CUSTOMER DRAWING
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR,
LOW TEMPERATURE, RoHS COMPLIANT
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
© 2005-2018 TE Connectivity Corporation. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX. Qty: see table
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROL0 per ANSI / J-STD-004.
3. MELTABLE RINGS: Stabilized thermoplastic. Color: size 1 to 5 = blue, size 7 & 8 = one blue and one clear.
APPLICATION
1. These parts are designed to provide an environment protected shield terminations on cables, rated for 105C minimum,
meeting the dimensional criteria listed, having tin or silver-plated shields.
2. When installed per Tyco Electronics / Raychem process standard RCPS-100-70, assemblies will meet requirements of Tyco
Electronics / Raychem Specification RT-1404.
3. Temperature range: -55C to +125C.
For best results, prepare the cable as shown:
TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks