Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: Date: B32232 August 2004 (c) EPCOS AG 2004. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Metallized polyester film capacitors (MKT) B32232 General purpose (wound) Typical applications Smoothing Filtering Dimensional drawing Climatic Max. operating temperature: 100 C Climatic category (IEC 60068-1): 40/100/21 Construction Dielectric: polyethylene terephthalate (polyester, PET) Cylindrical winding Insulating sleeve Face ends sealed with epoxy resin Dimensions in mm Diameter d 7.0 > 7.0 Terminals Central axial wire leads, lead-free tinned Lead diameter d1 0.6 0.8 When bending leads take care to leave a clearance of 1 mm to the capacitor body. Marking Manufacturer, series number, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage. date of manufacture (coded) Delivery mode Bulk (untaped) Taped (reel) For notes on taping, refer to chapter "Taping and packing". Detail specification DIN 45910-112 2 B32232 General purpose (wound) Overview of available types Type B32232 VR (VDC) 100 250 400 630 Vrms (VAC) 63 160 200 200 CR (F) 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 3 B32232 General purpose (wound) Ordering codes and packing units VR Vrms CR f 60 Hz VDC VAC F 0.10 100 63 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 0.10 250 160 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 0.10 400 200 0.15 0.22 0.33 0.47 0.68 1.0 Max. dimensions dxl mm 6.0 x 14.0 6.0 x 14.0 6.0 x 14.0 6.0 x 19.0 6.5 x 19.0 7.0 x 19.0 8.5 x 19.0 8.0 x 27.0 9.5 x 27.0 11.5 x 27.0 12.0 x 32.0 14.0 x 32.0 6.0 x 14.0 7.0 x 14.0 6.0 x 19.0 8.0 x 19.0 7.5 x 19.0 8.0 x 27.0 10.0 x 27.0 11.0 x 32.0 10.5 x 32.0 14.0 x 32.0 16.5 x 32.0 16.0 x 42.0 7.0 x 19.0 8.5 x 19.0 8.0 x 27.0 9.5 x 27.0 11.0 x 27.0 11.5 x 32.0 13.5 x 32.0 Ordering code (composition see below) B32232A1104+*** B32232A1154+*** B32232A1224+*** B32232A1334+*** B32232A1474+*** B32232A1684+*** B32232A1105+*** B32232A1155+*** B32232A1225+*** B32232A1335+*** B32232A1475+*** B32232A1685+*** B32232A3104+*** B32232A3154+*** B32232A3224+*** B32232A3334+*** B32232A3474+*** B32232A3684+*** B32232A3105+*** B32232A3155+*** B32232A3225+*** B32232A3335+*** B32232A3475+000 B32232A3685+000 B32232A6104+*** B32232A6154+*** B32232A6224+*** B32232A6334+*** B32232A6474+*** B32232A6684+*** B32232A6105+*** Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = 20% K = 10% J = 5% *** = Packaging code: 189 = Reel 000 = Untaped 4 Reel Untaped pcs./unit pcs./unit 1000 1000 1000 1000 1000 1000 1000 1000 800 500 500 500 1000 1000 1000 1000 1000 1000 500 500 500 500 1000 1000 1000 800 500 500 500 500 500 500 500 500 500 500 500 500 500 500 250 500 500 500 500 500 500 500 500 500 250 250 200 500 500 500 500 500 500 500 B32232 General purpose (wound) Ordering codes and packing units VR Vrms CR f 60 Hz VDC VAC F 0.033 630 200 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 Max. dimensions dxl mm 6.5 x 19.0 7.5 x 19.0 8.5 x 19.0 10.5 x 19.0 10.0 x 27.0 11.5 x 27.0 13.5 x 27.0 14.5 x 32.0 15.0 x 32.0 16.0 x 32.0 Ordering code (composition see below) B32232A8333+*** B32232A8473+*** B32232A8683+*** B32232A8104+*** B32232A8154+*** B32232A8224+*** B32232A8334+*** B32232A8474+000 B32232A8684+000 B32232A8105+000 Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: M = 20% K = 10% J = 5% *** = Packaging code: 189 = Reel 000 = Untaped 5 Reel Untaped pcs./unit 1000 1000 1000 500 500 500 500 pcs./unit 500 500 500 500 500 500 500 500 500 500 B32232 General purpose (wound) Technical data Operating temperature range Max. operating temperature Top,max Upper category temperature Tmax Lower category temperature Tmin Rated temperature TR Dissipation factor tan (in 10-3) at 20 C (upper limit values) Insulation resistance Rins or time constant = CR Rins at 20 C, rel. humidity 65% (minimum as-delivered values) DC test voltage Category voltage VC (continuous operation with VDC or VAC at f 60 Hz) Operating voltage V op for short operating periods (VDC or VAC at f 60 Hz) Damp heat test Limit values after damp heat test at CR 47 nF 1 kHz 10 kHz +100 C +100 C 40 C +85 C 47 nF < CR 1 F CR > 1 F VR 100 VDC 250 VDC 10 10 20 25 CR 0.33 F 3750 M 7500 M 10 CR > 0.33 F 1250 s 2500 s 1.4 VR, 2 s TA (C) TA 85 85<TA100 TA (C) TA 100 DC voltage derating VC = VR VC = VR (165TA)/80 DC voltage (max. hours) Vop = 1.25 VC (2000 h) AC voltage derating VC,rms = Vrms VC,rms=Vrms (165TA)/80 AC voltage (max. hours) Vop = 1.0 VC,rms (1000 h) 21 days/40 C/93% relative humidity Capacitance change C/C Dissipation factor change tan Insulation resistance Rins or time constant = CR Rins 6 5% 5 10-3 (at 1 kHz) 7 10-3 (at 10 kHz) 20% of minimum as-delivered values B32232 General purpose (wound) Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/s. "k0" represents the maximum permissible pulse characteristic of the waveform applied to the capacitor, expressed in V 2/s. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. dV/dt values Lenght of capacitor VR Vrms VDC VAC 14 mm 100 250 400 630 63 160 200 200 19 mm 27 mm 32 mm 42 mm 6 10 3 5 7 10 2 3 4 7 1.5 2.5 3 5 2 14 mm 19 mm 27 mm 32 mm 42 mm k0 in V2/s 1 200 5 000 600 2 500 5 600 12 500 400 1 500 3 200 8 800 300 1 250 2 400 6 300 1 000 dV/dt in V/s k0 values Lenght of capacitor VR Vrms VDC VAC 100 250 400 630 63 160 200 200 7 B32232 General purpose (wound) Impedance Z versus frequency f (typical values) Permissible AC voltage Vrms versus frequency f Values can be obtained on request. In specific cases please provide a scaled voltage/ time graph and state operating conditions. 8