOTH 2699723 1

Power Supply

Supply voltage 5 V DC (directly via the USB interface)

Frequency DC

Nominal current consumption

Send peak

Receive peak

150 mA

80 mA

Nominal current 100 mA

LED indicators Blue LED: steady light when adapter is switched on

Configuration

System requirements Windows XP (SP2), 2000, 98 SE, ME

Mac OS X Version 10.3 or later

Configuration interface USB

Configuration is via the USB interface using the configuration software

supplied.

USB Interface

Physics USB 2.0

Connection USB type A, male connector

Transmit rate Up to 2.1 Mbps

Protocols Transparent protocol, including 3964R protocol

Bluetooth Interface

Physics Bluetooth 2.0 specification + EDR

Frequency 2.402 GHz ... 2.480 GHz (ISM band)

Channel distance 1 MHz

Bandwidth 79 MHz

Number of channels 79

Transmission methods Adaptive frequency hopping 1.6 kHz (FHSS)

R&TTE device class Class 2

Bluetooth device class Class 1 = 20 dBm (100 mW), maximum

Transmission power 20 dBm (100 mW), maximum

Range guide values (depending on the application environment) up to 80 dBm

PSI-WL-PLUG-USB/BT

103170_00_en PHOENIX CONTACT 3

Receiver sensitivity -80 dBm

Antenna Internal antenna

Bluetooth profile – GAP (Generic Access Profile)

– SDAP (Service Discovery Application)

– SPP (Serial Port Profile)

– DUN (Dial-Up Networking Profile)

– PAN (Personal Area Network Profile)

– CIP (Common ISDN Access Profile)

– HCRP (Hardcopy Cable Replacement Profile)

– FTP (File Transfer Protocol)

– OPP (Object Push Profile)

– HID (Human Interface Device)

– BIP (Basic Imaging Profile)

– A2DP (Advanced Audio Distribution Profile)

– AVRCP (Audio Video Remote Control Profile)

– SYNC (Synchronization Profile)

– Headset (Headset Profile)

– Fax (Fax Profile)

Supported multi-slot packets 1 / 3 / 5 slot packets

Operation – ≤ 7 x parallel point-to-point connections

– Bluetooth client or Bluetooth server

LED indicator/Bluetooth data indicator Blue LED

– Steady light: Bluetooth connection established

– Flashing: data transmission via Bluetooth

Bluetooth security – 128-bit encryption

– Password protection

– Fixed pairing

– Favorites feature

– Masking option

Bluetooth Interface (Continued)

System Requirements

PC - PC-compatible computer, 200 MHz processor, minimum

- Memory: 64 MB, minimum, 128 MB recommended

- One free USB 1.1 interface

- Windows XP (SP2), 2000, 98 SE, ME

Macintosh - One free USB 1.1 interface

- Mac OS X Version 10.3 or later

General Data

CE conformity According to EMC Directive 89/336/EC and R&TTE Directive 1999/5/EC

RoHS conformity Yes

Approvals/wireless licenses

Europe

USA

Canada

ETSI EN 300 826

FCC Part 15

RSS-210

Ambient temperature range

Operation

Storage

0°C ... 70°C

-30°C ... +80°C

Permissible humidity 5% ... 90% not condensing

Dimensions (H x W x D) 8 mm x 18 mm x 58 mm

Weight Approx. 7 g

Degree of protection IP20

Separate ground levels No

PSI-WL-PLUG-USB/BT

103170_00_en PHOENIX CONTACT 4

International Approvals (As At 03/2007)

European Union (EU)

Austria, Belgium, Czech Republic, Cyprus, Denmark, Estonia, Finland, France1, Germany, Great Britain, Greece, Hungary,

Ireland, Italy2, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain,

Sweden.

Europe (excluding EU)

Iceland, Norway (excluding Spitzbergen), Switzerland

North America

Canada, USA

Middle East

Bahrain, Dubai

Conformance With EMC Directive 89/336/EC

Electrostatic discharge (ESD) EN 301489-1/EN 61000-4-2 Criterion B

8 kV air discharge

4 kV contact discharge

4 kV indirect discharge

Fast transients (burst)

Signal/Power supply

EN 61000-4-4

Not relevant because cable length < 3 m

Surge current load

Signal

Power supply

EN 61000-4-5

Not relevant because cable length < 30 m

Not relevant because cable length < 10 m

Immunity to interference

Conducted interference

EN 61000-4-6

Not relevant because cable length < 3 m

Electromagnetic HF field

Amplitude modulation

EN 301489-1/EN 61000-4-3 Criterion A

3 V/m, AM 80%, 1 kHz sine

Frequency range 80 MHz - 2 GHz

Emitted interference

Radiated emission EN 55022 Class B

Conformance With R&TTE Directive 1999/5/EEC

EMI

Immunity to interference (electromagnetic compatibility of wireless systems) EN 301489-1 V1.5.1

EN 301489-17 V1.2.1

Part 1: General Technical Requirements

Part 17: Wireless Systems in the 2.4 GHz

and 5-GHz Range

Safety

Protection of personnel with regard to electrical safety EN 60950-1

Health

Limitation of exposure of the population to electromagnetic fields EC Gazette 1999/519/EC EC Council recommendation of

July 12, 1999

Radio

Effective use of the frequency spectrum and prevention of radio interference ETSI EN 300328 V1.2.1, V1.3.1

1. Does not include use outside buildings. The permissible transmission power is limited here to 10 mW.

2. Does not include use outside buildings. A license is required to use the adapter outside buildings.

PSI-WL-PLUG-USB/BT

103170_00_en PHOENIX CONTACT 5

Features

The Bluetooth USB adapter can be used for a wide range of different applications, for example:

– Easy alternative to serial point-to-point cabling

– Wireless operation and monitoring for processes

– Wireless parameterization, and programming and diagnostic connections

The PSI-WL-PLUG-USB/BT Bluetooth USB adapter offers the following performance features in particular:

– High-performance Bluetooth interface

– Compact design and integrated antenna

– Direct connection to the interface

– Transmission power 100 mW

– Range up to 80 m

– Bluetooth access protected by password, fixed device pairing or device access list

– User-friendly configuration software

– Transmission quality diagnostic and logging options

– Adaptive frequency hopping for optimum coexistence with WLAN systems

– Parallel point-to-point connections with up to seven devices

Application Examples

The PSI-WL-PLUG-USB/BT PSI Bluetooth USB adapter is accessed via a second identical device or via the

PSI-WL-RS232-RS485/BT PSI Bluetooth converter. Wireless access via third-party devices, which already have an

integrated Bluetooth interface, e.g., PDA, notebook or cell phone, is also supported.

Point-to-Point Connections

Programming Connection

Programming connection between a computer with a

USB interface and a PLC with an RS-232, RS-422 or

RS-485 interface.

Parallel Point-to-Point Connection

Parallel point-to-point connection with up to seven

Bluetooth devices, allowing simultaneous access to a

variety of systems (e.g., display and programming

systems).

Programming Connection

Programming connection between a computer and a

PC-based controller with a USB interface.

RS232

VCC

PSI-WL-RS232-

RS485/BT

Ord.No.27 08 517

SER ERR

ANT

RES

SIGNAL

103170A001

RS232

VCC

PSI-WL-RS232-

RS485/BT

Ord.No.2708517

SER ERR

ANT

RES

SIGNAL

103170A002

...

£7x

RS232

VCC

PSI-WL-RS232-

RS485/BT

Ord.No.27 08 517

SER ERR

ANT

RES

SIGNAL

RS232

VCC

PSI-WL-RS232-

RS485/BT

Ord.No.27 08 517

SER ERR

ANT

RES

SIGNAL

103170A003

PSI-WL-PLUG-USB/BT

103170_00_en 6

PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany

Phone: +49 - 52 35 - 30 0 • Fax: +49 - 52 35 - 34 12 00

www.phoenixcontact.com

Multi-Drop Connections

Networking for Automation Components

One example is a PLC with an RS-232, RS-422 or

RS-485 interface. Up to seven Bluetooth slaves can be

connected to a Bluetooth master.

Mobile Network Access

Mobile network access via a Bluetooth access point (PAN

profile). Up to seven Bluetooth slaves can be connected to

a Bluetooth master.

RS232

VCC

PSI-WL-RS232-

RS485/BT

Ord.No. 27 08 517

SER ERR

ANT

RES

SIGNAL

103170A004

...

£7x

Ethernet

FL BLUETHOOTH AP

Bluethooth Access Point

Ord No.: 27 37 999

LAN

)))

103170A005

...

£7x