SP120 Series 100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply Features * * * * * * * * Single output from 100-120W Input voltage range: 90-2464V Output current(0-8400mA) 2.5"x 5" and 3"x 5" form factor High variety of output voltages from 12Vdc-48Vdc Efficiency to 85% Protections: OVP, SCP, Brown-out, and overload UL, cUL, CE, FCC, TUV certifications *Product images are for illustrative purposes only and may vary from actual design. Applications * Network system, telecommunication system, storage system, industrial equipment, and printers Model List*(See part number scheme for model number details) Model Number Input Voltage Output Power Output Voltage Output Current Min. Output Current Max. Efficiency Ripple & Noise (mVp-p) SP120-1121 90-264Vac 100W 12V 0 8.4A 84% 120 SP120-1151 90-264Vac 120W 15V 0 8A 85% 150 SP120-1191 90-264Vac 120W 19V 0 6.32A 85% 190 SP120-1241 90-264Vac 120W 24V 0 5A 85% 240 SP120-1301 90-264Vac 120W 30V 0 4A 85% 300 SP120-1361 90-264Vac 120W 36V 0 3.33A 85% 360 SP120-1481 90-264Vac 120W 48V 0 2.5A 85% 480 Certificates UL/cUL/CB TUV/CE/FCC UL/cUL/-/CE/FCC -/-/-/CE/FCC UL/cUL/CB TUV/CE/FCC -/-/-/CE/FCC UL/cUL/CB TUV/CE/FCC UL/cUL/CB TUV/CE/FCC Notes: 1. Load regulation is tested at 10% to 100% of the rated load. 2. Peak-to-peak for 100W, and 120W models, convection rating @115Vac MIN.; Measurements with a 20MHz bandwidth and terminated with a 22uF electrolytic Cap. In parallel with a 0.1uF ceramic Cap. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com May 8, 2019 1/4 SP120 Series 100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply Technical Data Input Voltage Frequency Input Current Inrush Current Load Regulation Line Regulation Turn-on Time Hold-up Time Safety Ground Leakage Current Brown-out Protection Over Voltage Protection Over Load Protection Short circuit protection Operating Temperature Storage Temperature Storage Humidity 90 - 264Vac 50/60 Hz @115Vac 2.0A rms ; @230Vac 1.0A rms Cold Start@ 115Vac, at25 < 40 Ap-p Cold Start@ 230Vac, at25 < 80 Ap-p 5% 0.5% <3 Sec (Full Load @115Vac) > 16mSec (Full Load @115Vac) <3.5mA (Class I Type@230Vac 50Hz) Auto-Recovery Latch off (140%30%) Hiccup/Auto-Recovery Hiccup/Auto-Recovery 0-50 -40-85 5%-95% RH Safety and EMC Approval UL 60950-1 cUL 60950-1 CB Report(IEC60950-1) TUV EN 60950-1 CE FCC (some models) (some models) (some models) (some models) Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com May 8, 2019 2/4 SP120 Series 100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply Mechanical Diagram Dimensions: Type A: 2.55"x5"x0.9" (W x L x H inch) Type B: 3.0"x5"x0.9" (W x L x H inch) Connector Types & PIN Assignments Connector Connector Type CON 1 (INPUT) Molex 10-63-4027 or Equivalent parts Mating Type=Molex 09-50-1031 or Equivalent CON2 (OUTPUT) Molex 09-65-268 or Equivalent parts Mating Type= Molex 09-50-1061 or Equivalent PIN Number Signal PIN 1 PIN 2 PIN 3 PIN 4~6 PIN 1~3 LINE NC NEUTRAL +V RETURN Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com May 8, 2019 3/4 SP120 Series 100-120W, 90-264Vac Input, Open-frame Switching Mode Power Supply Part Number Scheme SP 120-1 XX 1 SP=Open-frame series 120=Output power Watts 1=Single Input 1=Single output XX=Rated Voltage Ex.) 12=12V 48=48V *Product images are for illustrative purposes only and may vary from actual design. *Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or omissions. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com May 8, 2019 4/4