Preliminary Technical Data iSensorTM Inclinometer/Accelerometer Evaluation Board ADIS1620x/PCB GENERAL DESCRIPTION The ADIS1620x/PCBs are simple evaluation boards that provide convenient access to the ADIS1620x family of products, using a standard 2 mm, 2 x 6, connector interface. These connectors can be accessed using a variety of cable options, including standard 1 mm ribbon cables. The ADIS1620x/PCB is designed to be evaluated in an existing digital platform (such as MCU, DSP, FPGA, PLD) or as part of the ADISEVAL system. Four mounting holes (sized for 2-56 or 2 mm screws) have been provided to secure the board during evaluation. CIRCUIT DESCRIPTION The schematic, layout, and parts list for the ADIS1620x/PCB can be found in Figure 1, Figure 1. ADIS1620x/PCB Schematic Figure 2, and Table 1. The ADIS1620x's digitized outputs can be accessed using the 4-wire serial port interface (SPI) signals on J1: SCLK, CS, DOUT, and DIN. For specific information on using the ADIS1620x SPI interface, refer to the ADIS16201 data sheet. Auxiliary functions, such as the 12-bit ADC input, can be accessed using J2. C1 provides additional power supply filtering but is generally not required. Table 1. Parts List Reference Designator U1 J1, J2 C1 1 Part Description ADIS1620xyCCZ1 12-pin, dual row, 2 mm connector Power supply filtering, not installed x = 0, 1, 2, 3, 4 or 9, y = B or C SPECIAL NOTES ON HANDLING Note that the ADIS1620x/PCB is not reverse-polarity protected. Reversing the power supply or applying inappropriate voltages (that is, voltages outside the Absolute Maximum Ratings in the ADIS1620x data sheets) to any pin may damage the ADIS1620x/PCB. Figure 2. ADIS1620x/PCB Layout (Top View) Table 2. Power Supply Levels Parameter VCC Range 3.0 V to 3.6 V Rev. PrA Evaluation boards are only intended for device evaluation and not for production purposes. Evaluation boards as supplied "as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. No license is granted by implication or otherwise under any patents or other intellectual property by application or use of evaluation boards. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Analog Devices reserves the right to change devices or specifications at any time without notice. Trademarks and registered trademarks are the property of their respective owners. Evaluation boards are not authorized to be used in life support devices or systems. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2007 Analog Devices, Inc. All rights reserved. Preliminary Technical Data 1.100 ADIS1620x/PCB 1.050 a 2x0.925 J1 * * U1 2x0.673 J2 i SensorTM 4xO0.087 M2X0.4 C1 2x0.000 0.865 2x0.900 0.035 2x0.000 0.200 0.150 Figure 3. ADIS1620x/PCB Mechanical Drawing ORDERING GUIDE Model ADIS16201/PCBZ ADIS16202/PCBZ ADIS16203/PCBZ ADIS16204/PCBZ ADIS16209/PCBZ 1 ESD CAUTION Description Evaluation Board Evaluation Board Evaluation Board Evaluation Board Evaluation Board Z = RoHS Compliant Part. (c)2007 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. PR07107-0-10/07PrA) Rev.PrA | Page 2 of 2