TaNFilm(R) Precision Chip ResistorsDivider Voltage TaNFilm(R) Precision Chip Voltage Divider PFC Divider Series * Popular 1206 Chip Size * 5 to 150K per resistor * Tested for COTS applications * Superior alternative to matched sets PFC Divider Series * Standard Sn/Pb and 100% tin (Pb-free) terminations available Popular 1206 Chip Size 10 to 150K per resistor IRC now has a perfect voltage divider solution. Designed around the 1206 sized chip, for COTS the Tested PFC Divider seriesapplications provides a single package solution that is compatible with your automatic placement equipment. The ratiosets tolerance can be specified down to 0.05%* which is much tighter than the 0.2% achievable Superior alternative to matched from two individual 0.1% chip resistors. Similarly, the TCR tracking of 5 ppm/C is far superior to the tracking obtainable from two Standard Sn/Pb chip and resistors. 100% tin IRC's (Pb-free) terminations available (R) individual 25 ppm/C TaNFilm Tantalum Nitride film system provides superior environmental performance while insuring long term life stability. All Pb-free of parts comply with EU Directive 2011/65/EU by (EU)while 2015/863 (RoHS3) This dual element, monolithic package offers the advantages reducing component quantities andamended board space increasing quality and reliability. (R) PFC Dividers. For precision voltage divider network a small solution, specify component IRC TaNFilmquantities Thisa dual element, monolithic packageinoffers thepackage advantages of reducing and board space while increasing quality and reliability. The ratio tolerance can be specified down to 0.01%, which is much tighter than the 0.1% achievable from two individual 0.05% chip resistors. Similarly, the TCR tracking of 5 ppm/C is far superior to the 50ppm/C tracking obtainable from two individual 25 ppm/C chip resistors. The TaNFilm(R) Tantalum Nitride film system provides superior environmental performance while ensuring long term stability. Electrical Data Characteristic Resistance Range Power Rating Each Resistor Total Resistance 10 - 150K 200K 125mW 250mW Absolute TCR to 25ppm/C* Tracking TCR to 5ppm/C* Maximum Voltage Rating 100 volts Operating Temperature Range -65C to +150C Noise Less than -25 db TaNFilm(R) Precision Chip Voltage Divider Termination 60/40 Sn/Pb or 100% tin (Pb-free) *Tighter Tolerance and Higher Resistance value available. Contact factory for more information Manufacturing Capability Range of Lowest Resistor Available Absolute Tolerances Available Ratio Tolerances Best Absolute TCR Best Tracking TCR 10 - 24 F FD 100ppm/C 50ppm/C IRC reserves the right to 25 - make 50changes in product specification without F Dnotice B or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. FDB 50ppm/C 20ppm/C 51 - 75 F Street D B* Corpus Christi Texas 78411 USA (c) IRC Advanced Film Division * 4222 South Staples FDB 25ppm/C TT electronics plc 10ppm/C General Note Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of PFC Series Issue January 2009 Sheet 1 of 3 76 - 999 FDB FDBA 25ppm/C 5ppm/C 1.0K - 100K FDBA FDBAQT 25ppm/C 5ppm/C General Note Packaging Data TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. PACKAGING ON 8mm TAPE BI Technologies IRC Welwyn www.ttelectronics.com/resistors (c) TT Electronics plc 06.18 TaNFilm(R) Precision (R) Chip TaNFilm Voltage Divider Precision Chip PFC Divider Series Divider Voltage Physical Data TaNFilm(R) Precision Chip Voltage Divider TaNFilm(R) Precision Chip Physical Data Voltage Divider TOP SIDE 0.063" .005" 0.024" 0.004" R2 Recommended Solder Pad BOTTOM 0.0895" 0.058" .005" 0.0725" 0.015" 0.005" 0.027" 0.003" TOP SIDE Manufacturing Capability Recommended Solder Pad BOTTOM 0.126" 0.006" 0.180" 0.035" 0.0895" R1 Range of Available 0.063" .005" 0.024" 0.004" Lowest Resistor Absolute Tolerances Available 0.058" .005" Ratio Tolerances 0.030" min Best Absolute TCR Best Tracking TCR 0.0225" 0.050" 100.015 "-0.005 24 " F FD 0.010" 0.004" R2 25 - 50 FDB Dimensions are in inches 51 - 75 FDB 0.027" 0.003" FDB FDB R1 1.0K - 100K FDBA 0.015" 0.005" 0.0725" 50ppm/C 50ppm/C 20ppm/C 0.058" 0.126" 0.006" 76 - 999 FDB 100ppm/C FDBA FDBAQT 0.030" min 0.0315" 25ppm/C 10ppm/C 0.035" 25ppm/C 5ppm/C 0.180" 0.0225" 25ppm/C 5ppm/C 0.050" 0.015" 0.005" Packaging Data 0.010" 0.004" Dimensions are in inches 0.058" PACKAGING Data ON 8mm TAPE Environmental 0.0315" Method R/R Ratio MIL-STD-202 -65 to +125C, 5 Cycles .02% .005% Short Time Overload MIL-PRF-55342 .02% .005% USER DIRECTION High Temperature ExposureOF FEED MIL-PRF-55342 .03% .01% Resistance to Bond Exposure MIL-PRF-55342 .01% .01% MIL-STD-202 10 Cycles, 240 hours 10% Rated Power .03% .02% Method MIL-PRF-55342 B 70C, 1000 hours .03% R/R Ratio .01% .02% .01% .005% .005% Test Thermal Shock Moisture Resistance Environmental Ordering Data Data Load Life (Rated Power) Prefix Thermal Model Test PFC - D1206 - 03 - 1003 - 3301 - F Shock Low- Divider Temperature Operation D1206 network w/ standard Sn/Pb termination D1206LF - Divider network w/ 100% tin, Pb-free termination Short Time Overload MIL-STD-202 MIL-PRF-55342 -65 to +125C, 5 Cycles MIL-PRF-55342 .02% .005% 01High = 100ppm/C; 02 = 50ppm/C; 03 = 25ppm/C Temperature Exposure MIL-PRF-55342 .03% .01% Resistance to Bond R1 Resistance Code MIL-PRF-55342 .01% .01% MIL-STD-202 10 Cycles, 240 hours 10% Rated Power .03% MIL-PRF-55342 70C, 1000 hours .03% .01% MIL-PRF-55342 .01% .005% TCR Code* Exposure Standard 4-Digit resistance code. Ex: 1002 = 10K;Resistance 50R0 = 50 Moisture R2IRC Resistance Code (c) Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Standard 361 4-Digit resistance code Telephone: 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com Absolute Tolerance* Load Life F = 1%; D = 0.5%; B = 0.1%; A = 0.05% (Rated Power) Ratio Tolerance* Low Temperature Operation F = 1%; D = 0.5%; B = 0.1%; A = 0.05%, Q = 0.02%, T = 0.01% *General For tighterNote tolerance and tighter TCR requirements, please refer to IRC's Ultra Precision datasheet. TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. .02% PFC Series Issue January 2009 Sheet 2 of 3 BI Technologies IRC Welwyn www.ttelectronics.com/resistors (c) TT Electronics plc (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com 06.18 PFC Series Issue January 2009 Sheet 2 of 3 This dual element, monolithic package offers the advantages of reducing component quantities and board space while increasing TaNFilm Precision Chip quality and (R)reliability. The ratio tolerance can be specified down to 0.01%, which is much tighter than the 0.1% achievable from two individual 0.05% chip resistors. Similarly, the TCR tracking of 5 ppm/C is far superior to the 50ppm/C tracking obtainable Voltage Divider (R) from two individual 25 ppm/C chip resistors. The TaNFilm Tantalum Nitride film system provides superior environmental performance while ensuring long term stability. PFC Divider Series Ordering Procedure This product has two valid part numbers: European (Welwyn) Part Number: D120602-1K0-3K3FB (50ppm/C, R1=1 kilohm, R2=3.3 kilohms, absolute tolerance 1%, ratio tolerance 0.1%, Pb-free) D 1 2 1 1 0 6 0 2 2 3 2 3 - 1 K 0 - 3 K 4 3 5 4 F B 6 7 5 6 Absolute Type Size Absolute TCR Value R1 Value R2 Tolerance D=PFC- 1206 Omit for 25ppm/C E24 = 3/4 characters A = 0.05% Divider 02 = 50ppm/C E96 = 3/4 characters B = 0.1% R = ohms 01 = 100ppm/C D = 0.5% K = kilohms F = 1% 8 7 8 Ratio Termination & Tolerance Packing T = +0.01% Omit for Pb-free, Standard pack Q = 0.02% A = 0.05% PB = SnPb finish, Standard pack B = 0.1% D = 0.5% 1000/reel F = 1% USA (IRC) Part Number: PFC-D1206LF-02-1001-3301-FB (50ppm/C, R1=1 kilohm, R2=3.3 kilohms, absolute tolerance 1%, ratio tolerance 0.1%, Pb-free) P F C - D 1 1 1 2 0 6 L 2 2 3 F 3 - 0 2 - 1 4 4 5 6 Value Value Family Model Termination Absolute TCR R1 R2 PFC D1206 Omit for SnPb 03 = 25ppm/C 3 digits + multiplier (60/40) 02 = 50ppm/C R = ohms for LF = Pb-free 01 = 100ppm/C values <100 ohms (100%Sn) General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. 0 0 1 5 - 3 3 0 1 6 7 Absolute Tolerance A = 0.05% B = 0.1% D = 0.5% F = 1% - F B 7 8 8 Ratio Packing Tolerance T = +0.01% 1000/reel Q = 0.02% A = 0.05% B = 0.1% D = 0.5% F = 1% BI Technologies IRC Welwyn www.ttelectronics.com/resistors (c) TT Electronics plc 06.18