8533 Series Description Applications * Screw coupling * Interchangeable and intermateable with MIL-C 83723 Series III T type * Plug with self locking system * High temperature connector * High level shock and vibration * Thermocouple contacts available except hermetic connectors. Engine area/sensors in harsh environments, railways (brake system), for all purposes in severe climatical environment and high temperature. Standards NFL 54143 - EN 2997 Characteristics Mechanical Electrical Climatic * Shell : aluminum alloy (class R-W-A) stainless steel (class K, E, Y and YE) * Plating : nickel (class R) olive green cadmium (class W) black anodized (class A) passivated (class K, E, Y and YE) * Insulator : thermoset * Grommet and seal : silicone elastomer * Contact : copper alloy ferrous alloy (class Y and YE) * Plating : gold over nickel * Mechanical endurance : 250 operations (class R and W) 500 operations (class K, E, Y and YE) * Shock : 300 g during 3 ms * Vibration : random 5 Hz to 2000 Hz 1 G2/Hz (2x8 hours) * Contact retention : size 20 : 090 N size 16 : 111 N size 12 : 133 N * Dielectric withstanding * Working temperature : - 65C to 175C (class W) - 65C to 200C (class R, A, K and Y) - 65C to 260C cyclic (class E and YE) * Leakage : low pressure immersion L54001 and interfacial sealing : pressure 2kPa * Hermeticity : differential pressure of 1 bar (air helium) leakage is 0,36 mm3/hr * Damp heat : as per NFL 54143 and EN 2997 10 cycles of 24 hours * Salt spray : 48 hours (class R-K-E-Y and YE) 500 hours (class W) * Fire resistance : as per NFL 54143 and EN 2997 (class K and E) Altitude Service At ground 15 000 m 21 000 m 33 000 m 1500 600 400 200 Vrms Vrms Vrms Vrms * Contact resistance : as per NFL 54143 and EN 2997 * Insulation resistance : > 5000 M at 500 Vdc * Max current rating per contact : size 20 : 7.5 A size 20 : 05 A class Y size 16 : 13,0 A size 16 : 10 A and YE size 12 : 23,0 A size 12 : 17 A * Electrical continuity : - 5 m with RFI shielded - 60 m without RFI shielded * Shielding : to 100 MHz at 1 GHz attenuation > 65 dB } Resistance to fluids MIL-H 5606 - SKYDROL 500 B4 - LD4 JP5 - MIL-L 7870 A - MIL-L 23699 MIL-L 7808 - MIL-C 25769 - MIL-A 8243 Ordering information Environmental connectors 8533 basic series shell type class 0 7 3 4 - square flange receptacle jam nut receptacle plug with self locking and RFI shielding plug with self locking W R A K E - 175C 200C 200C 200C 260C -0 R S 14 - 15 P N * (aluminum version with olive green cadmium plating) (aluminum version with nickel plating) (aluminum version with black anodized plating) (stainless steel version) (stainless steel version) S - with 360 teeth shell size - 08-10-12-14-16-18-20-22-24-26-28 contact layouts - see table p 135 contact type polarization P - male S - female - N-6-7-8-9-Y - see p 136 specification without specification - connector supplied with standard contacts 08 - connector supplied with large barrel contacts L - connector supplied without contacts 131 8533 Series Backshells aluminum version 852 - 31 N 14 8527- 01 14 * 10 - 05 P N 83723- 21 R 14 basic series backshell type 31 - backnut 52 - straight cable clamp 51 - elbow cable clamp plating N - nickel A - black anodized W - olive green cadmium shell size - 08-10-12-14-16-18-20-22-24 Backshells stainless steel version basic series backshell type shell size specification 01 - backnut 02 - straight cable clamp - 08-10-12-14-16-18-20-22-24 A - obligatory suffix for backshell type 02 only NOTE : for others types and sizes backshells - See catalogue M 85049 Hermetic connectors 8533 basic series shell type class shell size contact layouts contact type polarization -1 Y 1 - solder fixing receptacle 2 - square flange receptacle 7 - jam nut receptacle Y - 200 YE - 260 - 08-10-12-14-16-18-20*-22-24* see table p 135 P - male only see table p 136 * Consult us Protective caps aluminum version basic series cap type 21 - cap for receptacle 22 - cap for plug plating R - nickel W - olive green cadmium A - black anodized shell size 132 - 08-10-12-14-16-18-20-22 8533 Series Cross reference list FCI Souriau EN 2997 NFL 54143 (1) AEROSPATIALE ROLLS ROYCE Description ASN-E0455-01 ** N - Backnut 852-52N ** - ASN-E0455-02 ** N - 852-51N ** - ASN-E0455-03 ** N - 8527-01 ** - ASN-E0199-01 ** K - 8527-02 ** A - ASN-E0199-02 ** K - - - Standard size 20 version - Aluminum 852-31 ** Straight cable clamp version steel Stainless Elbow cable clamp Backnut Straight cable clamp EN 3155-018 M 2020 8526-1349 EN 3155-018 M 1616 NSA 938 151 PA 1600 - Standard size 16 8526-1350 EN 3155-018 M 1212 NSA 938 151 PA 1200 - Standard size 12 8522-2349A EN 3155-018 M 2018 NSA 938 151 PA 2000 - 8522-6179A EN 3155-018 M 1614 NSA 938 151 PA 1601 - 8526-4175 EN 3155-018 M 1618 NSA 938 151 PA 1602 - 8526-5041 EN 3155-018 M 1218 NSA 938 151 PA 1202 - 8526-1344 EN 3155-019 F 2020 8526-1346 EN 3155-019 F 1616 NSA 938 152 SA 1600 - 8526-1347 EN 3155-019 F 1212 NSA 938 152 SA 1200 - 8520-292 EN 3155-019 F 2018 NSA 938 152 SA 2000 - 8522-6180A EN 3155-019 F 1614 NSA 938 152 SA 1601 - Large barrel size 16 8526-4176 EN 3155-019 F 1618 NSA 938 152 SA 1602 - Small barrel size 16 8526-5591 EN 3155-019 F 1218 NSA 938 152 SA 1202 - Small barrel size 12 8533-1000 EN 3155-004 M 2020 8533-1004 EN 3155-004 M 1616 ASN-E 0445 FW 1600 ESC30 P16 BC 8533-1002 EN 3155-004 M 2018 ASN-E 0445 FW 2001 - 8533-1006 EN 3155-004 M 1614 ASN-E 0445 FW 1601 - 8533-1008 EN 3155-004 M 1618 ASN-E 0445 FW 1602 - Small barrel size 16 8533-1035 EN 3155-004 M 1212 ASN-E 0445 FW 1200 ESC30 P12 BC Small barrel size 1 8533-1019 EN 3155-044 M 2022 - - 8533-1001 EN 3155-005 F 2020 - ESC30 S20 BC 8533-1005 EN 3155-005 F 1616 ASN-E 0446 DW 1600 ESC30 S16 BC 8533-1003 EN 3155-005 F 2018 ASN-E 0446 DW 2001 - 8533-1007 EN 3155-005 F 1614 ASN-E 0446 DW 1601 - 8533-1009 EN 3155-005 F 1618 ASN-E 0446 DW 1602 - 8533-1036 EN 3155-005 F 1212 ASN-E 0446 DW 1200 ESC30 S12 BC 8533-1018 EN 3155-045 F 2022 - Class 175 C and 200 C - Standard size 20 Standard size 16 Standard size 12 Large barrel size 20 Standard size 20 Standard size 16 Male Large barrel size 20 Large barrel size 16 Double crimping size 20 Standard size 20 Standard size 16 Female ESC30 P20 BC Small barrel size 12 Female - Small barrel size 16 Contact - Large barrel size 20 Large barrel size 16 Class 260 C - Male 8526-1348 Large barrel size 20 Large barrel size 16 Small barrel size 16 Standard size 12 Double crimping size 20 133 8533 Series Cross reference list EN 2997 NFL 54143 (1) AEROSPATIALE BOEING BACC 63 CN/CM BOEING BACC 63 BR/BT(2) ROLLS ROYCE 08(3) - P ASN-E0454RS **-** S - - - 08(3) - - - - - - - - - - - - - - - - - - - P ASN-E0452RS **-** S - - - - - - - - - - - L 08(3) 08 (3) L L EN2997-RS6 **-** M F A EN2997-WS6 **-** B A EN2997-RS6 **-** B A EN2997-WS6 **-** B PA ASN-E0452RS **-** S - - - - - - - - - - 08(3) - P ASN-E0451R **-** S - - - 08 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - L L (3 EN2997-R6 **-** M F EN2997-W6 **-** M F A EN2997-R6 **-** B A EN2997-W6 **-** B P 08(3 8533-0KS **-** S P 8533-0KS **-** S EN2997-S0 **-** M F P L A 8533-0KS **-** S EN2997-S0 **-** B P 08(3 8533-3KS **-** S P 8533-3KS **-** S EN2997-S6 **-** M F P L A 8533-3KS **-** S EN2997-S6 **-** B P 08(3) 8533-4KS **-** S P 8533-4KS **-** S EN2997-K6 **-** M F P L A 8533-4KS **-** S EN2997-K6 **-** B P A ASN-E0451R **-** S - plug with self locking square flange receptacle - - - plug with self locking - - - and RFI shielded - - - - - - - - - - - - - - - - **-** P EN2997-Y1 **-** M - - - - **-** P EN2997-Y0 **-** M - - - - 8533-7Y **-** P EN2997-Y7 **-** M - - - - P ASN-E0444SE **-** S - P A BACC63BT **B** S P BACC63BT **B** S - P 08(3) 8533-4ES **-** S P 8533-4ES **-** S EN2997-KE6 **-** M F P A 8533-4ES **-** S L EN2997-KE6 **-** B and RFI shielded - 8533-1Y P 08(3) 8533-3ES **-** S P 8533-3ES **-** S EN2997-SE6 **-** M F P A 8533-3ES **-** S L EN2997-SE6 **-** B Plug with self locking - 8533-2Y P 08(3 8533-0ES **-** S P 8533-0ES **-** S EN2997-SE0 **-** M F P L A 8533-0ES **-** S EN2997-SE0 **-** B 134 PA ASN-E0454RS **-** S Class 175 C and 200 C P 8533-4RS **-** S P 8533-4WS **-** S P 8533-4RS **-** S P 8533-4WS **-** S P 8533-4RS **-** S P 8533-4WS **-** S L P A BACC63CN**-** S P P ASN-E0444SE **-** S A BACC63CN**-** S - P ASN-E0442SE **-** S - P A BACC63CM**-** S P P ASN-E0442SE**-** S A BACC63CM**-** S P A BACC63BR **B** S P BACC63BR **B** S - P ESC10KE0 **-** S solder fixing receptacle square flange hermetic receptacle jam nut hermetic receptacle square flange receptacle P ESC10SE6 **-** S P ASN-E0441KE**-** S - - - - - - - - - P A ASN-E0441KE**-** S plug with self locking plug with self locking Class 260 C P 8533-3RS **-** S P 8533-3WS **-** S P 8533-3RS **-** S P 8533-3WS **-** S P 8533-3RS **-** S P 8533-3WS **-** S EN2997-RS0 **-** M F EN2997-WS0 **-** M F A EN2997-RS0 **-** B A EN2997-WS0 **-** B Square flange receptacle Aluminum version P 8533-0RS **-** S P 8533-0WS **-** S P 8533-0RS **-** S P 8533-0WS **-** S P 8533-0RS **-** S P 8533-0WS **-** S Description Stainless steel version FCI Souriau and RFI shielded plug with self locking P ESC10KE6 **-** S 8533-KE5 ** EN2997-KE5 ** - - - 8533-1YE **-** P EN2997-YE1 **-** M - - - ESC10YE1 **-** P - solder fixing receptacle 8533-2YE **-** P EN2997-YE0 **-** M - - - ESC10YE2 **-** P square flange hermetic receptacle 8533-7YE **-** P EN2997-YE7 **-** M - - - - dummy receptacle jam nut hermetic receptacle (1) : Part numbers in specification NLF 54143. Replace EN 2997 by 3. (2) : Superseded by BACC 63 CN/CM (3) : 08 for #20 contacts layouts 8533 Series Contact layouts viewed from front face of male insulator class 200C class 260C hermetic 08 08-03 3#20 08-98 3#20 10 10-05 5#20 10-06 6#20 12 12-03 3#16 12-12 12#20 14 14-04 4#12 14-07 7#16 14-15 15#20 1 5 2 16 3 16-10 10#16 16-24 24#20 SN393 4 4 Coax 50 1#16 18 18-14 14#16 18-31 31#20 18-08 8#12 20 20-39 37#20 2#16 20-41 41#20 20-16 16#16 22 22-12 12#12 22-19 19#16 22-55 55#20 24 24-61 61#20 24-30 30#16 28 Consult us - Special product. 28-42 42#16 For other contacts layout please consult us. 135 8533 Series Polarization positions key einsert N 6 7 8 9 Y shell 08 a b c 0 0 0 0 0 0 105 102 80 35 positions key einsert N 6 7 8 9 Y 0 0 0 0 0 0 140 132 118 140 215 248 230 205 alternative shell key and insert positions (MIL STD 1554) shell 10 shell 12 shell 14 d a b c d a b c d a b c d 140 149 152 152 135 152 215 192 222 204 199 268 shell 16 b c d a shell 18 b c d 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 320 102 132 248 320 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259 312 80 118 230 312 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342 275 35 140 205 275 84 152 204 334 84 152 204 334 84 152 204 334 84 152 204 334 24 135 199 240 24 135 199 240 24 135 199 240 98 152 268 338 98 152 268 338 alternative shell key and insert positions (MIL STD 1554) shell 20 shell 22 shell 24 a b c d a b c d a b c d 105 18 92 84 24 98 a view of front face of plug shell 28 a b c d 265 105 140 215 265 105 140 215 265 105 140 215 265 259 18 149 192 259 18 149 192 259 18 149 192 259 342 92 152 222 342 92 152 222 342 92 152 222 342 334 240 338 Crimp contacts class 260C class 175C and 200C contact size part numbers male contact female contact type code by colour bands admissible wire section AWG mm2 external o over insulator min. Max. 20 standard large barrel 8526-1348 8522-2349A 8526-1344 8520-292 red - red red - violet 24-20 22-18 0.21-0.60 0.38-0.93 0.85 0.85 2.10 2.10 16 standard large barrel small barrel 8526-1349 8522-6179A 8526-4175 8526-1346 8522-6180A 8526-4176 blue - blue blue - orange blue - orange 20-16 18-14 22-18 0.60-1.34 0.93-1.91 0.38-0.93 1.20 1.20 1.20 2.70 2.70 2.70 12 standard small barrel 8526-1350 8526-5041 8526-1347 8526-5591 yellow - yellow yellow - violet 14-12 22-18 1.91-3.18 0.38-0.93 1.90 1.90 4.01 4.01 20 standard small barrel 8533-1000 8533-1002 8533-1001 8533-1003 red - red + 1 white dot red - violet + 1 white dot 24-20 22-18 0.25-0.60 0.38-0.93 0.85 0.85 2.10 2.10 20 double crimping 8533-1019 8533-1018 red - green + 1 white dot 22 0.4 - 1.25 16 standard large barrel small barrel 8533-1004 8533-1006 8533-1008 8533-1005 8533-1007 8533-1009 blue - blue + 1 white dot blue - orange + 1 white dot blue - violet + 1 white dot 20-16 18-14 22-18 0.60-1.34 0.93-1.91 0.38-0.93 1.20 1.20 1.20 2.70 2.70 2.70 12 standard 8533-1035 8533-1036 yellow - yellow + 1 white dot 14-12 1.91-3.18 1.90 4.01 Thermocouple contacts type class 175C and 200C contact size 136 male contact C : chromel A : alumel standard 20 large barrel 16 standard 12 standard female contact part numbers code by colour bands part numbers code by colour bands C 8522-875A brown-orange-green 8522-877A brown-yel.-brown A 8522-876A brown-orange-yel. 8522-878A brown-yel.-black C 8522-3761 yellow 2 dots 8522-3770 yellow 2 dots A 8522-3760 black 2 dots 8522-3771 black 2 dots C 8522-881 yellow 1 dot 8522-883 yellow 1 dot A 8522-882 black 1 dot 8522-884 black 1 dot C 8522-887 yellow 1 dot 8522-889 yellow 1 dot A 8522-888 black 1 dot 8522-890 black 1 dot admissible wire section external o over insulator AWG mm min. Max. 24-20 0.21-0.60 0.85 2.10 22-18 0.38-0.93 0.85 2.10 20-16 0.60-1.34 1.20 2.70 14-12 1.91-3.18 1.90 4.01 2 8533 Series Dimensions Plug type 3 classes WS - RS - KS - ES and type 4 classes WS - AS - KS - ES with backshells Aluminum backshells O for flange Backnut 31 Straight cable clamp 52 Elbow cable clamp 51 shell size 08 10 12 14 16 18 20 22 24 28 A Max 21.30 24.90 29.60 31.25 34.42 37.34 41.91 44.07 47.24 52.00 .839 .980 1.165 1.230 1.355 1.470 1.650 1.735 1.860 2.047 1/2"-20 Thread UNEF 2A C Max 34.50 5/8"-24 UNEF 2A 34.50 3/4"-20 UNEF 2A 34.50 7/8"-20 UNEF 2A 34.50 1"-20 UNEF 2A 34.50 1-1/16"-18 1-3/16"-18 1-5/16"-18 1-7/16"-18 UNEF UNEF UNEF UNEF 2A 2A 2A 2A 34.50 34.50 34.50 34.50 1-3/4"-18 UNEF 2A 34.50 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 D Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 .616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 - E 6.75 9.40 12.80 14.75 17.93 19.94 23.11 26.29 29.20 - .266 .370 .504 .581 .706 .785 .910 1.035 1.150 - F Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 - .506 .506 .506 .506 .506 .506 .506 . 506 .506 - L1 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 - B O for flange Stainless steel backshells 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 - 3.20 4.75 7.40 8.90 12.75 13.45 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .530 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - H Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 - .752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 - J Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 - .892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 - L2 Max 45.80 47.60 51.00 51.00 54.00 61.00 63.60 67.50 69.90 - 1.803 1.874 2.008 2.008 2.126 2.402 2.504 2.657 2.752 - N Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 - .807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 - min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .518 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - M Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 - 1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 - L3 Max 50.75 52.45 55.05 56.55 60.45 61.85 63.40 65.05 66.65 - 1.998 2.065 2.167 2.226 2.380 2.435 2.496 2.561 2.624 - P Max 15.20 18.30 21.50 24.70 28.70 29.60 32.90 36.00 39.50 - .598 .720 .846 .972 1.130 1.165 1.295 1.417 1.555 - Q Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 - .295 .382 .508 .587 .711 .789 .921 1.039 1.161 - R Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 - .500 .500 .500 .500 .500 .500 .500 .500 .500 - L4 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 - G L O for flange - min Backnut 01 Straight cable clamp 02 1.358 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 - min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 - .125 .187 .291 .351 .501 .518 .581 .644 .706 - Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 - .204 .286 .416 .476 .623 .706 .831 .956 1.081 - T Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 - .752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 - U Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 - .886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 - L5 Max 45.80 48.65 51.80 51.80 55.00 61.35 64.80 67.70 70.90 - 1.803 1.915 2.039 2.039 2.165 2.415 2.551 2.665 2.791 - S 137 8533 Series Square flange receptacle type 0 classes WS - RS - AS - KS - ES with backshells Aluminum backshells Thread as plug (DIM.B) O for flange Backnut 31 Straight cable clamp 52 Elbow cable clamp 51 O for flange Stainless steel backshells shell size 08 10 12 14 16 A Max 14.27 17.48 22.22 23.83 26.97 .562 .688 .875 .938 1.062 B Max 18.35 18.35 18.35 18.35 .722 .722 .722 .722 C Max 1.45 1.45 1.45 1.45 .057 .057 .057 .057 .057 .057 .057 .057 .057 .057 D Max 12.66 15.84 19.02 22.19 25.36 26.95 30.12 33.30 36.47 44.41 .498 .624 .749 .874 .998 1.061 1.186 1.311 1.436 1.748 E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 F Max 20.75 23.95 26.31 28.69 31.88 34.24 36.63 39.80 43.38 50.83 .817 .943 1.036 1.130 1.255 1.348 1.442 1.567 1.708 2.001 G 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562 H Max 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.90 3.90 .122 .122 .122 .122 .122 .122 .122 .122 .154 .154 J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 .616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 - K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 - .266 .370 .504 .581 .707 .785 .909 1.035 1.593 - L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 - .506 .506 .506 .506 .506 .506 .506 .506 .506 - L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 - O for flange Straight cable clamp 02 22 24 28 30.18 33.32 36.53 39.67 1.188 1.312 1.438 1.562 1.811 18.35 18.35 18.35 18.35 18.35 18.35 .722 .722 .722 .722 .722 .722 1.45 1.45 1.45 1.45 1.45 1.45 45.99 - 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 - 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .518 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 - .752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 - P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 - .892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 - L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 - 1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 - Q Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 - .807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 - min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 - .126 .187 .291 .350 .502 .518 .581 .644 .707 - Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 - .205 .285 .417 .476 .626 .705 .831 .957 1.083 - S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 - 1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 - L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 - 2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 - T Max 15.20 18.30 39.50 - .598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 - U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 - .295 .382 .508 .587 .711 .789 .921 1.039 1.161 - V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 - .500 .500 .500 .500 .500 .500 .500 .500 .500 - L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 - 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 - min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 - .125 .187 .291 .351 .501 .518 .581 .644 .706 - Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 - .204 .286 .416 .476 .625 .706 .831 .956 1.081 - X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 - .752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 - Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 - .886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 - L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 - 1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 - R W 138 20 min M Backnut 01 18 21.50 24.70 28.10 29.60 32.90 36.00 8533 Series Jam nut receptacle type 7 classes WS - RS - AS - KS - ES with backshells Thread as plug (DIM.B) Aluminum backshells O for flange Backnut 31 Straight cable clamp 52 shell size A Max 14.27 .562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562 B Max 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 .781 .781 .781 .781 .781 .781 .781 .781 .781 min 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 Max 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 .062 .062 .062 .062 .062 .062 .062 .062 .062 E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 F Max 27.38 30.28 35.05 38.51 41.68 44.86 49.63 52.78 55.42 1.078 1.192 1.380 1.516 1.641 1.766 1.954 2.078 2.182 G Max 24.89 28.04 32.79 35.33 38.51 41.68 44.86 49.63 52.81 .980 1.104 1.291 1.391 1.516 1.641 1.766 1.954 2.079 H Max 21.06 24.23 29.01 30.61 33.76 36.96 40.11 43.31 46.46 .829 .954 1.142 1.205 1.329 1.455 1.579 1.705 1.829 J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 .616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 K 6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 .266 .370 .504 .581 .707 .785 .909 1.035 1.593 L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 .506 .506 .506 .506 .506 .506 .506 .506 .506 L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 min M Max 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 D Elbow cable clamp 51 O for flange Stainless steel backshells O for flange Backnut 01 Straight cable clamp 02 08 10 12 17.47 22.22 14 16 18 20 22 24 23.82 26.97 30.18 33.32 36.53 39.67 .126 .187 .291 .350 .502 .518 .581 .644 .707 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 .205 .285 .417 .476 .626 .705 .831 .957 1.083 N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 .752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 .892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 O Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 .807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 .126 .187 .291 .350 .502 .518 .581 .644 .707 Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 .205 .285 .417 .476 .626 .705 .831 .957 1.083 S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50 .598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 .295 .382 .508 .587 .711 .789 .921 1.039 1.161 V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 .500 .500 .500 .500 .500 .500 .500 .500 .500 L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 min 3.18 4.75 8.91 12.72 13.16 14.76 16.36 17.93 .125 .187 .291 .351 .501 .354 .581 .644 .706 Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 .204 .286 .416 .476 .625 .706 .831 .956 1.081 X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 .752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 .886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 R W 7.40 139 8533 Series Panel cut-out Type 0 shell size Panel cut-out 08 10 12 14 16 18 20 22 24 28 A min 15.80 18.70 23.40 24.90 28.30 31.10 34.50 37.50 40.60 48.00 .622 .736 .921 .980 1.114 1.224 1.358 1.476 1.598 1.890 E 15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67 .594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562 J 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.80 3.80 .126 .126 .126 .126 .126 .126 .126 .126 .150 .150 C Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 D Max 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 .125 shell size 08 10 J 16.00 .630 Type 7 H K Max 12 14 16 18 20 22 24 19.17 23.92 25.52 28.70 31.87 35.05 38.22 41.40 .755 .942 1.005 1.130 1.255 1.380 1.505 1.630 15.24 18.41 23.16 24.76 27.94 30.99 34.16 37.33 40.51 .600 .725 .912 .975 1.100 1.220 1.345 1.470 1.595 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 .125 .125 .125 .125 .125 .125 .125 .125 .125 Dimensions Hermetic receptacle Type 1Y/1YE Panel cut-out shell size A Max B Max C Max D Max E Max F Max G Max OJ min 08 1.45 22.05 18.45 14.29 18.12 12.70 26.50 12.96 .057 .868 .726 .563 .713 .500 1.043 .510 10 1.45 22.05 18.45 17.46 21.52 14.25 26.50 14.53 .057 .868 .726 .687 .847 .561 1.043 .572 12 1.45 22.05 18.45 22.22 26.57 19.05 26.50 19.30 .057 .868 .726 .875 1.046 .750 1.043 .760 14 1.45 22.05 18.45 23.81 27.82 20.60 26.50 20.88 .057 .868 .726 .937 1.095 .811 1.043 .822 16 1.45 22.05 18.45 26.99 30.92 23.79 26.50 24.05 .057 .868 .726 1.063 1.217 .937 1.043 .947 18 1.45 22.05 18.45 30.16 34.22 26.95 26.50 27.23 .057 .868 .726 1.187 1.347 1.061 1.043 1.072 20* 1.45 22.05 18.45 33.34 37.22 30.12 26.50 30.40 .057 .868 .726 1.313 1.465 1.186 1.043 1.097 22 1.45 22.05 18.45 36.51 40.62 33.30 26.50 23.58 .057 .868 .726 1.437 1.599 1.311 1.043 .928 24* 1.45 22.05 18.45 39.69 43.62 36.47 26.50 36.70 .057 .868 .726 1.563 1.717 1.436 1.043 1.445 * Consult us 140 8533 Series Hermetic receptacle type 2Y/2YE Panel cut-out 4 holes OG shell size A Max B Max C Max D Max E Max F Max G Max H Max J Max K 08 1.45 18.35 22.05 14.29 12.70 26.50 3.00 20.75 15.09 15.09 .057 .722 .868 .563 .500 1.043 .118 .817 .594 .594 18.35 22.05 17.46 14.25 26.50 3.00 23.95 18.26 18.26 12 1.45 .057 1.45 .057 .722 .868 .875 .750 1.043 .118 1.036 .812 .812 .126 .125 .125 .925 14 1.45 18.35 22.05 23.81 20.60 26.50 3.00 28.69 23.01 23.01 3.20 3.18 3.18 25.10 .057 .722 .868 .937 .811 1.043 .118 1.130 .906 .906 .126 .125 .125 .988 16 1.45 18.35 22.05 26.99 23.79 26.50 3.00 31.88 24.61 24.61 3.20 3.18 3.18 28.30 .057 .722 .868 1.063 .937 1.043 .118 1.255 .969 .969 .126 .125 .125 1.114 18 1.45 18.35 22.05 30.16 26.95 26.50 3.00 34.24 26.97 26.97 3.20 3.18 3.18 31.40 .057 .722 .868 1.187 1.061 1.043 .118 1.348 1.062 1.062 .126 .125 .125 1.236 20* 1.45 18.35 22.05 33.34 30.12 26.50 3.00 36.63 29.36 29.36 3.20 3.18 3.18 34.60 .057 .722 .868 1.313 1.186 1.043 .118 1.442 1.156 1.156 .126 .125 .125 1.362 22 1.45 18.35 22.05 36.51 33.30 26.50 3.00 39.80 31.75 31.75 3.20 3.18 3.18 37.80 .057 .722 .868 1.437 1.311 1.043 .118 1.567 1.250 1.250 .126 .125 .125 1.488 24* 1.45 18.35 22.05 39.69 36.47 26.50 3.80 43.38 34.92 34.92 4.00 3.18 3.18 40.90 .057 .722 .868 1.563 1.436 1.043 .150 1.708 1.375 1.375 .157 .125 .125 1.610 10 M N Max P min 3.20 3.18 3.18 15.70 .126 .125 .125 .618 3.20 3.18 3.18 18.90 L .722 .868 .687 .561 1.043 .118 .943 .719 .719 .126 .125 .125 .744 18.35 22.05 22.22 19.05 26.50 3.00 26.31 20.62 20.62 3.20 3.18 3.18 23.50 * Not industrialized Hermetic receptacle type 7Y/7YE Panel cut-out shell size A Max B Max C Max D Max E Max F Max G Max H J K Max 08 2.60 26.50 19.52 14.29 27.35 24.85 20.12 15.24 16.00 3.17 .102 1.043 .769 .563 1.077 .978 .792 .600 .630 .125 10 2.60 26.50 19.52 17.46 30.24 28.00 24.20 18.41 19.17 3.17 .102 1.043 .769 .687 1.191 1.102 .953 .725 .755 .125 12 2.60 26.50 19.52 22.22 35.01 32.75 28.95 23.16 23.92 3.17 .102 1.043 .769 .875 1.378 1.289 1.140 .912 .942 .125 14 2.60 26.50 19.52 23.81 38.46 35.29 30.30 24.76 25.52 3.17 .102 1.043 .769 .937 1.514 1.389 1.193 .975 1.005 .125 16 2.60 26.50 19.52 26.99 41.64 38.46 33.45 27.94 28.70 3.17 .102 1.043 .769 1.063 1.639 1.514 1.317 1.100 1.130 .125 18 2.60 26.50 19.52 30.16 44.81 41.64 34.64 30.99 31.87 3.17 .102 1.043 .769 1.187 1.764 1.639 1.364 1.220 1.255 .125 20* 3.35 26.50 19.52 33.34 49.60 44.86 39.80 34.16 35.05 3.17 .132 1.043 .769 1.313 1.953 1.766 1.567 1.345 1.380 .125 22 3.35 26.50 19.52 36.51 52.74 49.59 43.00 37.33 38.22 3.17 .132 1.043 .769 1.437 2.076 1.952 1.693 1.470 1.505 .125 24* 3.35 26.50 19.52 39.69 55.40 52.81 46.15 40.51 41.40 3.17 .132 1.043 .769 1.563 2.181 2.079 1.817 1.595 1.630 .125 * Not industrialized 141 8533 Series Protective caps cap for plug Tooling crimping Aluminum version cap for receptacle contact sizes 20 16 12 Insertion and extraction of wired contacts disposable plastic tool : * colored tip for insertion * white tip for extraction Extraction of unwired contacts Filler plug these filler plugs are installed at the rear of unwired contacts to maintain connector sealing wires mm2 0.93 0.60 0.38 0.21 1.91 1.34 0.93 0.60 0.38 3.18 1.91 contact sizes 20 16 12 Two, three or four holes self locking fixing plates, see page 126. 142 A Max B Max 08 3.20 134.00 .126 5.276 10 3.20 134.00 .126 5.276 12 3.20 134.00 .126 5.276 14 3.20 134.00 .126 5.276 16 3.20 134.00 .126 5.276 18 3.20 134.00 .126 5.276 22 3.20 134.00 .126 5.276 part numbers crimping pliers contact sizes 20 16 12 locator 8365 (M 22520 / 1-01) or 8476-01 (M 22520 / 2-01) 8365-02 (M22520 / 1-02) or 8476-02 (M22520 / 2-02) 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02) 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02) part numbers (M 81969-14-11) 8522-20 (M 81969-14-03) 8522-16 (M 81969-14-04) 8522-12 contact sizes 20 16 12 * for class 200C only Reusable fixing plate AWG 18 20 22 24 14 16 18 20 22 12 14 shells colour red blue yellow part numbers 8522-56 8522-57 8522-58 part numbers 8522-389 A*/MS 27488-20 8522-390 A/MS 27488-16 8522-391 A/MS 27488-12 colour red blue yellow