Amphenol Heavy Duty
Cylindrical Connectors
12-052-9
®
Amphenol
Inside Cover is Blank
Table of Contents Page
Amphenol® Heavy Duty Cylindrical Connectors, MIL-C-22992/Proprietary
Design Characteristics, Environmental Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Heavy Duty Cylindrical Connectors
MIL-C-22992, Class L
General Information, Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Alternate Insert Rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MS90555 Wall Mount Receptacle (power source) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MS90556 Straight Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MS90557 Cable Connecting Receptacle without coupling ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MS90558 Wall Mount Plug with coupling ring (equipment end) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accessories - Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Accessories - Contact Bushing/Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Accessories - Cable Strain Relief/Cable Sealing Gland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Accessories - Protective Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-19
Heavy Duty Cylindrical Connectors
MIL-C-22992, QWLD
General Information, Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MIL-C-22992, QWLD Insert Arrangement Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
QWLD Special Insert Arrangement Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Alternate Insert Rotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
MIL-C-22992, QWLD Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-38
QWLD Special Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-47
QWLD Thermocouple Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-52
MS17343 or 10-1940XX Wall Mount Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
MS17345 or 10-1941XX Cable Connecting Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
MS17346 or 10-1942XX Box Mount Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
MS17347 or 10-1943XX Jam Nut Receptacle (Wall Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
10-1944XX Thru-Bulkhead Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
MS17344 or 10-1946XX Straight Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
MS17348 or 10-1949XX Jam Nut Receptacle (Box Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Accessories - M85049/X or 10-522958 Cable Sealing Adapters (Plug) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-63
Accessories - M85049/X or 10-524959 Cable Sealing Adapters (Receptacle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-67
Accessories - Cable Clamp, Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 69
Accessories - Protective Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70, 71
Accessories - Sealing Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Accessories - Encapsulation Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Accessories - Encapsulation End Bell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
MS Solder Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Solderless Crimp Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Application Tools (Crimp Type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Heavy Duty Cylindrical Connectors
Proprietary, QWL Series
General Information, Design Features, (References Amphenol Catalog 12-053) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Sales Office Listing
Amphenol Aerospace is a Certified ISO 9001 Manufacturer
This catalog covers Amphenol® Heavy Duty/ Power Con-
nectors covered by MIL-C-22992.
The first section covers Class L Power Connectors, com-
plete with insert arrangements, accessories and assem-
bly instructions.
The second part covers our QWLD Heavy Duty Connec-
tors. This second part is made up of 3 sections, including
QWLD insert arrangements, connector shell styles and
accessories.
If more information is needed concerning our Heavy
Duty/Power Connectors, please contact:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5157
This catalog and other product literature from Amphenol
Aerospace and Amphenol Industrial Operations can be
viewed, saved, and down-loaded from our website:
www.amphenol-aerospace.com.
Due to space limitations, metric equivalents of dimensional data in this
catalog have not been included. All dimensions given may be converted
to the metric system by the standard formula; Dimension (inches) x
25.40 = dimension (millimeters).
1
High Current Capacity
Rugged Construction
Safety
Serviceability
Amphenol meets the demands for heavy duty connectors by
providing three cylindrical connector series, each with unique
design characteristics for reliable operation in specific indus-
trial environments.
Class “L” – for the heaviest electrical loads (Pages 2 – 19)
Current range from 40 to 200 amperes
Direct current or single/three phase, 60/400 Hertz alternat-
ing current
Automatic grounding for safety
MIL-C-22992 qualification
QWLD – for most power and control circuits (Pages 21 – 77)
Military (MIL-C-22992) qualified connectors and industrial
equivalents available
Increased shell size for greater durability than similar stan-
dard connectors
QWL – a more compact heavy duty design for industrial power and control applications
(Page 78, references Amphenol Catalog 12-053)
These three series share the following common characteristics which are critical to reliable heavy
duty connectors:
Resistance to the operating environment. Refer to environmental data, below.
Double stub coupling threads for faster connections; no cross threading, easy cleaning.
Left hand accessory threads to minimize cable twisting, wire breakage, accidental connector
disassembly.
Gaskets or O-rings at appropriate surfaces for perfect weathertight connections.
Amphenol® heavy duty connectors have been exposed to the following environmental conditions,
without compromise of mechanical integrity or degradation of electrical performance.
Condition Configuration Description Reference
Thermal Shock Unmated Five complete one hour temperature cycles of
–55°C to +125°C
MIL-STD-1344, method
1003, test condition A
Moisture Resistance
(Cable mounted connectors) Mated Ten complete 24 hour cycles of +25°C to
+65°C temperature at 90% to 98% humidity MIL-STD-202, method 106
Durability Mated 500 complete mating/unmating cycles MIL-C-22992
Salt Spray
(Corrosion) Unmated 48 hour exposure to atomized 5%
saline solution at +35°C
MIL-STD-1344,
method 1001
Vibration Mated
10 to 55 Hz, .06 inch total excursion
in 1 minute cycles for 6 hours, 55 to
2000 Hz, 10G peak amplitude sweep
MIL-STD-1344,
method 2005
High Impact Mated Nine hammer blows from 1, 3 and 5 feet,
three each in three axes on mounting panel
MIL-STD-202,
method 207
Heat Rise (Class L only) Mated Maximum rated DC current for four
hours at +25°C in still air MIL-C-22992
Fluid Immersion Unmated 20 hours immersion in hydraulic
fluid and lubricating oil MIL-C-22992
Water Immersion Mated and
Unmated
4 hours immersion at 1 atmosphere
pressure differential MIL-C-22992
Amphenol Heavy Duty
Cylindrical Connectors
MIL-C-22992/Proprietary
®
2
Amphenol Heavy Duty
Cylindrical Connectors
MIL-C-22992, Class L
wall mount receptacle (power source)
straight plug
cable connecting receptacle without
coupling ring
wall mount plug with
coupling ring (equipment end)
The Amphenol® Class L* heavy
duty connectors are the largest
size cylindricals, highly suitable for
industrial or military applications,
and designed to meet the demands
of heavy power interconnections.
The design features of this connec-
tor series provide:
Greatest Capacity -
current ranges 40 to 200 amps,
conductor sizes 6 to 4/0
Safety -
complete protection of personnel
and equipment if connectors are
inadvertently disconnected under
load
Foolproof Mating -
design incorporates specific volt-
age, current, frequency, phase and
grounding requirements
Standardization -
MIL-C-22992 Class L insert
arrangements specify connector/
cable combinations for maximum
reliability
Serviceable Contacts -
contacts are normally crimped to
the cable before connector assem-
bly. No insertion tools required.
Bushings are available to adapt
smaller diameter wires to larger
contacts
* Amphenol design is covered by one or more of the
following U. S. Patent Numbers:
3,023,396; 3,221,292.
®
3
Amphenol Heavy Duty
Cylindrical Connectors
MIL-C-22992, Class L
Class L connectors are available only in the specific con-
figurations prescribed by MIL-C-22992 for either military
or industrial applications. This rigid configuration control
assures correct interconnection of electrical circuits for
maximum safety and reliability. Controlled parameters
include:
Connector shell style and contact type - wall mount
and cable connecting receptacles are supplied with
socket contacts only and always lead from the power
source. Plugs (with coupling rings) have pin contacts only
and always lead to the equipment end.
Shell size - the direct relationship of shell size to current
carrying capability reduces the possibility of inadequate
wiring for heavy electrical loads.†
Keyway position - four positions of the main keyway are
used to discriminate between the following power
sources:
two wire D.C
two wire single phase A.C.
three wire single phase A.C.
four wire three phase A.C.
Insert rotation - when carrying alternating current (A.C),
different angular rotations of the insert within the connec-
tor shell are used to distinguish between 60 Hertz and
400 Hertz circuits.
Shell Size
Current Rating
(Amperes) Contact Size
28 40 6
32 60 4
44 100 1/0
52 200 4/0
Other outstanding design features:
Arc quenching design - recessed socket contacts within
the insert create an arc suppressing chamber which pro-
tects the user when connectors are separated under
load.
Programmed coupling sequence - grounding and neu-
tral contacts engage before power contacts.
Waterproof design - a unique combination of grommets
and seals provides waterproofing in any condition -
mated or unmated, capped or uncapped.
Rugged construction - machined from high strength
aluminum. Straight-line attachment of accessories elimi-
nates possibility of cable twisting or misalignment.
Accessories - supplied with all Class L connectors as
indicated on the individual connector descriptions.
Replacement accessories may be ordered separately.
See pages 12 through 15.
MIL-C-22992 includes shell size 48, rated at 150 amperes. Consult your local
Amphenol sales representative or Amphenol, Sidney, NY for availability.
®
4
MIL-C-22992, Class L
how to order
Connectors are supplied with removable contacts unassembled and applica-
ble accessories as listed in the individual connector style descriptions,
pages 8 through 11. Additional/replacement contacts or accessories may be
ordered by their MS designations.
Connectors are ordered by MS designation. To illustrate the ordering proce-
dure, part number MS90555 C32412SY is shown as follows:
PART NUMBER
MS90555 C32 412 S Y
1 234567
1. MS Number -
MS90555 designates wall mount receptacle (power source)
MS90556 designates straight plug
MS90557 designates cable connecting receptacle without coupling ring
MS90558 designates wall mount plug with coupling ring (equipment end)
2. Shell Finish - C (conductive) for AC or N (nonconductive) for DC circuits.
Grounding Assemblies: Finish C
Shell
Size
Current
Rating
Amps
Shell Master Key/Keyway Position
60Hz & 400Hz
1 Phase 3 Phase
2 Wire 3 Wire 3 Wire 4 Wire
120 VAC 240 VAC
120/240
VAC
450/480
VAC
120/208
VAC
240/416
VAC
277/480
VAC
28 40 4 (120°) 5 (135°) 4 (120°) --- 4 (120°) 5 (135°) 6 (150°)
32 60 4 (120°) 5 (135°) 4 (120°) --- 4 (120°) 5 (135°) 6 (150°)
44 100 4 (120°) --- 4 (120°) 1 (60°) 4 (120°) 5 (135°) 6 (150°)
52 200 --- --- 4 (120°) --- 4 (120°) 5 (135°) 6 (150°)
3. Shell Size - related directly to current carrying capability.
Size 28 - 40 amperes
Size 32 - 60 amperes
Size 44 - 100 amperes
Size 52 - 200 amperes
4. Master Key/Keyway Position - N designates normal position. Positions
1, 4, 5 and 6 of the master key/keyway prevent cross-mating of incompat-
ible voltages. Refer to the adjacent illustration.
5. Insert Arrangement - determined by connector size (current carrying
capability) and cable configuration to be accommodated. Refer to pages 5
& 6.
6. Contact Type - P for pin, S for socket. MS90555 and MS90557 are sup-
plied with socket contacts only. MS90556 and MS90558 are supplied with
pin contacts only.
7. Alternate Insert Rotation - used to prevent cross-mating of incompatible
frequencies. Absence of a letter in this space indicates normal (0°) posi-
tion of the insert. Refer to page 7.
Non-grounding Assemblies: Finish N
Shell
Size
Current
Rating
Amps
Shell Master/Key
Keyway Position
DC
2 Wire
28 VDC
28 40 N (105°)
32 60 N (105°)
44 100 N (105°)
52 200 N (105°)
4
5
6
N
Normal
1
MASTER
KEYWAY
TYPICAL
SOCKET
ARRANGEMENT
15
REF
front face of receptacle shown
Note that insert arrangement does not
rotate with master key/keyway
MASTER KEY/KEYWAY POSITION
Amphenol Federal Vendor Identification
FSCM77820
5
MIL-C-22992, Class L
contact arrangements
Shell Size 28, 40 amp rating Cable:
Contacts:
28-12 IPCEA, type G, round, four #8 conductors
28-13 CO-04 HDF, (4/6-4/12R) 1090
per MIL-C-3432
Position Size Pin
M39029/48
Socket
M39029/49
A, B, C 6-317 -329
N, G 6N -318 -329
28-12, 28-13
Three phase AC, 4 wire, grounding
Shell Size 32, 60 amp rating
32-04, 32-05
Single phase AC, 2 wire, grounding
Cable:
Contacts:
32-04 IPCEA, type G, round, two #6 conductors
32-05 CO-02 HDF, (2/4-2/8R) 1100
per MIL-C-3432
Position Size Pin
M39029/48
Socket
M39029/49
A 4 -320 -331
N 4N -321 -331
G1, G2 6N -318 -329
Shell Size 32, 60 amp rating
32-12, 32-13
Three phase AC, 4 wire, grounding
Cable:
Contacts:
32-12 IPCEA, type G, round, four #6 conductors
32-13 CO-04 HDF, (4/4-4/12R) 1290
per MIL-C-3432
Position Size Pin
M39029/48
Socket
M39029/49
A, B, C 4-320 -331
N 4N -321 -331
G 6N -318 -329
Shell Size 44, 100 amp rating
44-02, 44-03
28 Volts DC, 2 wire
Cable:
Contacts:
44-02 IPCEA, type W, round, two #2 conductors
44-03 CO-02 HDF, (2/1) 1385
per MIL-C-3432
Position Size Pin
M39029/48
Socket
M39029/49
A1/0-1 -323 -333
N1/0N-1 -324 -333
CONTACT LEGEND 64 1/04/0
IPCEA – Insulated Power Cable Engineers Association
AN
CB
G
G1
NA
G2
C
AN
B
G
A
N
6
MIL-C-22992, Class L
contact arrangements
Shell Size 44, 100 amp rating
44-12, 44-13
Three phase AC, 4 wire, grounding
Cable:
Contacts:
44-12 IPCEA, type G, round, four #2 conductors
44-13 CO-04 HDF, (4/1-4/8R) 1620
per MIL-C-3432
Position Size Pin
M39029/48
Socket
M39029/49
A, B, C 1/0-1 -323 -333
N1/0N-1 -324 -333
G1, G2, G3, G4 6G -319 -330
Shell Size 44, 100 amp rating
For Navy Ground Support Equipment use only.
44-50, 44-51, 44-52, 44-56
Three phase AC, 3 wire, grounding
Cable:
Contacts:
44-50 Available in MS90555 & MS90558 only
4 each # 1 conductors
44-51 Available in MS90556 & MS90557 only
IPCEA, type W, round, four # 1 conductors
44-52 Available in MS90556 only
IPCEA, type W, round, four # 2 conductors
44-56 Available in MS90556 only
IPCEA, type W, round, four # 6 conductors
Position Size Pin
M39029/48
Socket
M39029/49
A, B, C 1/0-1 -323 -333
G1/0N-1 -324 -333
Shell Size 52, 200 amp rating
52-12, 52-13
Three phase AC, 4 wire, grounding
Cable:
Contacts:
52-12 IPCEA, type G, round, four #4/0 conductors
52-13 CO-04 HDE, (4/0000-4/4R) 2380
per MIL-C-3432
Position Size Pin
M39029/48
Socket
M39029/49
A, B, C 4/0 -327 -335
N4/0N -328 -335
G1, G2, G3, G4 4G -322 -332
IPCEA – Insulated Power Cable Engineers Association
A
G4 G1
G3 G2
B
CN
A
GB
C
A
B
G4 G1
CN
G3 G2
CONTACT LEGEND 64 1/04/0
7
MIL-C-22992, Class L
alternate insert rotations
To avoid cross-plugging problems in applications requiring
the use of more than one connector of the same size and
arrangement, alternate insert rotations are available as
indicated in the accompanying chart.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counterclockwise the same number of degrees in
respect to the normal shell key.
Views looking into front face of pin insert or rear of socket insert.
Insert
Arrangements
Keying Position
(degrees from normal position)
DC or 60 Hz
Normal
400 Hz
WX Y Z
28-12 0 180
28-13 0 180
32-04 0 90
32-05 0 90
32-12 0 180
32-13 0 180
44-12 0 –––60
44-13 0 –––60
44-50 0 ––––
44-51 0 ––––
44-52 0 ––––
44-56 0 ––––
52-12 0 300
52-13 0 300
B
A
A
B
A
B
A
B
Position W Position X Position Y Position Z
8
J
.531
MIN
FULL
THD
F*
GN
GROMMET
GASKET
H
A
T
4 HOLES
S
R.312
+.011
–.010
.750 +.031
–.000
.031
±.005
MIL-C-22992, Class L
MS90555
wall mount receptacle (power source)
All dimensions for reference only.
To complete MS Part number see how to order, pg. 4.
Protective cover MS90563 is supplied as part of this connector assembly. Refer to page 15 for dimensions.
*F dimension applies only when rear nut is fully tightened
Shell
Size
A Thread
Class 2A
.1428P-.2857L
Double Stub
F*
±.031
G
Dia.
+.006
–.010
H
±.005
J
+.016
–.000
N
Dia.
+.011
–.020
R
(BSC)
S
+.021
–.020
T
Dia.
±.005
28 2.000 1.376 1.938 1.514 2.188 2.000 1.844 2.375 .177
32 2.250 1.376 2.188 1.514 2.188 2.250 2.062 2.625 .209
44 3.000 1.438 3.062 1.733 2.532 3.125 2.812 3.375 .281
52 3.500 1.438 3.562 1.733 2.532 3.625 3.156 3.875 .281
9
ML
"O" RING
K
MAIN JOINT
GASKET
C
Q
GLAND
.750 +.031
–.000
NE
A
MIL-C-22992, Class L
MS90556
straight plug
All dimensions for reference only.
Shell
Size
and
Arrangement
A Thread
Class 2B
.1428P-.2857L
Double Stub
C
Dia.
Max
E
Cable
Range
K
±.005
L
Max
Free
Length
M
Approx.
Free
Length
N
Dia
+.011
–.020
Q
Dia.
Max
28-12 2.000 2.439 1.047-.922 1.557 8.188 7.188 2.000 2.312
28-13 1.130-1.005 7.188
32-04
2.250 2.689
.969-.844
1.557 8.188
7.188
2.000 2.56232-05, -12 1.130-1.005 7.188
32-13 1.342-1.217 8.688
44-02
3.000 3.667
1.312-1.187
1.776 10.172
10.688
2.500 3.531
44-03 1.438-1.313 9.688
44-12 1.516-1.391 10.688
44-13 1.672-1.547 12.688
44-51
3.000 3.667
1.734-1.609
1.776 10.172
11.688
2.500 3.53144-52 1.525-1.435 11.188
44-56 1.135-1.065 7.188
52-12 3.500 4.167 2.328-2.183 1.776 11.109 17.188 3.250 4.016
52-13 2.453-2.308 18.188
To complete MS Part number see how to order, pg. 4.
Protective cover MS90564 is supplied as part of this connector assembly. Refer to page 15 for dimensions.
Contact brushings MS3348 are supplied as part of connector as required. Refer to page 13 for dimensions.
10
MIL-C-22992, Class L
MS90557
cable connecting receptacle without coupling ring
All dimensions for reference only.
To complete MS Part number see how to order, pg. 4.
Protective cover MS90563 is supplied as part of this connector assembly. Refer to page 15 for dimensions.
Contact bushings MS3348 are supplied as part of connector as required. Refer to page 13 for dimensions.
Shell
Size
and
Arrangement
A Thread
Class 2A
.1428P-.2857L
Double Stub
B
±.005
C
Dia.
Max.
E
Cable
Range
L
Max
Free
Length
M
Approx.
Free Length
N
Dia
+.011
–.020
28-12 2.000 1.514 2.439 1.047-.922 8.156 7.188 2.000
28-13 1.130-1.005 7.188
32-04
2.250 1.514 2.689
.969-.844
8.156
7.188
2.00032-05, -12 1.130-1.005 7.188
32-13 1.342-1.217 8.688
44-02
3.000 1.733 3.667
1.312-1.187
10.125
10.688
2.500
44-03 1.438-1.313 9.688
44-12 1.516-1.391 10.688
44-13 1.672-1.547 12.688
44-51 1.734-1.609 11.688
52-12 3.500 1.733 4.167 2.328-2.183 11.062 17.188 3.250
52-13 2.453-2.308 18.188
L
CM
N
E
GLAND
"O" RING
.750 +.031
–.000
B
A
.531
MIN FULL THD
11
JF
T
4 HOLES
S
R
Q
INTERFACIAL
SEAL
MAIN JOINT
GASKET
A
K
.750 +.031
–.000
.312+.011
–.010
.031
±.005
GASKET
GROMMET
NG
MIL-C-22992, Class L
MS90558
wall mount plug with coupling ring (equipment end)
To complete MS part number see how to order, pg. 4.
Protective cover MS90564 is supplied as part of this connector assembly. Refer to page 15 for dimensions.
* F dimension applies only when rear nut is fully tightened.
Shell
Size
A Thread
Class 2B
.1428P-.2857L
Double Stub
J
±.031
G
Dia
+.006
–.010
F*
+.016
–.000
K
±.005
N
+.011
–.020
Q
Dia.
Max
R
(BSC)
S
+.021
–.020
T
Dia.
±.005
28 2.000 .959 1.938 2.639 1.557 2.000 2.312 1.844 2.375 .177
32 2.250 .959 2.188 2.639 1.557 2.250 2.562 2.062 2.625 .209
44 3.000 1.021 3.062 2.998 1.776 3.125 3.531 2.812 3.375 .281
52 3.500 1.021 3.562 2.998 1.776 3.625 4.016 3.156 3.875 .281
All dimensions for reference only.
12
A
REF
B
CH
.750
+.031
–.000
G
D
K
REF
.750
+.031
–.000
J
HC
G
MIL-C-22992, Class L Accessories
contacts
All dimensions for reference only.
*Order by MS part number listed for either socket or pin.
Socket
MS Part
Number*
Pin
MS Part
Number
Contact
Size
Wire
Well
Size
A
Ref.
B
±.005
C
Dia
D
Dia
±.001
G
Dia
H
Dia
J
±.005
K
Ref
M39029/49-335 M39029/48-327 4/0 4/0 3.207 2.097 .641 +.004
–.003 .500 .781 ± .003 .750 +.004
–.003 1.283 2.393
--- M39029/48-328 4/0N 4/0 3.325 2.215 .641 +.004
–.003 .500 .781 ± .003 .750 +.004
–.003 --- ---
M39029/49-333 M39029/48-323 1/0 1 3.207 2.097 .406 +.004
–.003 .357 .609 ± .003 .506 +.004
–.003 1.283 2.393
--- M39029/48-324 1/0N 1 3.325 2.215 .406 +.004
–.003 .357 .609 ± .003 .506 +.004
–.003 --- ---
M39029/49-331 M39029/48-320 4 4 2.786 1.738 .281 ±.002 .225 .417 ± .002 .374 ± .002 1.158 2.206
--- M39029/48-321 4N 4 2.904 1.856 .281 ±.002 .225 .417 ± .002 .374 ± .002 --- ---
M39029/49-329 M39029/48-317 6 6 2.786 1.738 .234 ±.002 .178 .342 ± .002 .312 ± .002 1/158 2.206
--- M39029/48-318 6N 6 2.904 1.856 .234 ±.002 .178 .342 ± .002 .312 ± .002 --- ---
M39029/49-332 M39029/48-322 4G 4 2.856 1.746 .281 ±.002 .225 .417 ± .002 .374 ± .002 1.752 2.862
M39029/49-330 M39029/48-319 6G 6 2.856 1.746 .234 ±.002 .178 .342 ± .002 .312 ± .002 1.752 2.862
M39029/48
pin contact
M39029/49
socket contact
13
.700 +.017
–.016
BA
A
2.500 ±.016
MIL-C-22992, Class L Accessories
contact bushing/removal tool
MS3348
contact bushing
All dimensions for reference only.
* Order by MS part number listed.
MS Part
Number*
Contact
Wire
Barrel
Size
(Ref)
Wire
Size
(Ref)
A
Dia
+.010
–.003
B
Dia
+.002
–.003
MS3348-1 - 2L 1 2 .359 .396
MS3348-4 - 5L 4 5 .250 .272
MS3348-4 - 6L 4 6 .225 .272
MS3348-6 - 8L 6 8 .185 .225
MS3348-6 - 9L 6 9 .155 .225
MS3348-1 - 6L 1 6 .225 .396
MS3348-4 - 8L 4 8 .185 .272
MS3348-6 -10L 6 10 .136 .225
MS3348-4/0-2/0L 4/0 2/0 .500 .629
MS90562
contact removal tool
All dimensions for reference only.
* Order by MS part number listed.
MS Part
Number*
Contact
Size
A
Dia
+.000
–.002
MS90562-1 4/0 .790
MS90562-2 2/0 .696
MS90562-3 1/0 .558
MS90562-4 2 .462
MS90562-5 4 .376
MS90562-6 6 .354
14
MIL-C-22992, Class L Accessories
cable strain relief/cable sealing gland
MS90561
cable strain relief
All dimensions for reference only.
* Order by MS part number listed.
MS
Part
Number*
Arrange-
ment
Number
A
Dia
+.000
–.010
H
Dia
Cable Range L
Approx.
Max Min
MS90561-2 28-13,
32-12 1.797 1.145 1.003 8.000
MS90561-4 28-02, -04 1.797 .844 .688 7.500
MS90561-12 28-12 1.797 1.047 .891 8.000
MS90561-13 32-13 1.797 1.342 1.185 9.500
MS90561-15 44-12 2.235 1.516 1.360 11.500
MS90561-16 44-13 2.235 1.688 1.531 13.500
MS90561-17 52-12 2.922 2.328 2.039 18.000
MS90561-18 52-13 2.922 2.500 2.211 19.000
MS90561-19 44-51 2.235 1.750 1.550 12.500
MS90561-20 44-52 2.235 1.578 1.375 12.000
MS90561-21 44-56 2.235 1.160 1.010 8.000
MS23747
cable sealing gland
All dimensions for reference only. This gland must be used with MS90561 strain relief.
* Order by MS part number listed.
MS
Part
Number*
Arrange-
ment
Number
A
Dia
+.000
–.020
B
Dia
+.020
–.000
C
±.010
Min
Cable
Dia
Ref.
MS23747-2 28-13,
32-05, -12 1.805 1.130 1.034 1.005
MS23747-12 28-12 1.805 1.047 1.034 .922
MS23747-13 32-13 1.805 1.342 1.034 1.217
MS23747-14 44-03 2.242 1.438 1.160 1.313
MS23747-15 44-12 2.242 1.516 1.160 1.391
MS23747-16 44-13 2.242 1.672 1.160 1.547
MS23747-18 52-12 2.927 2.328 1.284 2.183
MS23747-19 52-13 2.927 2.453 1.284 2.308
MS23747-20 44-51 2.242 1.734 1.160 1.609
MS23747-21 44-52 2.242 1.562 1.160 1.437
MS23747-22 44-56 2.242 1.150 1.160 1.025
H
LA
CA
B
15
MIL-C-22992, Class L Accessories
protective covers
MS90563 protective covers
used with: MS90555 wall mount receptacle
MS90557 cable connecting receptacle
All dimensions for reference only.
* To complete MS part number, add letter C (Conductive) for AC or N
(Non-conductive) for DC connector assemblies.
MS
Part
Number*
Use
with
Shell
Size
A Thread
Class 2B
.1428P-.2857L
Double Stub
B Dia
Ref
C
Approx.
For
MS90555
For
MS90557
MS90563-1( ) 28 2.000 .177 .177 6.000
MS90563-3( ) 32 2.250 .209 4.500
MS90563-4( ) 32 2.250 .177 6.000
MS90563-7( ) 44 3.000 .281 .281 7.500
MS90563-11( ) 52 3.500 .281 .281 7.500
MS90564 protective covers
used with: MS90556 straight plug
MS90558 wall mount plug
All dimensions for reference only.
* To complete MS part number, add letter C (Conductive) for AC or N
(Non-conductive) for DC connector assemblies.
MS Part
Number*
Use
with
Shell
Size
A Thread
Class 2A (Plated)
.1428P-.2857L
Double Stub
B Dia
Ref
C
Approx.
J
Max
For
MS90556
For
MS90558
MS90564-1( ) 28 2.000 .177 .177 7.500 2.266
MS90564-3( ) 32 2.250 .209 6.000 2.266
MS90564-4( ) 32 2.250 .177 7.500 2.266
MS90564-7( ) 44 3.000 .281 .281 8.500 2.484
MS90564-11( ) 52 3.500 .281 .281 8.500 2.484
A
GASKET
.969
MAX
C
B
J
A
RIVET
C
B
16
MIL-C-22992, Class L
installation instructions
Complete installation instructions (L-1014) for Class L connectors are available on
request. Reproduced below are condensed assembly instructions to familiarize the
user with the installation procedure and tooling required.
Cable Preparation (MS90556 and MS90557 connectors only)
The following table shows the standard wire color coding, generator terminal mark-
ings, and connector contact identification used with Class L connectors.
Standardized Generator Wiring and Connections
Step 1) Determine cable lay to facilitate alignment of contacts and insert holes
without wire crossing.
Step 2) Strip cable jacket to dimension shown. Avoid cutting or nicking individual
conductor insulation.
Generator
Terminal Marking Current
Contact
Designation
Conductor
Circuit Wire Color
+ (POS)
– (NEG) ground
28Vdc
28Vdc
A
N
Positive
Negative
Black
White
L1
L2
L3
L0
G (or Gnd)
AC
AC
AC
AC
AC
A
B
C
N
G
Phase A
Phase B
Phase C
Neutral
Safety grounding
Black
Red
Blue (Commercial may be orange)
White
Green (Commercial may be bare)
Connector
Size
D
Inches
Approx.
28 3.000
32 3.000
44 4.250
52 5.000
Note
Some insert arrangements require that two or more ground wires be termi-
nated into one contact. Dimension D must therefore be increased to permit
routing these wires around the larger conductors.
Step 3) Install connector components in the order shown in the applicable assem-
bly view illustrated on pages17 and 18.
Step 4) Strip insulation of individual conductors to 3/4 inch from end of conductor.
DSEE
NOTE
OUTER
JACKET
17
21
54 3
MS90555 Connector
MS90556 Connector
MIL-C-22992, Class L
installation instructions
Wall Mount Receptacle Components:
1. Shell
2. Insert Assembly, Socket
3. Contact, Socket
4. Grommet Assembly, Socket
5. Nut, Retaining
6. Protective Cap Assembly (Not Shown)
7. Flange Gasket (Not Shown)
Straight Plug Components:
1. Shell and Coupling Nut Assembly
2. Insert Assembly, Pin
3. Contact, Pin
4. Spacer Assembly, Pin
5. Back Adapter
6. Gland Washer
7. Gland
8. Cable Grip
9. Gland Nut
10. Lockwasher (3 each)
11. Screw (3 each)
12. Protective Cap Assembly (Not Shown)
Note: On shell size 32 connectors, item #6 (Gland Washer) is contained within item #5 (Back Adaper).
18
2
543 1
98 7 6 5
11 10
43 2 1
MIL-C-22992, Class L
installation instructions
Cable Connecting Receptacle
Components:
1. Shell
2. Insert Assembly, Socket
3. Contact, Socket
4. Spacer Assembly, Socket
5. Back Adapter
6. Gland Washer
7. Gland
8. Cable Grip
9. Gland Nut
10. Lockwasher (3 each)
11. Screw (3 each)
12. Protective Cap Assembly (Not shown)
Wall Mount Plug Components:
1. Shell and Coupling Nut Assembly
2. Insert Assembly, Pin
3. Contact, Pin
4. Grommet Assembly, Pin
5. Nut, Retaining
6. Protective Cap Assembly (Not Shown)
7. Flange Gasket (Not Shown)
Note: On shell size 32 connectors, item #6 (Gland Washer) is contained within item #5 (Back Adaper).
MS90557 Connector
MS90558 Connector
19
MIL-C-22992, Class L
installation instructions
Contact Installation
Step 1) Insert stripped conductors in contact wirewells.
If contact bushing is used, insert conductor in bushing
and bushing in contact wirewell. If two or more ground
wires are inserted into a single contact, make sure all
wires are fully seated in wirewell.
Step 2) Select correct crimping tool, locater and die
combination from the table for contacts to be installed.
With conductor or contact bushing in place, insert contact
into tool. Close crimping die fully to form a uniform crimp.
* Available from Pico Crimping Tools Co.,
9832 Jersey Ave.
Santa Fe Springs, CA 90670
Phone: 805-388-5510
If crimping tools are available, contacts may be affixed to
conductors by soldering. Use rosin-alcohol solder flux, a
good grade of 60/40 solder and a 500 watt soldering iron
or probe type resistance soldering equipment. Pre-tin
conductors before soldering. Solder must not be present
on shoulder or retention area of contact.
Contact
Part
Number
Size Type Crimping
Tool* Locator* Die* Removal
Tool
M39029/48-327
M39029/49-335
M39029/48-328
4/0
4/0
4/0N
P
S
P
Pico Model
400B or
400B-1
4297-1 414DA-4/0N-1 MS90562-1
M39029/48-323
M39029/49-333
M39029/48-324
1/0
1/0
1/0N
P
S
P
Pico Model
400B or
400B-1
4297-3 414DA-1/0N MS90562-3
M39029/48-320
M39029/49-331
M39029/48-321
M39029/48-322
M39029/49-332
4
4
4N
4G
4G
P
S
P
P
S
Pico Model
400B or
400B-1
4297-5 414DA-4N MS90562-5
M39029/48-317
M39029/49-329
M39029/48-318
M39029/48-319
M39029/49-330
6
6
6N
6G
6G
P
S
P
P
S
Pico Model
400B or
400B-1
4297-6 414DA-6N MS90562-6
Connector Assembly
Step 1) If inserts are not already positioned in the con-
nector shell, align large tab on insert with large slot in
shell and push insert in until it bottoms in shell.
Step 2) Apply a thin coating of Dow Corning DC-4 lubri-
cant to the periphery of contact holes in spacer or grom-
met assembly. Push contacts into rear of spacer or
grommet assembly until locked into contact retainer
bushing.
Step 3) Align contacts with proper holes in insert. Small
key of insert must be aligned with appropriate keyway in
spacer or grommet assembly. Slide contacts into insert
holes until spacer or grommet assembly butts against
insert. A thin film of Dow Corning DC-4 lubricant applied
to the periphery of insert contact holes will provide maxi-
mum sealing efficiency.
Step 4) Assemble accessories to connector. The back
adapter “O” ring should have a very thin film of Dow
Corning DC-4 lubricant applied. Outer surfaces only of
gland should be lubricated with a thin film of UniTemp
Grease EP. Avoid getting grease on inside surfaces of
gland and on cable jacket.
Step 5) Tighten retaining nut or gland nut on shell or
adapter. A metal-to-metal seating condition is desireable,
but may not be attainable with maximum cable diameters.
Contact Removal
Step 1) Loosen all rear accessories and slide back along
cable.
Step 2) Remove spacer or grommet assembly with con-
tacts from connector insert.
Step 3) Using the appropriate size contact removal tool,
push tool over front of contact until it bottoms in spacer or
grommet assembly hole. This will open contact retaining
bushing and allow contact to be removed from the spacer
or grommet assembly from the rear. When using jacketed
cable, all contacts should be released from contact reten-
tion bushings before removal from spacer or grommet
assembly is accomplished.
20
Heavy Duty
Cylindrical
MIL-C-22992
QWLD
21
Amphenol Heavy Duty
Cylindrical Connectors
MIL-C-22992, QWLD
wall mount receptacle
cable connecting plug
box mount receptacle
jam nut receptacle
(wall mount)
thru bulkhead receptacle
straight plug
jam nut receptacle
(box mount)
Amphenol® QWLD Series heavy duty
cylindrical connectors provide reliable
power and control functions in hostile
environments where ordinary connec-
tors cannot survive.
Design features of this connector series
provide:
High Durability - water and explosion
proof, resistant to abrasion, corrosion,
vibration and shock
Quick, Positive Mating - double stub
threads per MIL-STD-1373 for fast cou-
pling, easily cleaned
Selection - over 300 industrial and MS-
approved insert patterns available,
including coaxial and thermocouple
On the drilling platform in the North Sea,
pump and motor generator controls run
smoothly, although constantly exposed to
salt spray.
At Prudhoe Bay where the nights are six
months long, portable lighting systems per-
mit operation regardless of temperature
plummeting to 50° below zero.
The circus ferris wheel runs continuously
despite the fact that it has rained for five
days and all power connections are lying in
six inches of mud.
These situations are typical of the extreme
conditions under which thousands of
Amphenol QWLD connectors are operating
daily. Outstanding design features that
make these cylindricals a necessity for diffi-
cult applications include:
Alumilite 225* hard anodic finish for
abrasion and corrosion resistance or
conductive cadmium plate
Resilient inserts for moisture sealing,
positive proof against shock and vibra-
tion
Sealing gaskets at every joint for water-
proof assembly
Cable strain relief provided by clamp bar
type accessories
Left hand accessory threads to prevent
damage from disconnect torque applied
in the wrong direction
Closed entry socket contact design in
solder or replaceable crimp contacts
* Registered trademark of Aluminum
Company of America
®
22
MIL-C-22992, QWLD
how to order
MS-APPROVED CONNECTORS
To illustrate the ordering procedure, part number
MS17343R20N27PW is shown as follows:
PART NU MB ER
MS17343 R20 N27 P W
1 234567
1. MS Number -
MS17343 designates wall mount receptacle
MS17344 designates straight plug
MS17345 designates cable connecting plug
MS17346 designates box mount receptacle
MS17347 designates jam nut receptacle with rear
accessory threads (wall mount)
MS17348 designates jam nut receptacle (box mount)
2. Class -
C designates pressurized - used where circuit integrity is pro-
tected by a pressure differential
R designates environmental - see table, page 1
3. Shell Size - available in shell sizes 12 through 44. Refer to
pages 53 through 59 for dimensional data.
4. Shell Finish - C for conductive or N for non-conductive
5. Insert Arrangement - current MS insert arrangements are
shown in black in the QWLD insert arrangements section of
this catalog. Only these arrangements are available in MS-
approved connectors.
6. Contact Type - P for pin, S for socket
7. Alternate Insert Rotation - used to prevent cross-mating of
connectors. Absence of a letter in this space indicates normal
(0°) position of the insert. Refer to page 26 for alternate insert
rotation illustrations.
QWLD INDUSTRIAL VERSIONS
These heavy duty connectors are identical to MS-approved types
except for the added flexibility of connector shell and contact type
and finish options, plus added insert arrangements. To illustrate
the ordering procedure, part number 10-194622-14S is shown as
follows:
PART NUMBER
10 194 6 22-14 S
1234 5
1. Base Number Prefix - used to define connector shell finish
and contact type and finish
10 - Solder type contacts, silver plated
75- Crimp type contacts, silver plated
81- Crimp type contacts, plated .0001 gold over silver
82- Crimp type contacts for MIL-C-13777 cable, silver plated
83- Crimp type contacts for MIL-C-13777 cable,
plated .0001 gold over silver
85- Crimp type contacts, plated .00005 gold over silver
All above prefix numbers utilize connector shells with Alumi-
lite* non-conductive finish
88- Solder type contacts, silver plated. Connector shell
utilizes olive drab cadmium plate over nickel
conductive finish.
2. Base Number - QWLD Series Heavy Duty Cylindrical Con-
nector
3. Shell Style -
0 designates wall mount receptacle
1 designates cable connecting plug
2 designates box mount receptacle
3 designates jam nut receptacle with rear accessory threads
(wall mount)
4 designates thru bulkhead receptacle
6 designates straight plug
9 designates jam nut receptacle (box mount)
4. Shell Size/Insert Arrangement - Amphenol® QWLD connec-
tors are available in equivalent MS shell sizes with all current
MS insert arrangements as well as a large selection of special
arrangements for power and signal circuits. Select the
required insert arrangement number from those shown in
black (MS arrangements) or red (industrial arrangements).
5. Contact Type/Alternate Insert Rotation - P for pin, S for
socket. When an alternate position of the connector insert is
required to prevent cross-mating of connectors, a different let-
ter (other than P or S) is used. Select from the table below the
Amphenol® letter which indicates both type of contact and
insert rotation desired. Refer to page 26 for alternate insert
rotation illustrations.
Alumilite is a registered trademark of Aluminum Co. of America
Pin Contacts Socket Contacts
MS Letters Amphenol® Letters MS Letters Amphenol® Letters
P P (normal) S S (normal)
PW G SW H
PX I SX J
PY K SY L
PZ M SZ N
23
MIL-C-22992, QWLD
insert arrangements
Insert
Arrangement
Service
Rating
Total
Con-
tacts
Contact Size
MS
Approved Industrial 0 4 8 12 16
12-5 D 1 1
12-48 A 3 3
12-49 A 2 2
14-3 A 1 1
14-53 Inst. 6 6
16-2 E 1 1
16-7 A 3 1 2
16-9 A 4 2 2
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
16-61 A 7 7
18-1 B, C, F, G = A;
Bal. = Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 2 1
18-6 D 1 1
18-7 B 1 1
18-8 A 8 1 7
18-9 Inst. 7 2 5
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 1 3
18-14 A 2 1 1
18-15 A 4 4
18-16 C 1 1
18-17 Inst. 7 2 5
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 B, C, F, G = A;
Bal. = Inst. 10 10
18-29 A 5 5
18-30 A 5 5
18-31 A 5 5
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 A, B, H, G = D;
C, D, E, F = A 88
20-8 Inst. 6 2 4
20-9 H = D; Bal. = A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 E = D;
A, B, C, D = A 541
22-14 A 19 19
22-15 D = E;
A, B, C, E, F = A 651
22-16 A 9 3 6
22-17 A = D; Bal. = A 9 1 8
22-18 A, B, F, G, H = D;
C, D, E = A 88
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 H = D; Bal. = A 8 8
22-24 C, D, E = D;
A, B, F = A 624
Insert
Arrangement
Service
Rating
Total
Con-
tacts
Contact Size
MS
Approved Industrial 0 4 8 12 16
24
MIL-C-22992, QWLD
insert arrangements
Insert
Arrangement
Service
Rating
Total
Con-
tacts
Contact Size
MS
Approved Industrial 0 4 8 12 16
22-27 J = D; Bal. = A 9 1 8
22-28 A 7 7
22-33 A, B, C, D = D;
E, F, G = A 77
22-34 D 5 3 2
22-36 H = D; Bal. = A 8 8
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 A, G, H = D;
Bal. = A 88
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 A, B, F, G = D;
C, D, E = A 7 133
24-17 D 5 2 3
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
28-1 A, J, E = D;
Bal. = A 936
28-2 D 14 2 12
28-3 E 3 3
28-4 G, P, S = E;
Bal. = D 927
28-5 D 5 2 1 2
28-6 D 3 3
28-7 D 2 2
28-8 L, M = E; B = D;
Bal. = A 12 2 10
28-9 D 12 6 6
28-10 G = D; Bal. = A 7 2 2 3
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 R = B; M, N, P = D;
A to L = A 15 15
28-18
M = C; G, H, J, K,
L = D; A, B = H;
Bal. = Inst.
12 12
28-19 H, M = B; A, B = D;
Bal. = A 10 4 6
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
32-1 A = E; Bal. =D 5 2 3
32-2 E 5 3 2
32-3 D 9 12 24
32-4 F, J, K, N = A;
Bal. = D 14 2 12
32-5 D 2 2
32-6 A 23 2 3 2 16
32-7 A, B, h, j = Inst.;
Bal. = A 35 7 28
32-8 A 30 6 24
32-9 D 14 2 12
32-10 A, F = E; G = B;
B, E = D; C, D = A 7223
32-12 C, D, E, F, G = A;
Bal. = D 15 5 10
32-13 D 23 5 18
32-15 D 8 2 6
32-16 A 23 2 3 2 16
32-17 D 4 4
32-73 A 46 46
36-1 D 22 4 18
36-3 D 6 3 3
36-4 A = D; B, C = A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-13 N, P, Q = E;
Bal. = A 17 2 15
36-14 D 16 556
36-15 M = D; Bal. = A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-52 A 52 52
40-1 D 30 6 24
40-9 A 47 1 22 24
40-56 A 85 85
44-52 A 104 104
Insert
Arrangement
Service
Rating
Total
Con-
tacts
Contact Size
MS
Approved Industrial 0 4 8 12 16
25
Insert
Arrange
ment
Service
Rating
Total
Con-
tacts
Contact Size
0481216
Coax**
04812
16-59 A 4 4
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 A/D 8 1 7
22-63 A 12 4 8
22-65 A/D 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-51 A 5 5
24-52 Hi Volt. 1 1
24-53 A 5 5
24-58 A 13 3 3 7
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 1 18
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 7 9
28-82 D 6 2 4
28-84 A 9 9
32-52 D 8 2 6
32-53 Inst./E 42 5 37
32-56 A 30 6* 24
32-57 Coax 8 6 2
32-58 Coax 4 4
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 4 1
QWLD
special insert arrangements
36-51 D 4 2 2
36-54 A 39 8 31
36-55 A 39 8* 31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
36-83 Coax 7 7
36-85 A/D 35 35*
40-53 A 60 60
40-57 E 4 4
40-61 A 59 1 3 55
40-62 A 60 60
40-63 A 61 61*
40-64 Coax 36 3 20 13
40-66 Coax 4 4
40-67 A 11 1 10
40-68 A 21 21
40-70 A 61 61
40-72 A 11 1 10
40-73 A 61 61
40-74 A 6 1 4 1
40-75 E 5 4 1
40-80 A 11 10 1
40-81 A 62 62*
40-82 A 62 62
40-85 A 60 60*
40-86 E 4 4
40-87 D 7 7
44-53 A 36 18 18
48-51† A 56 10 42 4
48-52† A 61 56 5
48-53† D 37 37
48-54† A 56 10 42 4
48-55† A 78 6 2 2 68
48-57† A 56 4 10 42
48-60† A 56 10 42 4
Insert
Arrange
ment
Service
Rating
Total
Con-
tacts
Contact Size
0481216
Coax**
04812
* Crimp contacts accommodate wire the same size as the contact as well as wire of the
next smaller, even size. Arrangements identified with an asterisk (*) are exceptions.
See insert arrangement drawings on pages 39-47 for application wire size.
** Coaxial cable data can be found on insert arrangement drawings, pages 39-47. For
further information on coaxial contacts and cable see catalog 12-130.
Consult Sidney, NY for availability.
26
MIL-C-22992, QWLD
alternate insert rotations
The following insert arrangements have the same alternate
insert rotations for W, X, Y and Z which are:
Degrees
WX Y Z
80 110 250 280
16-7 20-14 22-16 24-3 24-21 28-16 32-9
18-5 20-16 22-17 24-4 24-28 28-17 32-10
18-9 20-20 22-18 24-5 28-1 28-19 32-12
18-13 20-22 22-19 24-6 28-4 28-20 32-13
18-14 22-3 22-21 24-7 28-8 28-21 36-1
20-7 22-6 22-24 24-12 28-9 32-1 36-7
20-8 22-12 22-25 24-16 28-10 32-3 36-8
20-9 22-14 22-33 24-17 28-11 32-4 36-13
20-12 22-15 22-34 24-20 28-15 32-6
To avoid cross-plugging problems in applications requiring
the use of more than one connectror of the same size and
arrangement, alternate insert rotations are available as indi-
cated in the accompanying chart.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction from
the normal shell key. The socket insert would be rotated
counterclockwise the same number of degrees in respect to
the normal shell key.
Views looking into front face of pin insert or rear of socket insert.
Insert
Arrangement
Degrees
WX Y Z
16-9 35 110 250 325
16-10 90 180 270
16-11 35 110 250 325
16-13 35 110 250 325
16-61 80 280
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 290
18-10 120 240
18-11 170 265
18-12 80 280
18-15 120 240
18-19 120 240
18-20 90 180 270
18-22 70 145 215 290
18-29 90 180 270
20-3 70 145 215 290
20-4 45 110 250
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 280
20-17 90 180 270
20-18 35 110 250 325
20-19 90 180 270
20-21 35 110 250 325
20-23 35 110 250 325
Insert
Arrangement
Degrees
WX Y Z
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 110 250
22-23 35 250
22-27 80 250 280
22-28 80 280
22-36 90 270
24-2 80 280
24-9 35 110 250 325
24-10 80 280
24-11 35 110 250 325
24-22 45 110 250
24-27 80 280
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
Insert
Arrangement
Degrees
WX Y Z
28-6 70 145 215 290
28-7 35 110 250 325
28-12 90 180 270
28-18 70 145 215 290
28-22 70 145 215 290
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250
32-73 36
36-3 70 145 215 290
36-4 70 145 215 290
36-5 120 240
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270
36-15 60 125 245 305
36-52 72 144 216 288
40-1 65 130 235 300
40-9 65 125 225 310
40-56 72 144 216 288
44-52 72 135 225 288
B
A
A
B
A
B
A
B
Position W Position X Position Y Position Z
27
AB
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 12-5 12-48 12-49 14-3 14-53 16-2
Service Rating D A A A Inst. E
Number of Contacts 1 3 2 1 6 1
Contact Size 12 16 16 8 16 12
Insert Arrangement 16-7 16-9 16-10 16-11 16-12 16-13
Service Rating A A A A A A
Number of Contacts 1 2 2 2 3 2 1 2*
Contact Size 8 16 12 16 12 12 4 12
Insert Arrangement 16-61 18-1 18-3 18-4 18-5 18-6
Service Rating A B, C, F, G = A; Bal. = Inst. D D D D
Number of Contacts 7 10 2 4 2 1 1
Contact Size 16 16 12 16 12 16 4
Insert Arrangement 18-7 18-8 18-9 18-10 18-11 18-12
Service Rating B A Inst. A A A
Number of Contacts 1 1 7 2 5 4 5 6
Contact Size 8 12 16 12 16 12 12 16
*A = Iron; B = Constantan CONTACT LEGEND 16 12 8 4 0
AB
C
A
B
C
D
B
CA
A
B
AB
A
B
C
D
E
F
G
H
I
J
AB
A
BC
D
A
BC
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
A
BC
D
A
B
C
D
E
F
A
BC
D
E
A
B
CD
E
F
G
A
B
C
A
B
C
D
E
F
28
AB
C
250˚
A
B
C
D
E
F
G
H
I
J
A
B
C
D
E
110˚
AB
C
D
E
260˚
AB
C
D
E
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
100° Rotation
of 18-9
Insert Arrangement 18-13 18-14 18-15 18-16 18-17 18-19
Service Rating A A A C Inst. A
Number of Contacts 13 11 4** 1 25 10
Contact Size 8 12 4 16 12 12 12 16 16
250° Rotation 110° Rotation 260° Rotation
of 18-1 of 18-20 of 18-20
Insert Arrangement 18-20 18-22 18-24 18-29 18-30 18-31
Service Rating A D B, C, F, G = A, Bal. = Inst. A A A
Number of Contacts 5 3 10 5 5 5
Contact Size 16 16 16 16 16 16
Insert Arrangement 20-2 20-3 20-4 20-6 20-7 20-8
Service Rating D D D D A, B, H, G = D; C, D, E, F = A Inst.
Number of Contacts 1 3 4 3 8 2 4
Contact Size 0 12 12 16 16 8 16
**A, C = Iron; B, D = Constantan CONTACT LEGEND 16 12 8 4 0
A
B
C
D
A
B
A
B
C
D
100˚
A
B
C
D
E
F
G
A
BC
DEF G
H
K
J
A
B
D
C
A
B
C
DE
F
G
H
A
B
C
D
EF
A
BC
A
BC
AB
C
D
E
29
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 20-9 20-11 20-12 20-14 20-15 20-16
Service Rating H = D; Bal. = A Inst. A A A A
Number of Contacts 1 7 13 1 1 2 3 7 2 7
Contact Size 12 16 16 4 16 8 12 12 12 16
Insert Arrangement 20-17 20-18 20-19 20-20 20-21 20-22
Service Rating A A A A A A
Number of Contacts 5 1 3 6 3 1 3 1 8 3 3
Contact Size 12 16 12 16 8 4 12 12 16 8 16
100° Rotation 250° Rotation
of 20-11 of 20-11
Insert Arrangement 20-23 20-24 20-25 20-27 20-29 20-30
Service Rating A A Inst. A A Inst.
Number of Contacts 2 2 2 13 14 17 13
Contact Size 8 8 16 16 16 16 16
CONTACT LEGEND 16 12 8 4 0
A
B
A
BC
D
E
F
GH
J
K
L
M
N
A
BC
A
B
C
D
A
B
100˚
A
BC
D
E
F
GH
J
K
L
M
N
250˚
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
D
EFG
H
I
A
B
CD
EG
F
A
B
C
D
E
A
B
C
DE
F
GH
A
B
C
D
E
F
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
G
H
I
A
BC
D
E
F
A
B
C
D
A
B
C
D
EF
G
H
I
J
K
L
M
N
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
30
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangements 20-33 22-1 22-2 22-4 22-5
Service Rating A D D A D
Number of Contacts 11 2 3 2 2 2 4
Contact Size 16 8 8 8 12 12 16
Insert Arrangement 22-6 22-7 22-8 22-9 22-10
Service Rating D E E E E
Number of Contacts 2 1 1 2 3 4
Contact Size 8 16 0 12 12 16
Insert Arrangement 22-11 22-12 22-13 22-14 22-15
Service Rating B D E = D; A, B, C, D = A A D = E; A, B, C, E, F = A
Number of Contacts 2 2 3 4 1 19 5 1
Contact Size 16 8 16 12 16 16 12 16
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
K
H
JM
L
A
BC
A
B
CD
E
F
A
BC
A
BC
D
AB
A
B
CD
E
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
E
F
C
D
AB
A
B
C
D
A
B
C
AB
A
B
C
D
E
31
A
BC
D
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 22-16 22-17 22-18 22-19 22-20
Service Rating A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A A A
Number of Contacts 3 6 1 8 8 14 9
Contact Size 12 16 12 16 16 16 16
Insert Arrangement 22-21 22-22 22-23 22-24 22-27
Service Rating A A H = D; Bal. = A C, D, E = D; A, B, F = A J = D; Bal. = A
Number of Contacts 1 2 4 8 2 4 1 8
Contact Size 0 16 8 12 12 16 8 16
Insert Arrangement 22-28 22-33 22-34 22-36 24-2
Service Rating A A, B, C, D = D; E, F, G = A D H = D; Bal. = A D
Number of Contacts 7 7 3 2 8 7
Contact Size 12 16 12 16 12 12
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
FGH
J
A
B
CDE
F
GH
J
A
B
C
D
E
F
A
B
C
E
F
G
D
A
BC E
FG
DA
BC
DE
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
C
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
A
B
C
D
E
F
G
H
32
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 24-3 24-5 24-6 24-7 24-9
Service Rating D A A, G, H = D; Bal. = A A A
Number of Contacts 2 5 16 8 2 14 2
Contact Size 12 16 16 12 12 16 4
Insert Arrangement 24-10 24-11 24-12 24-16 24-17
Service Rating A A A A, B, F, G = D; C, D, E = A D
Number of Contacts 7 3 6 2 3 1 3 3 2 3
Contact Size 8 8 12 4 12 8 12 16 12 16
Insert Arrangement 24-20 24-21 24-22 24-27 24-28
Service Rating D D D E Inst.
Number of Contacts 2 9 1 9 4 7 24
Contact Size 12 16 8 16 8 16 16
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
A
B
CD
E
F
G
ABC
DEF
G
H
I
A
B
C
D
E
A
B
C
D
E
F
G
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
F
G
H
JK
A
BC
DA
B
C
D
E
F
G
ABCD
EFGH J
KL
MNPQ
RSTUV
WX YZ
A
B
C
E
F
G
D
AB
C
DE
FGH
JK
LMN
P
S
R
A
B
AB
C
D
E
33
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 28-1 28-2 28-3 28-4
Service Rating A, J, E = D; Bal. = A D E G, P, S = E; Bal. = D
Number of Contacts 3 6 2 12 3 2 7
Contact Size 8 12 12 16 8 12 16
Insert Arrangement 28-5 28-6 28-7 28-8
Service Rating D D D L, M = E; B = D; Bal. = A
Number of Contacts 2 1 2 3 2 2 10
Contact Size 4 12 16 4 4 12 16
Insert Arrangement 28-9 28-10 28-11 28-12
Service Rating D G = D; Bal. = A A A
Number of Contacts 6 6 2 2 3 4 18 26
Contact Size 12 16 4 8 12 12 16 16
CONTACT LEGEND 16 12 8 4 0
AB
A
BC
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
BC
AB
CD
P
S
EFG
A
B
CD
E
A
B
C
D
E
F
G
H
J
K
L
M
A
B
C
DE
F
G
H
J
K
LM
A
B
CD
E
F
GA
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
34
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
100° Rotation
of 28-12
Insert Arrangement 28-13 28-15 28-16 28-17
Service Rating A A A R = B; M, N, P = D; A to L = A
Number of Contacts 26 35 20 15
Contact Size 16 16 16 16
Insert Arrangement 28-18 28-19 28-20 28-21
Service Rating M = C; G, H, J, K, L = D; A, B = H; Bal. = Inst. H, M = B; A = D; Bal = A A A
Number of Contacts 12 4 6 10 4 37
Contact Size 16 12 16 12 16 16
Insert Arrangement 28-22 32-1 32-2 32-3
Service Rating D A = E; Bal. = D E D
Number of Contacts 33 23 32 1224
Contact Size 4 16 0 12 4 16 0 4 12 16
CONTACT LEGEND 16 12 8 4 0
AB
CDEFG
HJKLM
PRST
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
M
AB
C
E
G
H
J
K
L
M
A
B
C
D
E
F
G
H
J
K
L
M
N
P
A
BC
D
EFGHJ
KLMNPR
STUV WXZ
abcdef
ghjkm
nprs
A
B
C
DE
F
A
B
CD
E
A
B
C
D
E
A
B
C
DEF
G
H
J
100˚
A
B
C
D
E
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
F
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
35
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 32-4 32-5 32-6 32-7
Service Rating F, J, K, N = A; Bal. = D D A A, B,h , j = Inst; Bal. = A
Number of Contacts 2 12 2 2 3 2 16 7 28
Contact Size 12 16 0 4 8 12 16 12 16
Insert Arrangement 32-8 32-9 32-10 32-12
Service Rating A D A, F = E, G = B; B, E = D; C, D = A C, D, E, F, G = A; Bal. = D
Number of Contacts 6 24 2 12 2 2 3 5 10
Contact Size 12 16 4 16 4 8 16 12 16
100° Rotation
of 32-6
Insert Arrangement 32-13 32-15 32-16 32-17
Service Rating D D A D
Number of Contacts 5 18 2 6 2 3 2 16 4
Contact Size 12 16 0 12 4 8 12 16 4
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
CD
E
F
G
AB
CD EFG
HJK
LM
OP
N
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
AB
CD E F G
HI J K
LMN
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
A
BC
DE
F
G
H
A
BC
D
36
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 32-73 36-1 36-3
Service Rating A D D
Number of Contacts 46 4 18 3 3
Contact Size 16 12 16 0 12
Insert Arrangement 36-4 36-5 36-6
Service Rating A = D; B, C = A A A
Number of Contacts 3 4 2 4
Contact Size 0 0 0 4
Insert Arrangement 36-7 36-8 36-9
Service Rating A A A
Number of Contacts 7 40 1 46 1 2 14 14
Contact Size 12 16 12 16 4 8 12 16
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
A
B
C
D
A
B
C
D
E
F
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
ABC
DE F G H
IJK LMN
OP R S T
UVW
A
BC
1
2
3
4
5
6
7
8
9
21
22 23
24
25
26
27
28
29
11
12
13
14
15
16
17
18
19
41
42
43
44
45
46
10
20
30
31
32
33
34
35 36
37
38
39
40
37
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
100° Rotation 110° Rotation
of 36-10 of 36-10
Insert Arrangement 36-10 36-11 36-12
Service Rating A A A
Number of Contacts 48 48 48
Contact Size 16 16 16
Insert Arrangement 36-13 36-14 36-15
Service Rating N, P, Q = E; Bal. = A D M = D; Bal. = A
Number of Contacts 2 15 5 5 6 35
Contact Size 12 16 8 12 16 16
100° Rotation 110° Rotation 100° Rotation
of 36-7 of 36-7 of 36-9
Insert Arrangements 36-16 36-17 36-18
Service Rating A A A
Number of COntacts 7 40 7 40 1 2 14 14
Contact Size 12 16 12 16 4 8 12 16
CONTACT LEGEND 16 12 8 4 0
100˚
AB
CD EFG
HJK LMN
OPQ RSTU
VWX Y Z a b c
def g hj k
mnpr
tuv w
s
x
yz
q
110˚
AB
CD EFG
HJ KLMN
OPQR STU
VWX Y Z a bc
de f g h j k
mnp r
tu vw
s
x
yz
q
A
B
C
D
EF
G
H
J
K
LM
NP
Q
RS
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
100˚
AB
CDE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
AB
CD E FG
HJK LMN
OPQR STU
VWXY Z a b c
de fg hj k
mnpr
tuvw
s
x
yz
q
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
38
MIL-C-22992, QWLD
contact arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 36-20 36-52 40-1
Service Rating A A D
Number of Contacts 2 2 30 52 6 24
Contact Size 8 12 16 16 12 16
Insert Arrangement 40-9 40-56 44-52
Service Rating A A A
Number of Contacts 1 22 24 85 104
Contact Size 8 12 16 16 16
CONTACT LEGEND 16 12 8 4 0
AB
CD E FG
HJK LMN
PRSTUVW
XYZ abc
def g
hj
km
ABC
D
EFHJ
K
LM N P R S
TUV WXY Z
abcdfghi
jkmn p r
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
ABC
DE FG
HI JKL
MNO PRS
TU V WX
YZ ab
cde
AB
CDE
F
GHIJ
KL
MN O PQ
RST
UVWXYZa
bcd
efg h i
jk
lm
n
p
r
tu
s
o
q
ABCD
EF H J K LM
NPRSTUVW
XYZab
cdfg
hijkmnp r
tuvw
s
xyz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
BA
BB BC BD BE BF BH BJ BK BL BM
BN BP BR BS BT BU BV BW BX
BY BZ CA CB CC CD CE CF
CH CJ CK CL CM CN CP
CR CS
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT AU AV AW AX AY AZ
abcd
fghi jkmnp
rtuvwsxyz
AB
CDEF H JK
LMN P R S T U
VWXYZ
q
39
QWLD
special arrangements
Ever expanding requirements for more complex circuits in
ground equipment and elevated altitude applications has
prompted Amphenol to provide inserts not covered by the
MS drawings. Pictured here and on the following pages
are insert layouts which have anywhere from one contact
(high tension) to the 78 contact insert in shell size 48.
Many of these special inserts are also available in alter-
nate keyway positions. Please contact Amphenol, Sidney,
NY or your local Amphenol sales office for arrangements
particular to your circuit application.
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 16-59 20-51 20-57 20-58 20-59
Service Rating A A A A A
Number of Contacts 4 3* 7* 5 5 3*
Contact Size 12 8 12 for #14 or 16 wire 12 16 8 for #10 or 12 wire
Insert Arrangement 20-66 20-79 22-63 22-65
Service Rating A H = D; Bal. = A A H = D; Bal. = A
Number of Contacts 1 5 7* 1* 4 8 8*
Contact Size 16 12 or #10 wire 16 12 for #16 wire 12 16 12 for #14 or 16 wire
Insert Arrangement 22-70 22-80 24-51 24-52
Service Rating A A A Hi-Volt
Number of Contacts 8 5 3* 5* 1
Contact Size 12 16 8 for #10 or 12 wire B, E for AN #10 or 12 wire 12
A, C, D for AN #8 wire
*Solderless CONTACT LEGEND 16 12 8 4 0
AB
CD
A
B
C
A
B
CD
EG
F
A
BC
DE
F
H
J
K
L
A
B
C
A
BC
D
E
F
A
B
C
D
E
F
G
H
A
BC
A
B
C
D
E
F
G
H
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
DE
F
H
J
K
L
M
N
P
A
B
C
D
E
40
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 24-53 24-58 24-59 24-60
Service Rating A A A A
Number of Contacts 5* 3 3 7 7 7 7*
Contact Size 8 8 12 16 12 16 8 for #10 or 12 wire
Insert Arrangement 24-65 24-66 24-67 24-71
Service Rating A D Inst. A
Number of Contacts 11 4 7 19 2* 5*
Contact Size 12 16 12 12 8 8 for #10 or 12 wire
Insert Arrangement 24-75 24-79 24-80 24-84
Service Rating A A Inst. A
Number of Contacts 5 2 5 23 1 18
Contact Size 8 8 for #16 wire 8 16 12 12 (Coax) RG-188/U
or RG-174/U
*Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
C
D
E
F
H
J
K
LM
N
P
R
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
CD
E
F
G
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
A
B
C
D
E
ABCD
EFGHJ
KLMNPQ
RSTU
V
WX Z
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
41
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 28-51 28-59 28-66 28-72
Service Rating A A A
Number of Contacts 12 7 10 2 14 3
Contact Size 12 12 16 8 12 4 (Coax) RG-59A/U
or RG-62A/U
Insert Arrangement 28-74 28-75 28-79 28-82
Service Rating A A A D
Number of Contacts 9* 4* 3* 9* 7* 7 9 2 4
Contact Size 16 8 8 for #10 wire 16 8for #10 wire 8 16 8 12
(S, T, R)
90° CW Rotation
of 32-15
Insert Arrangement 28-84 32-52 32-53 32-56
Service Rating A D t, u = E; Bal. = Inst. A
Number of Contacts 9 6 2 5 37 24 6
Contact Size 8 12 0 12 16 16 12 for #10 wire
*Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
H
J
K
L
M
N
AB C D
EFH
JK
LMN
PR S TU
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
BC
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
12
3
45
6
A
B
C
DE
F
G
H
I
90˚
A
BC
DE
F
G
H
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
42
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 32-57 32-58 32-60 32-62
Service Rating ** A **
Number of Contacts 6 2 4 15 8 2 1 2 16 2
Contact Size 12 0 (Coax) RG-71/U 4 (Coax) RG-161U 16 8 (Coax) RG-124/U 4 8 12 16 8 (Coax)RG-124/U
or RG-179/U
Insert Arrangement 32-64 32-68 32-75 32-76
Service Rating Inst. A 8, 9 = D A
Number of Contacts 54 12 4 2 7 19
Contact Size 16 16 4 (Coax) RG-58C/U 12 8 (Coax) RG-180B/U 12
Insert Arrangement 32-79 36-51 36-54 36-55
Service Rating D D A A
Number of Contacts 4 1 2 2 8 31 31 8
Contact Size 4 8 0 4 8 16 16 8 for #6 wire
**Consult Sidney, NY for service rating of power contacts. CONTACT LEGEND 16 12 8 4 0
A
BC
DE
F
G
H
A
BC
D
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
AB
CD
EF
GH
J
KLMN
O
PR
S
T
UV
W
I
X
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcde
f
ghjk
mnpr
tu
v
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AB
CDE
FG H
J
KLM
NP
QR
1
2
3
4
5
67
89
12 3
4567
8 9 10 11 12
13 14 15 16
17 18 19
A
BC
D
E
A
B
CD
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
43
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 36-59 36-60 36-64
Service Rating A **
Number of Contacts 50 3 40 7 4
Contact Size 16 12 for #10 wire 16 12 for #10 wire 0 (Coax) RG-11/U
RG-12/U or RG-13/U
Insert Arrangement 36-65 36-71 36-73
Service Rating A
Number of Contacts 4 3 50 7
Contact Size 0 (Coax) RG-59/U, RG-62/U 12 16 4 (Coax) RG-62B/U
or RG-71/U
Insert Arrangement 36-74 36-75 36-76
Service Rating A A A
Number of Contacts 43 1 48 47
Contact Size 16 8 (Coax) RG-187/U 16 for #14 wire 16
**Consult Sidney, NY for service rating of power contacts. CONTACT LEGEND 16 12 8 4 0
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
ABC
D
EF HJK
LMNPRS T
U
VWX YZab
cdfg hi jk
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
A
B
C
D
E
F
G
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
12
3
45
67 8
910 1112
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
B
C
D
A
B
C
D
44
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 36-77 36-78 36-79
Service Rating D A A
Number of Contacts 7 2 12 20
Contact Size 4 16 8 12
Insert Arrangement 36-80 36-83 36-85
Service Rating A M = D; Bal. = A
Number of Contacts 20 7 35
Contact Size 12 for #10 wire 4 (Coax) RG-58/U 16 for #12 wire
Insert Arrangement 40-53 40-57 40-61
Service Rating A E A
Number of Contacts 60 4 1 3 55
Contact Size 16 0 8 12 16
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
1
2
3
4
56
7
8
9
10
11
12
13
14
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
1
23 45
678 910
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
12
345 67
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
45
AB
CDE
FH J
KL
M
AB
CDE
FH J
KL
M
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 40-62 40-63 40-64
Service Rating A A
Number of Contacts 60 61 3 20 13
Contact Size 16 16 for #14 wire 12 16 8 (Coax) RG-124/U
Insert Arrangement 40-66 40-67 40-68
Service Rating A A
Number of Contacts 4 1 10 21
Contact Size 0 (Coax) RG-63B/U 16 4 (Coax) RG-59/U 8
Insert Arrangement 40-70 40-72 40-73
Service Rating A A A
Number of Contacts 61 1 10 61
Contact Size 16 16 4 (Coax) RG-9B/U 16
CONTACT LEGEND 16 12 8 4 0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3335
36
37
38
39
40
41
42
43
44
45
46
47
34
48
49
50
51
52
53
54
55
56
57
58
59
60
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
1
2
3
4
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
1
2345
678910
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
46
AB
CDE
FH J
KL
M
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 40-74 40-75 40-80
Service Rating A E A
Number of Contacts 1 1 4 1 4 1 10
Contact Size 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U 12 0 16 4
or RG-214/U
Insert Arrangement 40-81 40-82 40-85
Service Rating A A A
Number of Contacts 62 62 60
Contact Size 16 for #14 wire 16 16 for #14 wire
Insert Arrangement 40-86 40-87 44-53
Service Rating D A
Number of Contacts 4 7 18 18
Contact Size 0 (Coax) RG-115A/U 4 16 8 (Coax) RG-124/U
CONTACT LEGEND 16 12 8 4 0
1
2
34
5
6
1
2
3
4
5
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1234
567891011
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
1
2
34
5
6
7
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
km
n
p
q
47
QWLD
special arrangements
front face of pin insert or rear of socket insert illustrated
Insert Arrangement 48-51† 48-52† 48-53†
Service Rating A A D
Number of Contacts 42 10 4 56 5 37
Contact Size 16 8 0 (Coax) RG-41/U 16 0 (Coax) RG-41/U 12
Insert Arrangement 48-54† 48-55† 48-57†
Service Rating A A A
Number of Contacts 42 10 4 68 2 2 6 42 10 4
Contact Size 16 8 0 (Coax) RG-59/U 16 12 8 4 16 8 0
Insert Arrangement 48-60†
Service Rating A
Number of Contacts 42 10 4
Contact Size 16 8 0 (Coax) RG-214/U
†Consult Sidney, NY for availablity
CONTACT LEGEND 16 12 8 4 0
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
A
BC
D
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
A
B
C
D
E
ABCD
EFGHJ
KLMNPR
ST UVWX Z
abcdef
gh j km
npr s
1
23
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36 37 38
39
40 41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67 68
69 70
71
72
73 74 75
76
77
78
48
QWLD
thermocouple contact availability
A complete line of cylindrical connectors contain-
ing thermocouple insert arrangements is avail-
able. The contact layout for a particular
arrangement will be found in either the MIL-C-
22992, QWLD contact arrangement section,
pages 27-38, or the Special contact arrangement
section, pages 39-47. All thermocouple contact
layouts may contain either iron, alumel, chromel,
constantan, standard (copper) or brass (dummy)
contacts. See the thermocouple tabulations on
the following pages.
The following abbreviations are used in the con-
tact material column in the charts that follow.
Also, thermocouple contacts are color coded as
shown. (This identification is made by means of
small dots of stain on solder well end of the con-
tact.)
WIRE WELL DATA
RECOMMENDED WIRE
Abbreviation Material Color Code
Ir. Iron Black
Con Constantan Yellow
Cu. Copper Alloy N/A
Ch. Chromel White
Al. Alumel Green
Dummy Brass N/A
Contact
Size
Well Inside Dia.
+ .004
– .002
Well Depth
+ .031
– .000
Solder Well
Barrel
Outside Dia.
12 .125 .250 .166 ±.003
16 .094 .188 .125 +.002
–.004
I Chromel-Alumel Use wire in accordance
with MIL-W-5848
II Iron-Constantan Use wire in accordance
with MIL-W-5845
49
QWLD
thermocouple arrangements
Shell Size
and Arrg.
Similar to
MS Arrg.
Total
Contacts
Contact
Size Pin Insert
Rotation
CW
Contact Material
12 16
14-59 14-53 6 6 None A = AI.; B = Ch.; C = lr.; D = Con.; E,F = Cu.
16-52 16-11 2 2 90° A = AI.; B = Ch.
16-53 16-9 4 2 2 70° A = AI.; C = Ch.; B, D = Cu.
16-55 16-10 3 3 45° A = AI.; B = Ch.; C = Cu.
16-56 16-13 2 2 90° A = Con.; B = Cu.
16-57 16-10 3 3 None A = AI.; B = Cu.; C = Ch.
16-58 16-10 3 3 None A = Con.; B, C = Cu.
16-60 16-13 2 2 None A = AI,; B = Ch.
16-62 16-11 2 2 None A = Con.; B = Cu.
16-67 16-11 2 2 None A = AI.; B = Ch.
16-68 16-9 4 2 2 None A, B, C = Ch.; D = AI.
18-51 18-12 6 6 None A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy
18-52 18-11 5 5 None A = lr.; B = Con.; C = Ch.; D = AI.; E = Dummy
18-53 18-12 6 6 None A, D = Ir.; B, E = Con.; C, F, = Dummy
18-54 18-15 4 4 None A, C = AI.; B, D = Ch.
18-56 18-1 10 10 45° A, C, E, G, I = Ir.; B, D, F, H, J = Con
18-57 18-12 6 6 45° A, C, E = AI.; B, D, F = Ch.
18-59 18-12 6 6 45° A, C = Ir,; B, E, F, = Con.; D = Cu.
18-60 18-11 5 5 45° A, D = AI.; B, C = Ch.; E = AI.
18-61 18-12 6 6 None A, C = Ir.; B, D = Con.; E = Ch.; F = AI.
18-62 18-12 6 6 None A, B, D = Ir.; D, E, F = Con.
18-63 18-15 4 4 None A, C = Con.; B, D = Cu.
18-65 18-12 6 6 None A = Ir.; B = Con.; Balance = Cu.
18-66 18-1 10 10 None A, C, E, G, I = Cu.; B, D, F, H, J = Con.
18-67 18-12 6 6 None A, C, E = Cu.; B, D, F = Con.
18-68 18-11 5 5 None A, D = AI.; B, C = Ch.; E = Cu.
18-69 18-1 10 10 None A = AI.; B = Ch.; Balance = Cu.
18-70 18-11 5 5 None A = Ir.; B = Con.; C = Ch.; D = AI.; E = Cu.
18-71 18-15 4 4 None A = Con.; Balance = Cu.
18-72 18-15 4 4 None D = Con.; Balance = Cu.
18-73 18-9 7 2 5 None A = AI.; D = Ch; Balance = Cu.
18-74 18-12 6 6 None A = Ch.; B = AI.; D = lr.; E = Cu.; C, F = Con.
18-76 18-1 10 10 None A, C, E, G, I = AI.; B, D, F, H, J = Ch.
18-77 18-1 10 10 None A, C, E, G = AI.; B, D, F, H = Ch.; Bal. = Cu.
18-78 18-1 10 10 None A = AI.; B = Ch.; D, F, H, J = Con.; Bal. = Cu.
18-79 18-12 6 6 None A, F, = Ir.; B, E = Con.; C, D, = Cu.
18-80 18-15 4 4 None A, C = Cu.; B, D = Con.
18-81 18-1 10 10 None E, G = Con.; Bal. = Cu.
18-82 18-1 10 10 None E, G = Con.; F, H = Ir.; Bal = Cu.
20-52 20-4 4 4 315° A= Ir.; B = Con.; C = Ch.; D = AI
20-56 20-7 8 8 45° A, B, G, H = Ir.; C, D, E, F = Con.
20-60 20-7 8 8 45° D = Ch.; E = AI.; Balance = Cu.
20-61 20-29 17 17 45° A, B, M = Cu.; Balance = Con.
20-62 20-15 7 7 80° A, C, E, = AI.; B, D, F, = Ch.; G = Cu.
50
QWLD
thermocouple arrangements
Shell Size
and Arrg.
Similar to
MS Arrg.
Total
Contacts
Contact
Size Pin Insert
Rotation
CW
Contact Material
12 16
20-64 20-27 14 14 None A = AI.; C = Ch.; Balance = Cu.
20-65 20-27 14 14 None A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con.
20-67 20-16 9 2 7 None H = AI.; I = Ch.; Balance = Cu.
20-68 20-7 8 8 None A, B, G, H = Con.; C, D, E, F, = Cu.
20-69 20-27 14 14 None A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con.
20-70 20-29 17 17 None A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con.
20-71 20-29 17 17 None S = AI.; R = Ch.; Balance = Cu.
20-74 20-29 17 17 None A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu.
20-75 20-15 7 7 None G = AI.; Balance = Ch.
20-77 20-16 9 2 7 None A = Con.; Balance = Std.
20-80 20-27 14 14 None A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con.
20-81 20-27 14 14 None A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = AI
20-82 20-29 17 17 None A, C, E, G, J, L, N, R = AI.; B, D, F, H, K, M, P, S = Ch.; T = Cu.
20-85 20-33 11 11 None K, L, = AI.; Bal. = Ch.
20-87 20-29 17 17 None A, C, E, G, J, L, N, R = Con.; Bal. = Cu.
20-88 20-27 14 14 None A, C, E = AI.; B, D, F, = Ch.; G, H, K, N = Con.; Bal. = Cu.
20-89 20-27 14 14 None B, D, F, H, J, L = AI,; A, C, E, G, I, K = Ch., M, N = Cu.
20-90 20-27 14 14 None C, G, I = Ch.; K, L, M = AI.; Bal. = Cu.
20-91 20-27 14 14 None I = Ch.; K = AI.; Bal. = Cu.
20-92 20-7 8 8 None A = AI.; H = Cu.; Bal. = Ch.
20-93 20-27 14 14 None A = Ch.; B = AI.; Bal. = Cu.
20-94 20-15 7 7 None A, C, E = AI.; B, D, F = Ch.; G = Cu.
20-99 20-33 11 11 None A = AI.; Bal. = Ch.
22-57 22-14 19 19 45° A, C, E, G, J, L, N, R = lr.; B, D, F, H, K, M, P, S = Con.; T, U, V, = Cu.
22-60 22-14 19 19 45° U = AI.; N = Ch.; Bal. = Cu.
22-62 22-23 8 8 60° A, B, F, G = AI.; C, D, E, H = Ch.
22-68 22-19 14 14 45° A, C, E, G, J, L, M = lr.; B, D, F, H, K, P, N = Con.
22-69 22-19 14 14 45° A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con.
22-71 22-14 19 19 None V = AI.; U = Ch.; Balance = Cu.
22-72 22-5 6 2 4 None B = AI.; E = Ch.; Balance = Cu.
22-73 22-5 6 2 4 None E = AI.; B = Ch.; Balance = Cu.
22-74 22-23 8 8 None A, C, E, G = lr.; B, D, F, H = Con.
22-75 22-23 8 8 None A = AI.; B, D, G, H = Cu.; C = Ch.; E = lr.; F = Con
22-76 21 21 None W = Con.; Balance = Cu.
22-77 22-19 14 14 None B, D, F, H, J, K, M, P = Cu.; A, E, L = lr.; C, G, N = Con.
22-78 22-14 19 19 None A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu.
22-79 22-10 4 4 None A, C = Con.; B, D = Cu.
22-82 22-14 19 19 None A, C, E, G, J, L, N, R, T = lr.; B, D, F, H, K, M, P, S, U = Con.; V = Cu.
22-83 22-18 8 8 None A, C, E, G = Al.; B, D, F, H, = Ch.
22-84 22-14 19 19 None A, C, S, = Ch.; B, D, T = Al.; Bal. = Cu.
22-85 22-19 14 14 None A, C, E, G, J, L, N = Al.; B, D, F, H, K, M, P = Ch.
22-89 22-88 7 7 None A, C, E = lr.; B, D, F = Con.; G = Cu.
24-56 24-20 11 2 9 45° E = Al.; F = Ch.; Balance = Cu.
24-57 24-26 24 24 45° A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al
24-62 24-28 24 24 None A, C, E, G = lr.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu.
51
QWLD
thermocouple arrangements
* Amphenol arrangement
Shell Size
and Arrg.
Similar to
MS Arrg.
Total
Contacts
Contact
Size Pin Insert
Rotation
CW
Contact Material
12 16
24-63 24-28 24 24 None A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con.
24-64 24-5 16 16 None A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con.
24-68 24-28 24 24 None D = Con.; Balance = Cu.
24-81 24-7 16 2 14 None A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con.
24-88 24-28 24 24 None A, B, C, D, E, F, G, H, J, K, L, M = Con.; Bal. = Ir.
24-91 24-5 16 16 None A, B, C, D, E, F, G, H = Al.; J, K, L, M, N, P, R, S = Ch.
28-53 28-11 22 4 18 45° J, L = Al.; K, M = Ch.; Balance = Cu.
28-58 28-20 14 10 4 45° A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu.
28-61 28-21 37 37 45° A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con.
28-63 28-20 14 10 4 45° A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu.
28-64 28-15 35 35 None A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.;
Balance = Cu.
28-65 28-12 26 26 None A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con; Y,
a = Ch.; b, d = Cu.
28-67 28-16 20 20 None U = Con.; Balance = Cu.
28-68 28-15 35 35 45° T = Al.; U = Ch.; Balance = Cu.
28-69 28-11 22 4 18 None G = Al.; R = Ch.; Balance = Cu.
28-70 28-11 22 4 18 None A = Al.; B = Ch.; Balance = Cu.
28-77 28-11 22 4 18 None J = Con.; Balance = Cu.
28-81 28-21 37 37 None A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k = Ch.;
Balance = Cu.
28-85 28-11 22 4 18 45° K, M = Al.; J, L = Ch.; Bal. = Cu.
28-91 28-9 12 6 6 None M = Ir.; L = Con.; Bal. = Cu.
28-94 28-12 26 26 None B, D, F, H, K, M, P, S, U, W, Y, a, d = Al.; Bal. = Ch.
28-98 28-21 37 37 None M = Al.; F = Ch.; Bal. = Cu.
28-99 28-12 26 26 None B, D, F, H, K, M, P, S, U, W, Y, a = Con.; Bal. = Cu.
28-AC 28-16 20 20 None A, C, E, G, J, L = Ir.; B, D, F, N, K, M = Con.; Bal. = Cu.
28-AD 28-21 37 37 45° A, C, F, H, J, K, M, N, T, X, Z, a, d, h, k, m, n, r = Cu.; Bal. = Cu.
28-AE 28-21 37 37 None A, C, E, G, J, L, N, R, T, V, X, a, c, e, g, j, m, p. s = Cu.; Bal. = Con.
28-AF 28-18 12 12 None A, C, E, G, J, L = Ch.; Bal. = Al.
28-AG 28-12 26 26 None A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; Bal. = Cu.
28-AK 28-21 37 37 45° A, B, C, D, J, K, L, M, N, P, a, b, c, d, e, m, p = Ch.; n = Cu.; Bal. = Al.
32-51 32-8 30 6 24 90° M = Ch.; N = Al.; Balance = Cu.
32-55 32-8 30 6 24 125° M, N = Ch.; O, P = Al.; Balance = Cu.
32-91 32-64 54 54 None A, C, E, G, J, L, N, P, S, U, W, Y, a, c, e, g, j, m = Ir.; B, D, F, H, K, M, O,
R, T, V, X, Z, b, d, f, h, k, n = Con.; Bal. = Cu.
36-53 36-7 47 7 40 45° u, v, w = Al.; x, y, z = Ch.; Balance = Cu.
36-56 36-10 48 48 None A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Bal. = Cu.
36-57 36-8 47 1 46 None W = Al.; f = Ch.; Balance = Cu.
36-58 36-15 35 35 None H = Al.; G = Ch.; Balance = Cu.
36-61 36-15 35 35 None A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu.
36-62 36-10 48 48 None A, C, E = Al.; B, D, F = Ch.; Balance = Cu.
36-82 36-52* 52 52 None v, g = Ir.; p, y, c = Con.; x = Ch.; Balance = Cu.
52
QWLD
thermocouple arrangements
* Amphenol arrangement
Shell Size
and Arrg.
Similar to
MS Arrg.
Total
Contacts
Contact
Size Pin Insert
Rotation
CW
Contact Material
12 16
36-86 36-10 48 48 None
A, C, E, G, J, L, N, P, R, T, V, X = Al.; B, D, F, H, K, M, O, Q,
S, U, W, Y = Ch.; z, b, d, f, h, k, n, q, s, u, w, y = Con.;
a, c, e, g, j, m, p, r, t, v, x, z = Cu.
36-88 36-52 52 52 None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z,
AB, AD, AF = Cu.; Bal. = Con.
40-58 40-56* 85 85 None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN,
AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Balance = Con.
40-59 40-56* 85 85 None B = Ch.; C = Con.; Balance = Cu.
40-77 40-53* 60 60 None 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu.
40-78 40-53* 60 60 None 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.;
43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu.
40-88 40-53 60 60 None 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39,
41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = Con.; Bal. = Cu.
40-AA 40-56 85 85 None
A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF,
AJ, AL, AN, AR, AT = Cu.; B, D, F, J, L, N, R, T, V, X, Z, b, d, g, i, k, n,
q, s, u, w, y, AA, AC, AE, AH, AK, AM, AP, AS = Con.; AU, AW, AY, BA,
BC, BE, BH, BK, BM, BP, BS, BU = Cu.; AV, AX, AZ, BB, BD, BF, BJ, BL,
BN, BR, BT, BV = Al.
44-57 44-52 104 104 None A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con.
44-59 44-52 104 104 None 34 = Con.; 70 = Cu.
44-60 44-52 104 104 None A, C, E, etc. = Ch., (52); B, D, F, etc. = Al., (52)
44-62 44-52 104 104 None BY, BZ, CA, CB, CC, CD, CE, CR = Al.; CH, CJ, CK, CL, CM, CN, CP,
CS = Ch.; Bal. = Cu.
53
MIL-C-22992, QWLD
MS17343 or 10-1940XX
wall mount receptacle
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
†Shell size 48 available in proprietary versions only. Consult Sidney, NY for availability and ordering information.
Part
Number*
Shell
Size
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
B
Min
Full
Thd
K
+.021
–.020
M
+.010
–.000
R
(TP)
S
+.021
–.020
T
Dia
+.004
–.003
V
Thread
Class 2A-LH
(Plated)
W
±.010
Z
Max
10-194013 12 .8750 .672 .937 .797 .906 1.188 .150 .750-20UNEF .640 .700
10-194015 14 1.0000 .672 .937 .797 .969 1.281 .150 .875-20UNEF .640 .700
10-194017 16 1.1250 .672 .937 .797 1.062 1.375 .150 1.000-20UNEF .640 .700
10-194018 18 1.2500 .672 .953 .797 1.156 1.500 .177 1.125-18UNEF .625 .686
10-194020 20 1.3750 .672 .953 .797 1.250 1.625 .177 1.250-18UNEF .625 .686
10-194022 22 1.5000 .672 .953 .797 1.375 1.750 .177 1.375-18UNEF .625 .686
10-194024 24 1.7500 .672 1.047 .859 1.562 2.000 .177 1.625-18UNEF .594 .585
10-194028 28 2.0000 .672 1.047 .859 1.750 2.250 .177 1.875-16UN .594 .591
10-194032 32 2.2500 .672 1.109 .922 1.938 2.500 .209 2.0625-16UNS .530 .528
10-194036 36 2.5000 .672 1.109 .922 2.188 2.750 .209 2.3125-16UNS .530 .528
10-194040 40 2.7500 .672 1.109 .922 2.375 3.000 .209 2.625-16UN .703 .528
10-194044 44 3.0000 .672 1.109 .922 2.625 3.250 .209 2.875-16UN .703 .770
10-194048† 48† 3.2500 .672 1.109 .922 2.875 3.500 .209 3.125-16UN .703 .770
All dimensions for reference only.
R
(TP)
S
T
4 HOLES
S
R
(TP)
A
B
V
LEFT HAND
K
MW
Z
54
MIL-C-22992, QWLD
MS17345 or 10-1941XX
cable connecting plug
All dimensions for reference only.
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
Part
Number*
Shell
Size
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
B
+.016
–.000
K
+.021
–.020
S
+.021
–.020
V
Thread
Class 2A-LH
(Plated)
W
±.010
Z
Max
10-194113 12 .8750 .688 .938 1.000 .750-20UNEF .641 .696
10-194115 14 1.0000 .688 .938 1.094 .875-20UNEF .641 .696
10-194117 16 1.1250 .688 .938 1.281 1.000-20UNEF .641 .696
10-194118 18 1.2500 .703 .957 1.375 1.125-18UNEF .625 .680
10-194120 20 1.3750 .703 .957 1.500 1.250-18UNEF .625 .680
10-194122 22 1.5000 .703 .957 1.625 1.375-18UNEF .625 .680
10-194124 24 1.7500 .766 1.016 1.875 1.625-18UNEF .625 .617
10-194128 28 2.0000 .766 1.016 2.125 1.875-16UN .625 .617
10-194132 32 2.2500 .703 1.078 2.375 2.0625-16UN .563 .555
10-194136 36 2.5000 .703 1.078 2.625 2.3125-16UN .563 .555
10-194140 40 2.7500 .703 1.078 3.000 2.625-16UN .703 .555
10-194144 44 3.0000 .703 1.078 3.250 2.875-16UN .703 .805
S
S
A
B
KZ
W
V
LEFT HAND
55
S
R
(TP)
T
4 HOLES
R
(TP) S
K
M
Z
W
Y
A
B
MIL-C-22992, QWLD
MS17346 or 10-1942XX
box mount receptacle
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
Part
Number*
Shell
Size
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
B
Min
Full
Thd
K
+.021
–.010
M
+.010
–.000
R
(TP)
S
+.021
–.020
T
Dia
+.004
–.003
W
+.020
–.030
Y
+.011
–.010
Z
Max
10-194213 12 .8750 .672 .938 .797 .906 1.188 .150 .640 .640 .700
10-194215 14 1.0000 .672 .938 .797 .969 1.281 .150 .640 .765 .700
10-194217 16 1.1250 .672 .938 .797 1.062 1.375 .150 .640 .890 .700
10-194218 18 1.2500 .672 .953 .797 1.156 1.500 .177 .625 1.015 .686
10-194220 20 1.3750 .672 .953 .797 1.250 1.625 .177 .625 1.171 .686
10-194222 22 1.5000 .672 .953 .797 1.375 1.750 .177 .625 1.296 .686
10-194224 24 1.7500 .672 1.047 .859 1.562 2.000 .177 .594 1.421 .585
10-194228 28 2.0000 .672 1.047 .859 1.750 2.250 .177 .594 1.625 .591
10-194232 32 2.2500 .672 1.110 .922 1.938 2.500 .209 .531 1.891 .528
10-194236 36 2.5000 .672 1.110 .922 2.188 2.750 .209 .531 2.078 .528
10-194240 40 2.7500 .672 1.110 .922 2.375 3.000 .209 .531 2.312 .528
10-194244 44 3.0000 .672 1.110 .922 2.625 3.250 .209 .531 2.562 .778
All dimensions for reference only.
56
MIL-C-22992, QWLD
MS17347 or 10-1943XX
jam nut receptacle (wall mount)
All dimensions for reference only.
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
Part
Number*
Shell
Size
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stud
E
Thread
Class 2A
(Plated)
F
Hex
+.017
–.016
H
Panel
Thickness M
±.010
N
+.021
–.020
P
±.010
S
+.011
–.010
V
Thread
Class 2A-LH
(Plated)
W
±.010
Z
MaxMin Max
10-194313 12 .8750 1.000-20UNEF 1.250 .094 .188 1.141 .641 .486 1.375 .750-20UNEF .516 .483
10-194315 14 1.0000 1.125-18UNEF 1.312 .094 .188 1.141 .641 .530 1.500 .875-20UNEF .516 .483
10-194317 16 1.1250 1.250-18UNEF 1.500 .094 .188 1.141 .703 .623 1.750 1.000-20UNEF .516 .483
10-194318 18 1.2500 1.375-18UNEF 1.562 .094 .203 1.156 .703 .663 1.875 1.125-18UNEF .516 .467
10-194320 20 1.3750 1.500-18UNEF 1.750 .094 .203 1.156 .703 .707 2.000 1.250-18UNEF .516 .467
10-194322 22 1.5000 1.625-18UNEF 1.875 .094 .203 1.156 .703 .751 2.125 1.375-18UNEF .516 .467
10-194324 24 1.7500 1.875-16UN 2.125 .094 .265 1.219 .703 .840 2.375 1.625-18UNEF .516 .404
10-194328 28 2.0000 2.125-16UN 2.375 .094 .277 1.231 .785 .928 2.625 1.875-16UN .516 .392
10-194332 32 2.2500 2.375-16UN 2.625 .094 .215 1.231 .785 1.017 2.875 2.0625-16UN .516 .392
10-194336 36 2.5000 2.625-16UN 2.875 .094 .215 1.231 .785 1.104 3.125 2.3125-16UN .516 .392
10-194340 40 2.7500 2.875-16UN 3.125 .094 .215 1.231 .972 1.213 3.406 2.625-16UN .703 .392
10-194344 44 3.0000 3.125-16UN 3.375 .094 .215 1.231 .972 1.299 3.656 2.875-16UN .703 .642
Shell
Size
K Dia.
+.005
–.000
G
±.003
U
±.005
12,13 1.005 .562 .688
14,15 1.130 .606 .750
16,17 1.255 .699 .875
18 1.380 .739 .938
20 1.505 .783 1.000
22 1.630 .830 1.062
24 1.880 .919 1.188
28 2.130 1.007 1.312
32 2.380 1.096 1.438
36 2.630 1.183 1.562
40 2.880 1.292 1.703
MOUNTING DIMENSIONS
S
F
P
S
P
M
H
Z
N
W
A
V
LEFT HAND
.632
±.010 E
U
G
K
U
G
.125 ±.002
DIA. PIN
57
QWLD
10-1944XX
thru bulkhead receptacle
All dimensions for reference only.
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
†Shell size 48 available in proprietary versions only. Consult Sidney, NY for availability and ordering information.
Part
Number*
Shell
Size
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
H
Max
L
±.015
M
+.000
–.010
R
(TP)
S
+.021
–.020
T
Dia
+.004
–.003
10-194413 12 .8750 .312 2.219 1.032 .906 1.188 .150
10-194415 14 1.0000 .312 2.219 1.032 .969 1.281 .150
10-194417 16 1.1250 .312 2.219 1.032 1.062 1.375 .150
10-194418 18 1.2500 .312 2.219 1.032 1.156 1.500 .177
10-194420 20 1.3750 .312 2.219 1.032 1.250 1.625 .177
10-194422 22 1.5000 .312 2.219 1.032 1.375 1.750 .177
10-194424 24 1.7500 .312 2.219 1.032 1.562 2.000 .177
10-194428 28 2.0000 .312 2.219 1.032 1.750 2.250 .177
10-194432 32 2.2500 .312 2.219 1.032 1.938 2.500 .209
10-194436 36 2.5000 .312 2.219 1.032 2.188 2.750 .209
10-194440 40 2.7500 .312 2.219 1.032 2.375 3.000 .209
10-194444 44 3.0000 .447 2.469 1.157 2.625 3.250 .209
10-194448† 48† 3.2500 .447 2.469 1.157 2.875 3.500 .209
T
4 HOLES
S
R
(TP)
S
R
(TP)
L
M
H
A
M
A
.672 MIN.
FULL THREAD .672 MIN.
FULL THREAD
.155
58
MIL-C-22992, QWLD
MS17344 or 10-1946XX
straight plug
All dimensions for reference only.
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
Part
Number*
Shell
Size
A Thread
Class 2B
0.1P-0.2L
Double Stub B
D
+.010
–.001 G
N
+.011
–.010
Q
Dia
Max
V
Thread
Class 2A-LH
(Plated)
Z
Max
10-194613 12 .8750 .519±.020 .985 .030±.030 .738 1.156 .750-20UNEF .807
10-194615 14 1.0000 .519±.020 1.109 .013±.030 .738 1.281 .875-20UNEF .807
10-194617 16 1.1250 .519±.020 1.235 .091±.030 .738 1.469 1.000-20UNEF .807
10-194618 18 1.2500 .519±.020 1.359 .216±.030 .738 1.563 1.125-18UNEF .807
10-194620 20 1.3750 .519±.020 1.485 .216±.030 .738 1.688 1.250-18UNEF .807
10-194622 22 1.5000 .519±.020 1.609 .216±.030 .738 1.844 1.375-18UNEF .807
10-194624 24 1.7500 .519±.020 1.859 .184±.030 .800 2.094 1.625-18UNEF .807
10-194628 28 2.0000 .519±.020 2.109 .184±.030 .800 2.344 1.875-16UN .807
10-194632 32 2.2500 .525±.026 2.359 .190±.033 .875 2.594 2.0625-16UNS .807
10-194636 36 2.5000 .525±.026 2.609 .234±.033 .875 2.844 2.3125-16UNS .807
10-194640 40 2.7500 .710±.023 2.922 .049±.030 1.041 3.156 2.625-16UN .807
10-194644 44 3.0000 .710±.023 3.172 .049±.030 1.041 3.406 2.875-16UN .957
N
Z
B
.766
±.005
DV
LEFT
HAND
G
A
Q
59
MIL-C-22992, QWLD
MS17348 or 10-1949XX
jam nut receptacle (box mount)
Shell
Size
K Dia.
+.005
–.000
G
±.003
U
±.005
12,13 1.005 .562 .688
14,15 1.130 .606 .750
16,17 1.255 .699 .875
18 1.380 .739 .938
20 1.505 .783 1.000
22 1.630 .830 1.062
24 1.880 .919 1.188
28 2.130 1.007 1.312
32 2.380 1.096 1.438
36 2.630 1.183 1.562
40 2.880 1.292 1.703
MOUNTING DIMENSIONS
All dimensions for reference only.
*To complete 10- part number or to complete MS part number, see how to order, pg. 22.
Part
Number
Shell
Size
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
C
+.006
–.005
E
Thread
Class 2A
(Plated)
F
Hex
+.017
–.016
H
Panel
Thickness L
+.011
–.010
M
±.010
P
±.010
S
+.011
–.010
Y
+.011
–.010
Z
MaxMin Max
10-194913 12 .8750 .125 1.000-20UNEF 1.250 .094 .297 1.578 1.235 .486 1.375 .640 .389
10-194915 14 1.0000 .125 1.125-18UNEF 1.312 .094 .297 1.578 1.235 .530 1.500 .765 .389
10-194917 16 1.1250 .188 1.250-18UNEF 1.500 .094 .297 1.578 1.235 .623 1.750 .890 .389
10-194918 18 1.2500 .188 1.375-18UNEF 1.562 .094 .266 1.578 1.203 .663 1.875 1.015 .421
10-194920 20 1.3750 .188 1.500-18UNEF 1.750 .094 .266 1.578 1.203 .707 2.000 1.171 .421
10-194922 22 1.5000 .188 1.625-18UNEF 1.875 .094 .266 1.578 1.203 .751 2.125 1.296 .421
10-194924 24 1.7500 .188 1.875-16UN 2.125 .094 .328 1.641 1.266 .840 2.375 1.421 .358
10-194928 28 2.0000 .219 2.125-16UN 2.375 .094 .328 1.641 1.329 .928 2.625 1.625 .295
10-194932 32 2.2500 .219 2.375-16UN 2.625 .094 .328 1.641 1.329 1.017 2.875 1.891 .295
10-194936 36 2.5000 .219 2.625-16UN 2.875 .094 .328 1.641 1.329 1.104 3.125 2.078 .295
10-194940 40 2.7500 .219 2.875-16UN 3.125 .094 .328 1.641 1.329 1.213 3.406 2.312 .295
10-194944 44 3.0000 .219 3.125-16UN 3.375 .094 .328 1.641 1.329 1.299 3.656 2.562 .545
G
U
GU
K
.125 ±.003
DIA. PIN
S
F
P
S
P
L
MZ
H
A
EC
.632
±.010
Y
60
B
L
1.500
MAX
R
R
K
G
D
LEFT HAND
H
EF
JC
SECTION R-R
Q
C
B
L
J
E
H
F
KD
LEFT HAND
G
Q
1.500
MAX
H
EF
A
K
D
LEFT HAND
Q
A
GC
B
L
J
1.500
MAX.
SECTION A-A
MIL-C-22992, QWLD Accessories
M85049 or 10-522958
cable sealing adapters (plug)
Type I
Type II
Type III
61
MIL-C-22992, QWLD Accessories
M85049 or 10-522958
cable sealing adapters (plug)
All dimensions for reference only.
* Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part
number (column 1) or Proprietary part number (column 3).
MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed.
10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-.
MS Part
Number*
Superseded
MS Part
Number
Proprietary
Part
Number*
Used
With
Shell
Size
Cable
Range B
+.000
–.010
C
+.000
–.010
D
Thread
Class 2B-LH
E
Free
Length
Max
F
+.010
–.020
G
Dia
+.010
–.020
H
Max
J
±.031
K
+.015
–.025
L Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
Q
Approx. Type
Max
Dia
Min
Dia
M85049/4A1A1 MS17342N1A1 10-522958-131 12 .530 .436 1.000 .812 .750-20UNEF 1.062 2.719 .938 4.275 1.375 1.219 .8750 5.000 III
M85049/4A2A1 MS17342N2A1 10-522958-132 12 .500 .406 .875 .938 .750-20UNEF .969 2.215 .938 3.678 1.125 .871 .8750 5.000 III
M85049/4A3A1 MS17342N3A1 10-522958-133 12 .405 .311 1.000 .812 .750-20UNEF 1.062 2.719 .938 4.275 1.375 1.219 .8750 5.000 III
M85049/3A1A1 MS17340N1A1 10-522958-134 12 .375 .281 .750 .812 .750-20UNEF .969 1.902 .938 3.365 1.062 .621 .8750 5.000 I
M85049/3A2A1 MS17340N2A1 10-522958-135 12 .281 .188 .750 .812 .750-20UNEF .969 1.902 .938 3.365 1.062 .621 .8750 5.000 I
M85049/5A1A1 MS17341N1A1 10-522958-136 12 .250 .156 .825 .812 .750-20UNEF .906 1.782 .938 3.182 .938 .563 .8750 5.000 II
M85049/4A5A1 MS17342N5A1 10-522958-151 14 .625 .531 1.062 1.125 .875-20UNEF 1.062 2.933 1.062 4.489 1.562 1.371 1.0000 5.000 III
M85049/4A4A1 MS17342N4A1 10-522958-152 14 .605 .511 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III
M85049/4A6A1 MS17342N6A1 10-522958-153 14 .530 .436 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III
M85049/3A3A1 MS17340N3A1 10-522958-154 14 .438 .344 .875 .938 .875-20UNEF .969 2.215 1.062 3.678 1.125 .871 1.0000 5.000 I
M85049/4A7A1 MS17342N7A1 10-522958-155 14 .405 .311 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III
M85049/3A4A1 MS17340N4A1 10-522958-171 16 .605 .511 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I
M85049/3A5A1 MS17340N5A1 10-522958-172 16 .530 .436 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I
M85049/3A6A1 MS17340N6A1 10-522958-173 16 .405 .311 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I
M85049/4A8A1 MS17342N8A1 10-522958-181 18 .828 .715 1.188 1.250 1.125-18UNEF 1.094 2.996 1.312 4.584 1.688 1.343 1.2500 5.000 III
M85049/3A8A1 MS17340N8A1 10-522958-182 18 .699 .605 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I
M85049/3A7A1 MS17340N7A1 10-522958-183 18 .625 .531 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I
M85049/5A5A1 MS17341N5A1 10-522958-184 18 .605 .511 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 5.000 II
M85049/5A6A1 MS17341N6A1 10-522958-185 18 .530 .436 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 5.000 II
M85049/3A9A1 MS17340N9A1 10-522958-186 18 .500 .406 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I
M85049/3A10A1 MS17340N10A1 10-522958-187 18 .455 .361 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I
M85049/5A2A1 MS17341N2A1 10-522958-188 18 .375 .281 .750 1.125 1.125-18UNEF .969 2.438 1.312 3.901 1.062 1.157 1.2500 5.000 II
M85049/5A3A1 MS17341N3A1 10-522958-189 18 .375 .281 .875 1.125 1.125-18UNEF .969 2.469 1.312 3.932 1.125 1.125 1.2500 5.000 II
M85049/5A4A1 MS17341N4A1 10-522958-190 18 .281 .188 .750 1.125 1.125-18UNEF .969 2.438 1.312 3.901 1.062 1.157 1.2500 5.000 II
M85049/4A12A1 MS17342N12A1 10-522958-201 20 1.055 .930 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 5.000 III
M85049/4A10A1 MS17342N10A1 10-522958-202 20 1.000 .875 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 5.000 III
M85049/4A11A1 MS17342N11A1 10-522958-203 20 .900 .787 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 5.000 III
M85049/3A11A1 MS17340N11A1 10-522958-204 20 .828 .715 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 5.000 I
M85049/4A9A1 MS17342N9A1 10-522958-205 20 .750 .637 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 5.000 III
M85049/5A7A1 MS17341N7A1 10-522958-206 20 .699 .605 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 5.000 II
M85049/5A9A1 MS17341N9A1 10-522958-207 20 .605 .511 1.000 1.250 1.250-18UNEF 1.062 2.750 1.438 4.308 1.375 1.250 1.3750 5.000 II
M85049/3A12A1 MS17340N12A1 10-522958-208 20 .562 .449 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 5.000 I
M85049/5A8A1 MS17341N8A1 10-522958-209 20 .455 .361 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 5.000 II
M85049/4A14A1 MS17342N14A1 10-522958-221 22 1.109 .984 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 6.000 III
M85049/4A13A1 MS17342N13A1 10-522958-222 22 1.000 .875 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 6.000 III
M85049/3A14A1 MS17340N14A1 10-522958-223 22 .900 .787 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I
M85049/5A14A1 MS17341N14A1 10-522958-224 22 .828 .715 1.188 1.406 1.375-18UNEF 1.094 2.996 1.562 4.306 1.375 1.250 1.5000 6.000 II
M85049/3A15A1 MS17340N15A1 10-522958-225 22 .805 .692 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I
M85049/3A13A1 MS17340N13A1 10-522958-226 22 .750 .637 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I
M85049/5A10A1 MS17341N10A1 10-522958-227 22 .562 .449 1.188 1.406 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 II
M85049/5A11A1 MS17341N11A1 10-522958-228 22 .405 .311 1.000 1.375 1.375-18UNEF 1.062 2.750 1.562 4.306 1.375 1.250 1.5000 6.000 II
62
MIL-C-22992, QWLD Accessories
M85049 or 10-522958
cable sealing adapters (plug)
All dimensions for reference only.
* Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part
number (column 1) or Proprietary part number (column 3).
MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed.
10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-.
MS Part
Number*
Superseded
MS Part
Number
Proprietary
Part
Number*
Used
With
Shell
Size
Cable
Range B
+.000
–.010
C
+.000
–.010
D
Thread
Class 2B-LH
E
Free
Length
Max
F
+.010
–.020
G
Dia
+.010
–.020
H
Max
J
±.031
K
+.015
–.025
L Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
Q
Approx. Type
Max
Dia
Min
Dia
M85049/4A18A1 MS17342N18A1 10-522958-241 24 1.375 1.250 2.000 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.625 1.309 1.7500 6.000 III
M85049/4A16A1 MS17342N16A1 10-522958-242 24 1.310 1.185 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III
M85049/4A17A1 MS17342N17A1 10-522958-243 24 1.230 1.105 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III
M85049/4A15A1 MS17342N15A1 10-522958-244 24 1.180 1.055 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III
M85049/3A18A1 MS17340N18A1 10-522958-245 24 1.109 .984 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I
M85049/3A16A1 MS17340N16A1 10-522958-246 24 1.055 .930 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I
M85049/3A17A1 MS17340N17A1 10-522958-247 24 1.000 .675 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I
M85049/5A16A1 MS17341N16A1 10-522958-248 24 .970 .857 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II
M85049/5A13A1 MS17341N13A1 10-522958-249 24 .900 .787 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II
M85049/5A19A1 MS17340N19A1 10-522958-250 24 .880 .755 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I
M85049/5A17A1 MS17341N17A1 10-522958-251 24 .828 .715 1.188 1.625 1.625-18UNEF 1.094 2.954 1.812 4.542 1.688 1.301 1.7500 6.000 II
M85049/5A18A1 MS17341N18A1 10-522958-252 24 .805 .692 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II
M85049/5A15A1 MS17341N15A1 10-522958-253 24 .750 .637 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II
M85049/5A14A1 MS17341N14A1 10-522958-254 24 .630 .517 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II
M85049/4A20A1 MS17342N20A1 10-522958-281 28 1.531 1.406 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III
M85049/4A19A1 MS17342N19A1 10-522958-282 28 1.445 1.320 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III
M85049/4A21A1 MS17342N21A1 10-522958-283 28 1.375 1.250 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III
M85049/4A22A1 MS17340N22A1 10-522958-284 28 1.310 1.185 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I
M85049/3A21A1 MS17340N21A1 10-522958-285 28 1.230 1.105 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I
M85049/3A20A1 MS17340N20A1 10-522958-286 28 1.180 1.055 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I
M85049/5A20A1 MS17341N20A1 10-522958-287 28 1.109 .984 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II
M85049/5A24A1 MS17341N24A1 10-522958-288 28 1.100 .875 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II
M85049/5A23A1 MS17341N23A1 10-522958-289 28 .970 .857 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II
M85049/5A19A1 MS17341N19A1 10-522958-290 28 .880 .755 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II
M85049/5A21A1 MS17341N21A1 10-522958-291 28 .750 .637 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II
M85049/5A26A1 MS17341N26A1 10-522958-292 28 .680 .567 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II
M85049/5A25A1 MS17341N25A1 10-522958-293 28 .530 .436 1.000 1.812 1.875-16UN 1.062 2.875 2.062 4.431 1.375 1.375 2.000 6.000 II
M85049/5A22A1 MS17341N22A1 10-522958-294 28 .375 .281 .875 1.875 1.875-16UN .969 2.766 2.062 4.229 1.125 1.422 2.000 6.000 II
M85049/4A23A1 MS17342N23A1 10-522958-321 32 1.828 1.700 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 6.000 III
M85049/4A25A1 MS17342N25A1 10-522958-322 32 1.730 1.605 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 6.000 III
M85049/4A22A1 MS17342N22A1 10-522958-323 32 1.656 1.531 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 6.000 III
M85049/4A24A1 MS17342N24A1 10-522958-324 32 1.562 1.437 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 6.000 III
M85049/3A24A1 MS17340N24A1 10-522958-325 32 1.531 1.406 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I
M85049/3A23A1 MS17340N23A1 10-522958-326 32 1.445 1.320 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I
M85049/3A25A1 MS17340N25A1 10-522958-327 32 1.375 1.250 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I
M85049/5A28A1 MS17341N28A1 10-522958-328 32 1.230 1.150 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 6.000 II
M85049/5A35A1 MS17341N35A1 10-522958-329 32 1.130 1.005 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 6.000 II
M85049/5A31A1 MS17341N31A1 10-522958-330 32 1.109 .984 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II
M85049/5A27A1 MS17341N27A1 10-522958-331 32 1.055 .930 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II
M85049/5A32A1 MS17341N32A1 10-522958-332 32 .970 .857 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 6.000 II
M85049/5A30A1 MS17341N30A1 10-522958-333 32 .880 .755 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II
M85049/5A29A1 MS17341N29A1 10-522958-334 32 .750 .637 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 6.000 II
63
MIL-C-22992, QWLD Accessories
M85049 or 10-522958
cable sealing adapters (plug)
All dimensions for reference only.
* Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part
number (column 1) or Proprietary part number (column 3).
MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed.
10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-.
MS Part
Number*
Superseded
MS Part
Number
Proprietary
Part
Number*
Used
With
Shell
Size
Cable
Range B
+.000
–.010
C
+.000
–.010
D
Thread
Class 2B-LH
E
Free
Length
Max
F
+.010
–.020
G
Dia
+.010
–.020
H
Max
J
±.031
K
+.015
–.025
L Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
Q
Approx. Type
Max
Dia
Min
Dia
M85049/5A34A1 MS17341N34A1 10-522958-335 32 .530 .436 1.000 2.000 2.0625-16UN 1.062 2.875 2.312 4.431 1.375 1.375 2.2500 6.000 II
M85049/5A33A1 MS17341N33A1 10-522958-336 32 .375 .281 .875 2.062 2.0625-16UN .969 2.813 2.312 4.276 1.125 1.469 2.2500 6.000 II
M85049/4A30A1 MS17342N30A1 10-522958-361 36 2.062 1.917 2.750 2.500 2.3125-16UN 1.391 3.500 2.562 5.385 3.375 1.375 2.5000 6.000 III
M85049/4A29A1 MS17342N29A1 10-522958-362 36 1.984 1.859 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III
M85049/4A26A1 MS17342N26A1 10-522958-363 36 1.900 1.775 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III
M85049/4A28A1 MS17342N28A1 10-522958-364 36 1.825 1.799 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III
M85049/4A27A1 MS17342N27A1 10-522958-365 36 1.730 1.605 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III
M85049/3A26A1 MS17340N26A1 10-522958-366 36 1.656 1.531 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 6.000 I
M85049/3A27A1 MS17340N27A1 10-522958-367 36 1.562 1.437 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 6.000 I
M85049/5A40A1 MS17341N40A1 10-522958-368 36 1.445 1.320 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 6.000 II
M85049/5A38A1 MS17341N38A1 10-522958-369 36 1.375 1.250 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 6.000 II
M85049/5A36A1 MS17341N36A1 10-522958-370 36 1.310 1.185 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II
M85049/5A42A1 MS17341N42A1 10-522958-371 36 1.230 1.105 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II
M85049/5A39A1 MS17341N39A1 10-522958-372 36 1.180 1.055 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II
M85049/5A37A1 MS17341N37A1 10-522958-373 36 1.109 .984 1.546 2.312 2.3125-16UN 1.281 3.121 2.562 4.896 2.125 1.371 2.5000 6.000 II
M85049/5A41A1 MS17341N41A1 10-522958-374 36 .970 .857 1.312 2.250 2.3125-16UN 1.094 3.063 2.562 4.651 1.812 1.375 2.5000 6.000 II
M85049/4A31A1 MS17342N31A1 10-522958-401 40 2.375 2.230 3.000 2.812 2.625-16UN 1.391 3.609 2.875 5.682 3.625 1.421 2.7500 6.000 III
M85049/4A32A1 MS17342N32A1 10-522958-402 40 2.250 2.105 2.875 2.625 2.625-16UN 1.391 3.609 2.875 5.682 3.500 1.421 2.7500 6.000 III
M85049/4A33A1 MS17342N33A1 10-522958-403 40 2.145 2.000 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 6.000 III
M85049/4A34A1 MS17342N34A1 10-522958-404 40 2.062 1.917 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 6.000 III
M85049/5A43A1 MS17341N43A1 10-522958-405 40 1.940 1.815 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II
M85049/5A44A1 MS17341N44A1 10-522958-406 40 1.825 1.700 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II
M85049/5A45A1 MS17341N45A1 10-522958-407 40 1.730 1.605 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II
M85049/5A46A1 MS17341N46A1 10-522958-408 40 1.656 1.531 2.250 2.750 2.625-16UN 1.281 4.094 2.875 6.037 2.953 2.156 2.7500 6.000 II
64
B
R
R
K
G
D
LEFT HAND
H
EF
JC
SECTION R-R
Q
N
P
L
C
B
J
E
H
F
KD
LEFT HAND
G
Q
P
N
L
H
EF
A
K
D
LEFT HAND
Q
A
GC
B
J
SECTION A-A
L
N
P
MIL-C-22992, QWLD Accessories
M85049 or 10-524959
cable sealing adapters (receptacle)
Type I
Type II
Type III
65
MIL-C-22992, QWLD Accessories
M85049 or 10-524959
cable sealing adapters (receptacle)
All dimensions for reference only.
* Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part
number (column 1) or Proprietary part number (column 3).
MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed.
10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-.
MS Part
Number*
Superseded
MS Part
Number
Proprietary
Part
Number*
Used
With
Shell
Size
Cable
Range B
+.000
–.010
C
+.000
–.010
D
Thread
Class 2B-LH
E
Free
Length
Max
F
+.010
–.020
G
Dia
+.010
–.020
H
Max
J
±.031
K
+.015
–.025
L Thread
Class 2A
0.1P-0.2L
Double Stub
N
Dia
Maz
P
Max
Q
Approx. Type
Max
Dia
Min
Dia
M85049/4A1B1 MS17342N1B1 10-524959-131 12 .530 .436 1.000 .812 .750-20UNEF 1.062 2.719 .938 4.275 1.375 1.219 .8750 2.719 .765 5.000 III
M85049/4A2B1 MS17342N2B1 10-524959-132 12 .500 .406 .875 .938 .750-20UNEF .969 2.215 .938 3.678 1.125 .871 .8750 2.719 .765 5.000 III
M85049/4A3B1 MS17342N3B1 10-524959-133 12 .405 .311 1.000 .812 .750-20UNEF 1.062 2.719 .938 4.275 1.375 1.219 .8750 1.094 .765 5.000 III
M85049/3A1B1 MS17340N1B1 10-524959-134 12 .375 .281 .750 .812 .750-20UNEF .969 1.902 .938 3.365 1.062 .621 .8750 1.094 .765 5.000 I
M85049/3A2B1 MS17340N2B1 10-524959-135 12 .281 .188 .750 .812 .750-20UNEF .969 1.902 .938 3.365 1.062 .621 .8750 1.094 .765 5.000 I
M85049/5A1B1 MS17341N1B1 10-524959-136 12 .250 .156 .625 .812 .750-20UNEF .906 1.782 .938 3.182 .938 .563 .8750 1.094 .765 5.000 II
M85049/4A5B1 MS17342N5B1 10-524959-151 14 .625 .531 1.062 1.125 .875-20UNEF 1.062 2.933 1.062 4.489 1.562 1.371 1.0000 1.094 .765 5.000 III
M85049/4A4B1 MS17342N4B1 10-524959-152 14 .605 .511 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 1.094 .765 5.000 III
M85049/4A6B1 MS17342N6B1 10-524959-153 14 .530 .436 1.000 1.062 .875-20UNEF 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 1.094 .765 5.000 III
M85049/3A3B1 MS17340N3B1 10-524959-154 14 .438 .344 .875 .938 .875-20UNEF .969 2.215 1.062 3.678 1.125 .871 1.0000 1.219 .765 5.000 I
M85049/4A7B1 MS17342N7B1 10-524959-155 14 .405 .311 1.000 1.062 .875-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.0000 1.344 .765 5.000 III
M85049/3A4B1 MS17340N4B1 10-524959-171 16 .605 .511 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 1.344 .980 5.000 I
M85049/3A5B1 MS17340N5B1 10-524959-172 16 .530 .436 1.000 1.062 1.000-20UNEF 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 1.344 .980 5.000 I
M85049/3A6B1 MS17340N6B1 10-524959-173 16 .405 .311 1.000 1.062 1.000-20UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.1250 1.344 .980 5.000 I
M85049/4A8B1 MS17342N8B1 10-524959-181 18 .828 .715 1.188 1.250 1.125-18UNEF 1.094 2.996 1.312 4.584 1.688 1.343 1.2500 1.469 .980 5.000 III
M85049/3A8B1 MS17340N8B1 10-524959-182 18 .699 .605 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I
M85049/3A7B1 MS17340N7B1 10-524959-183 18 .625 .531 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I
M85049/5A5B1 MS17341N5B1 10-524959-184 18 .605 .511 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 2.719 .980 5.000 II
M85049/5A6B1 MS17341N6B1 10-524959-185 18 .530 .436 1.000 1.125 1.125-18UNEF 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 2.719 .980 5.000 II
M85049/3A9B1 MS17340N9B1 10-524959-186 18 .500 .406 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I
M85049/3A10B1 MS17340N10B1 10-524959-187 18 .455 .361 1.062 1.125 1.125-18UNEF 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469 .980 5.000 I
M85049/5A2B1 MS17341N2B1 10-524959-188 18 .375 .281 .750 1.125 1.125-18UNEF .969 2.438 1.312 4.901 1.062 1.157 1.2500 2.719 .980 5.000 II
M85049/5A3B1 MS17341N3B1 10-524959-189 18 .375 .281 .875 1.125 1.125-18UNEF .969 2.469 1.312 4.932 1.125 1.125 1.2500 2.719 .980 5.000 II
M85049/5A4B1 MS17341N4B1 10-524959-190 18 .281 .188 .750 1.125 1.125-18UNEF .969 2.438 1.312 4.901 1.062 1.157 1.2500 2.719 .980 5.000 II
M85049/4A12B1 MS17342N12B1 10-524959-201 20 1.055 .930 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 2.719 .980 5.000 III
M85049/4A10B1 MS17342N10B1 10-524959-202 20 1.000 .875 1.546 1.375 1.250-18UNEF 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 2.719 .980 6.000 III
M85049/4A11B1 MS17342N11B1 10-524959-203 20 .900 .787 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 2.719 .980 5.000 III
M85049/3A11B1 MS17340N11B1 10-524959-204 20 .828 .715 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 1.562 .980 5.000 I
M85049/4A9B1 MS17342N9B1 10-524959-205 20 .750 .637 1.312 1.375 1.250-18UNEF 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 2.719 .980 5.000 III
M85049/5A7B1 MS17341N7B1 10-524959-206 20 .699 .605 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.250 1.3750 2.719 .980 5.000 II
M85049/5A9B1 MS17341N9B1 10-524959-207 20 .605 .511 1.000 1.250 1.250-18UNEF 1.062 2.750 1.438 4.306 1.375 1.371 1.3750 1.562 .980 5.000 II
M85049/3A12B1 MS17340N12B1 10-524959-208 20 .562 .449 1.188 1.250 1.250-18UNEF 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 1.562 .980 5.000 I
M85049/5A8B1 MS17341N8B1 10-524959-209 20 .455 .361 1.062 1.250 1.250-18UNEF 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 1.562 .980 5.000 II
M85049/4A14B1 MS17342N14B1 10-524959-221 22 1.109 .984 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 1.562 .980 6.000 III
M85049/4A13B1 MS17342N13B1 10-524959-222 22 1.000 .875 1.546 1.625 1.375-18UNEF 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 1.562 .980 6.000 III
M85049/3A14B1 MS17340N14B1 10-524959-223 22 .900 .787 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688 .980 6.000 I
M85049/5A12B1 MS17341N12B1 10-524959-224 22 .828 .715 1.188 1.406 1.375-18UNEF 1.094 2.996 1.562 4.306 1.375 1.250 1.5000 1.688 .980 6.000 II
M85049/3A15B1 MS17340N15B1 10-524959-225 22 .805 .692 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688 .980 6.000 I
M85049/3A13B1 MS17340N13B1 10-524959-226 22 .750 .637 1.312 1.375 1.375-18UNEF 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688 .980 6.000 I
M85049/5A10B1 MS17341N10B1 10-524959-227 22 .562 .449 1.188 1.406 1.375-18UNEF 1.094 2.996 1.562 4.584 1.688 1.343 1.5000 2.719 .980 6.000 II
M85049/5A11B1 MS17341N11B1 10-524959-228 22 .405 .311 1.000 1.375 1.375-18UNEF 1.062 2.750 1.562 4.306 1.375 1.250 1.5000 2.719 .980 6.000 II
66
MIL-C-22992, QWLD Accessories
M85049 or 10-524959
cable sealing adapters (receptacle)
All dimensions for reference only.
* Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part
number (column 1) or Proprietary part number (column 3).
MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed.
10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-.
MS Part
Number*
Superseded
MS Part
Number
Proprietary
Part
Number*
Used
With
Shell
Size
Cable
Range B
+.000
–.010
C
+.000
–.010
D
Thread
Class 2B-LH
E
Free
Length
Max
F
+.010
–.020
G
Dia
+.010
–.020
H
Max
J
±.031
K
+.015
–.025
L Thread
Class 2A
0.1P-0.2L
Double Stub
N
Dia
Max
P
Max
Q
Approx. Type
Max
Dia
Min
Dia
MS85049/4A18B1 MS17342N18B1 10-524959-241 24 1.375 1.250 2.000 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.625 1.309 1.7500 2.719 .980 6.000 III
MS85049/4A16B1 MS17342N16B1 10-524959-242 24 1.310 1.185 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719 .980 6.000 III
MS85049/4A17B1 MS17342N17B1 10-524959-243 24 1.230 1.105 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719 .980 6.000 III
MS85049/4A15B1 MS17342N15B1 10-524959-244 24 1.180 1.055 1.780 1.875 1.625-18UNEF 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719 .980 6.000 III
MS85049/3A18B1 MS17340N18B1 10-524959-245 24 1.109 .984 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I
MS85049/3A16B1 MS17340N16B1 10-524959-246 24 1.055 .930 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I
MS85049/3A17B1 MS17340N17B1 10-524959-247 24 1.000 .675 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I
MS85049/5A16B1 MS17341N16B1 10-524959-248 24 .970 .857 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II
MS85049/5A13B1 MS17341N13B1 10-524959-249 24 .900 .787 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II
MS85049/3A19B1 MS17340N19B1 10-524959-250 24 .880 .755 1.546 1.625 1.625-18UNEF 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938 .980 6.000 I
MS85049/5A17B1 MS17341N17B1 10-524959-251 24 .828 .715 1.188 1.625 1.625-18UNEF 1.094 2.954 1.812 4.542 1.688 1.301 1.7500 2.719 .980 6.000 II
MS85049/5A18B1 MS17341N18B1 10-524959-252 24 .805 .692 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II
MS85049/5A15B1 MS17341N15B1 10-524959-253 24 .750 .637 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II
MS85049/5A14B1 MS17341N14B1 10-524959-254 24 .630 .517 1.312 1.625 1.625-18UNEF 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719 .980 6.000 II
MS85049/4A20B1 MS17342N20B1 10-524959-281 28 1.531 1.406 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719 .980 6.000 III
MS85049/4A19B1 MS17342N19B1 10-524959-282 28 1.445 1.320 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719 .980 6.000 III
MS85049/4A21B1 MS17342N21B1 10-524959-283 28 1.375 1.250 2.000 2.062 1.875-16UN 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719 .980 6.000 III
MS85049/3A22B1 MS17340N22B1 10-524959-284 28 1.310 1.185 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219 .980 6.000 I
MS85049/3A21B1 MS17340N21B1 10-524959-285 28 1.230 1.105 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219 .980 6.000 I
MS85049/3A20B1 MS17340N20B1 10-524959-286 28 1.180 1.055 1.780 1.875 1.875-16UN 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219 .980 6.000 I
MS85049/5A20B1 MS17341N20B1 10-524959-287 28 1.109 .984 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.279 .980 6.000 II
MS85049/5A24B1 MS17341N24B1 10-524959-288 28 1.000 .875 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.279 .980 6.000 II
MS85049/5A23B1 MS17341N23B1 10-524959-289 28 .970 .857 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.719 .980 6.000 II
MS85049/5A19B1 MS17341N19B1 10-524959-290 28 .880 .755 1.546 1.875 1.875-16UN 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.719 .980 6.000 II
MS85049/5A19B1 MS17341N21B1 10-524959-291 28 .750 .637 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.719 .980 6.000 II
MS85049/5A26B1 MS17341N26B1 10-524959-292 28 .680 .567 1.312 1.875 1.875-16UN 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.219 .980 6.000 II
MS85049/5A25B1 MS17341N25B1 10-524959-293 28 .530 .436 1.000 1.812 1.875-16UN 1.062 2.875 2.062 4.431 1.375 1.375 2.0000 2.219 .980 6.000 II
MS85049/5A22B1 MS17341N22B1 10-524959-294 28 .375 .281 .875 1.875 1.875-16UN .969 2.766 2.062 4.229 1.125 1.422 2.0000 2.219 .980 6.000 II
MS85049/4A23B1 MS17342N23B1 10-524959-321 32 1.828 1.700 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 2.469 .980 6.000 III
MS85049/4A25B1 MS17342N25B1 10-524959-322 32 1.730 1.605 2.438 2.312 2.0625-16UN 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 2.469 .980 6.000 III
MS85049/4A22B1 MS17342N22B1 10-524959-323 32 1.656 1.531 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 2.469 .980 6.000 III
MS85049/4A24B1 MS17342N24B1 10-524959-324 32 1.562 1.437 2.250 2.312 2.0625-16UN 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 2.469 .980 6.000 III
MS85049/3A24B1 MS17340N24B1 10-524959-325 32 1.531 1.406 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469 .980 6.000 I
MS85049/3A23B1 MS17340N23B1 10-524959-326 32 1.445 1.320 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469 .980 6.000 I
MS85049/3A25B1 MS17340N25B1 10-524959-327 32 1.375 1.250 2.000 2.062 2.0625-16UN 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469 .980 6.000 I
MS85049/5A28B1 MS17341N28B1 10-524959-328 32 1.230 1.150 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 2.469 .980 6.000 II
MS85049/5A35B1 MS17341N35B1 10-524959-329 32 1.130 1.005 1.780 2.062 2.0625-16UN 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 2.469 .980 6.000 II
MS85049/5A31B1 MS17341N31B1 10-524959-330 32 1.109 .984 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469 .980 6.000 II
MS85049/5A27B1 MS17341N27B1 10-524959-331 32 1.055 .930 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469 .980 6.000 II
MS85049/5A32B1 MS17341N32B1 10-524959-332 32 .970 .858 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 2.469 .980 6.000 II
MS85049/5A30B1 MS17341N30B1 10-524959-333 32 .880 .755 1.546 2.062 2.0625-16UN 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469 .980 6.000 II
67
MIL-C-22992, QWLD Accessories
M85049 or 10-524959
cable sealing adapters (receptacle)
All dimensions for reference only.
* Ordering procedure: Locate shell size needed (Column 4); select cable diameter range to be accommodated within the shell size (column 5); order by either MS part
number (column 1) or Proprietary part number (column 3).
MS numbers shown are non-conductive finish. To order conductive finish, substitute “W” for “A” in the part number listed.
10- numbers shown are non-conductive finish. To order conductive finish, substitute prefix 88-.
MS Part
Number*
Superseded
MS Part
Number
Proprietary
Part
Number*
Used
With
Shell
Size
Cable
Range B
+.000
–.010
C
+.000
–.010
D
Thread
Class 2B-LH
E
Free
Length
Max
F
+.010
–.020
G
Dia
+.010
–.020
H
Max
J
±.031
K
+.015
–.025
L Thread
Class 2A
0.1P-0.2L
Double Stub
N
Dia
Max
P
Max
Q
Approx. Type
Max
Dia
Min
Dia
M85049/5A29B1 MS17341N29B1 10-524959-334 32 .750 .637 1.312 2.062 2.0625-16UN 1.094 3.059 2.312 4.647 1.612 1.371 2.2500 2.469 .980 6.000 II
M85049/5A34B1 MS17341N34B1 10-524959-335 32 .530 .436 1.000 2.000 2.0625-16UN 1.062 2.875 2.312 4.431 1.375 1.375 2.2500 2.469 .980 6.000 II
M85049/5A53B1 MS17341N33B1 10-524959-336 32 .375 .281 .875 2.062 2.0625-16UN .969 2.813 2.312 4.276 1.125 1.469 2.2500 2.469 .980 6.000 II
M85049/4A30A1 MS17342N30B1 10-524959-361 36 2.062 1.917 2.750 2.500 2.3125-16UN 1.391 3.500 2.562 5.385 3.375 1.375 2.5000 2.719 .980 6.000 III
M85049/4A29B1 MS17342N29B1 10-524959-362 36 1.984 1.859 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III
M85049/4A26B1 MS17342N26B1 10-524959-363 36 1.900 1.775 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III
M85049/4A28B1 MS17342N28B1 10-524959-364 36 1.825 1.700 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III
M85049/4A27B1 MS17342N27B1 10-524959-365 36 1.730 1.605 2.438 2.500 2.3125-16UN 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719 .980 6.000 III
M85049/3A26B1 MS17340N26B1 10-524959-366 36 1.656 1.531 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 2.719 .980 6.000 I
M85049/3A27B1 MS17340N27B1 10-524959-367 36 1.562 1.437 2.250 2.312 2.3125-16UN 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 2.719 .980 6.000 I
M85049/5A40B1 MS17341N40B1 10-524959-368 36 1.445 1.320 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 2.719 .980 6.000 II
M85049/5A38B1 MS17341N38B1 10-524959-369 36 1.375 1.250 2.000 2.312 2.3125-16UN 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 2.719 .980 6.000 II
M85049/5A36B1 MS17341N36B1 10-524959-370 36 1.310 1.185 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719 .980 6.000 II
M85049/5A42B1 MS17341N42B1 10-524959-371 36 1.230 1.105 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719 .980 6.000 II
M85049/5A39B1 MS17341N39B1 10-524959-372 36 1.180 1.055 1.780 2.312 2.3125-16UN 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719 .980 6.000 II
M85049/5A37B1 MS17341N37B1 10-524959-373 36 1.109 .984 1.546 2.312 2.3125-16UN 1.281 3.121 2.562 4.896 2.125 1.371 2.5000 2.719 .980 6.000 II
M85049/5A41B1 MS17341N41B1 10-524959-374 36 .970 .857 1.312 2.250 2.3125-16UN 1.094 3.063 2.562 4.651 1.812 1.375 2.5000 2.719 .980 6.000 II
M85049/4A31B1 MS17342N31B1 10-524959-401 40 2.375 2.230 3.000 2.812 2.625-16UN 1.391 3.609 2.875 5.682 3.625 1.421 2.7500 2.969 .980 6.000 III
M85049/4A32B1 MS17342N32B1 10-524959-402 40 2.250 2.105 2.875 2.625 2.625-16UN 1.391 3.609 2.875 5.682 3.500 1.421 2.7500 2.969 .980 6.000 III
M85049/4A33B1 MS17342N33B1 10-524959-403 40 2.145 2.000 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 2.969 .980 6.000 III
M85049/4A34B1 MS17342N34B1 10-524959-404 40 2.062 1.917 2.750 2.625 2.625-16UN 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 2.969 .980 6.000 III
M85049/5A43B1 MS17341N43B1 10-524959-405 40 1.940 1.815 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969 .980 6.000 II
M85049/5A44B1 MS17341N44B1 10-524959-406 40 1.825 1.700 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969 .980 6.000 II
M85049/5A45B1 MS17341N45B1 10-524959-407 40 1.730 1.605 2.438 2.750 2.625-16UN 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969 .980 6.000 II
M85049/5A46B1 MS17341N46B1 10-524959-408 40 1.656 1.531 2.250 2.625 2.625-16UN 1.281 4.094 2.875 6.057 2.953 2.156 2.7500 2.969 .980 6.000 II
68
YK
M
A
MIL-C-22992, QWLD Accessories
10-350695 adapter,
10-350349 cable clamp
10-350695-XX( )
adapter
10-350349-( )3
cable clamp
MS3420-( )A
sleeve
V
LEFT HAND
E
J
L
A
B
C
F
Z
69
MIL-C-22992, QWLD Accessories
10-350695 adapter,
10-350349 cable clamp
All dimensions for reference only.
* To attach the cable clamp to the left hand accessory threads of QWLD connectors, adapter 10-350695-XX is needed. Order this proprietary
adapter from column 2 and suffix the part number with the finish desired, listed in the finish chart below.
** Order MS clamp (column 3) to accommodate the cable type being used. Standard finish on the clamp is olive drab, cadmium plate.
Shell
Size
Proprietary
Adapter
Part
Number*
Clamp
Part
Number**
Superseded
MS
Part
Number
A
Thread
Class 2A
(Plated)
B
Min
Full
Thd
C
Dia
+.000
–.010
E
+.010
–.020
F
±.010
J
+.010
–.000
K
Dia
L
±.010
M
Max
V
Thread
Class 2B-LH
Y
MaxFree Closed
12 10-350695-13( ) 10-350349-12( ) MS3057-4C .625-24UNEF .422 .386 .875 .688 .484 .302 .094 1.609 1.375 .750-20UNEF .906
14 10-350695-15( ) 10-350349-14( ) MS3057-6C .750-20UNEF .422 .500 1.000 .812 .484 .428 .230 1.609 1.375 .875-20UNEF 1.031
16 10-350695-17( ) 10-350349-16( ) MS3057-8C .875-20UNEF .422 .625 1.188 .938 .481 .515 .316 1.609 1.375 1.000-20UNEF 1.125
18 10-350695-18( ) 10-350349-18( ) MS3057-10C 1.000-20UNEF .422 .752 1.312 1.062 .481 .614 .378 1.609 1.437 1.125-18UNEF 1.234
20 10-350695-20( ) 10-350349-20( ) MS3057-12C 1.1875-18UNEF .422 .891 1.438 1.250 .481 .738 .445 1.609 1.437 1.250-18UNEF 1.484
22 10-350695-22( ) 10-350349-20( ) MS3057-12C 1.1875-18UNEF .422 .891 1.562 1.250 .481 .738 .445 1.609 1.437 1.375-18UNEF 1.484
24 10-350695-24( ) 10-350349-24( ) MS3057-16C 1.4375-18UNEF .422 1.111 1.812 1.500 .481 .926 .611 1.609 1.562 1.625-18UNEF 1.671
28 10-350695-28( ) 10-350349-24( ) MS3057-16C 1.4375-18UNEF .422 1.111 2.062 1.500 .481 .926 .611 1.781 1.562 1.875-16UN 1.671
32 10-350695-32( ) 10-350349-32( ) MS3057-20C 1.750-18UNS .484 1.422 2.250 1.875 .481 1.200 .922 1.781 1.812 2.0625-16UNS 2.188
36 10-350695-36( ) 10-350349-36( ) MS3057-24C 2.000-18UNS .562 1.672 2.500 2.125 .481 1.363 .922 1.781 2.062 2.3125-16UNS 2.344
40 10-350695-40( ) 10-350349-40( ) MS3057-28C 2.250-16UN .562 1.914 2.812 2.375 .672 1.611 1.180 2.032 2.062 2.625-16UN 2.594
†Sleeve not supplied as part of assembly.
Order separately by part number shown
Shell
Size
Sleeve†
MS Part
Number
Z Dia
Free
±.016 Closed
12 MS3420-4A .219 .010
14 MS3420-4A
MS3420-6A
.219
.312
.020
.114
16 MS3420-6A
MS3420-8A
.312
.438
.085
.222
18 MS3420-6A
MS3420-10A
.312
.438
.085
.200
20 MS3420-8A
MS3420-12A
.438
.541
.177
.270
22 MS3420-8A
MS3420-12A
.438
.541
.177
.270
24
MS3420-8A
MS3420-12A
MS3420-16A
.438
.541
.750
.186
.260
.433
28
MS3420-8A
MS3420-12A
MS3420-16A
.438
.541
.750
.186
.260
.433
32
MS3420-12A
MS3420-16A
MS3420-20A
.541
.750
.938
.273
.442
.620
36
MS3420-16A
MS3420-18A
MS3420-24A
.750
.938
1.125
.358
.504
.682
40
MS3420-16A
MS3420-20A
MS3420-28A
.750
.938
1.250
.368
.514
.816
* No third digit required for 10-350695 and
not available for 10-350349.
Finish Chart for
Adapter & Clamp Suffix
Bright Cadmium Plate
Black Anodize
Olive Drab, Cadmium Plate
Gray Anodize
Anodic Coating
Olive Drab Cadmium Plate, Nickel Base
-XX1
-XX2
-XX3
-XX4
-XX*
-XX9
70
AL
D
C
F
A L
D
C
B
L
C
B
A
MIL-C-22992, QWLD Accessories
protective covers
MS17350
10-524915-( )
plug protective cover
MS17349-XXB
10-524916-( )
receptacle protective cover
MS17349-XXA
10-524917-( )
receptacle protective cover
71
MIL-C-22992, QWLD Accessories
protective covers
All dimensions for reference only.
Shell
Size
Plug
Protective Cover
MS
Part Number*
Plug
Protective Cover
Proprietary
Part Number**
A Thread
Class 2A (Plated)
0.1P-0.2L
Double Stub
B
Dia
+.010
–.005
C
Approx.
L
Max
12 MS17350-( ) 10-524915-12( ) .8750 .156 5.000 1.500
14 MS17350-( ) 10-524915-14( ) 1.0000 .156 5.000 1.500
16 MS17350-( ) 10-524915-16( ) 1.1250 .156 5.000 1.500
18 MS17350-( ) 10-524915-18( ) 1.2500 .180 5.000 1.500
20 MS17350-( ) 10-524915-20( ) 1.3750 .180 5.000 1.500
22 MS17350-( ) 10-524915-22( ) 1.5000 .180 6.000 1.500
24 MS17350-( ) 10-524915-24( ) 1.7500 .180 6.000 1.500
28 MS17350-( ) 10-524915-28( ) 2.0000 .180 6.000 1.500
32 MS17350-( ) 10-524915-32( ) 2.2500 .209 6.000 1.500
36 MS17350-( ) 10-524915-36( ) 2.5000 .209 6.000 1.500
40 MS17350-( ) 10-524915-40( ) 2.7500 .209 6.000 1.500
Shell
Size
Receptacle
Protective Cover
MS
Part Number*
Receptacle
Protective Cover
Proprietary
Part Number**
A Thread
Class 2B
0.1P-0.2L
Double Stub
B
+.010
–.005
C
Approx.
D
Dia.
Max
F
+.010
–.000
L
Max
12 MS17349-( )B
MS17349-( )A
10-524916-12( )
10-524917-12( ) .8750 .156 5.000 1.094 1.016 .765
14 MS17349-( )B
MS17349-( )A
10-524916-14( )
10-524917-14( ) 1.0000 .156 5.000 1.219 1.141 .765
16 MS17349-( )B
MS17349-( )A
10-524916-16( )
10-524917-16( ) 1.1250 .156 5.000 1.344 1.266 .980
18 MS17349-( )B
MS17349-( )A
10-524916-18( )
10-524917-18( ) 1.2500 .180 5.000 1.469 1.391 .980
20 MS17349-( )B
MS17349-( )A
10-524916-20( )
10-524917-20( ) 1.3750 .180 5.000 1.562 1.516 .980
22 MS17349-( )B
MS17349-( )A
10-524916-22( )
10-524917-22( ) 1.5000 .180 6.000 1.688 1.641 .980
24 MS17349-( )B
MS17349-( )A
10-524916-24( )
10-524917-24( ) 1.7500 .180 6.000 1.938 1.891 .980
28 MS17349-( )B
MS17349-( )A
10-524916-28( )
10-524917-28( ) 2.0000 .180 6.000 2.219 2.141 .980
32 MS17349-( )B
MS17349-( )A
10-524916-32( )
10-524917-32( ) 2.2500 .209 6.000 2.469 2.391 .980
36 MS17349-( )B
MS17349-( )A
10-524916-36( )
10-524917-36( ) 2.5000 .209 6.000 2.719 2.641 .980
40 MS17349-( )B
MS17349-( )A
10-524916-40( )
10-524917-40( ) 2.7500 .209 6.000 2.969 2.891 .980
*Order MS-approved covers as per coded part number
example:
1. MS Number -
MS17350 designated plug protective cover
MS17349 designated receptacle protect cover
2. Cover Finish - C for conductive, N for non-conductive.
3. Cover Size - Shell size of connector with which
cover is used.
4. Cover Type - (MS17349 only) -
A - Washer Termination, used with:
MS17345 line (cable connecting) plug
MS17347 jam nut receptacle
MS17348 jam nut receptacle
B - Eyelet Termination - used with:
MS17343 wall mount receptacle
MS17346 box mount receptacle
PART NUMBER
MS17350 C28 A
1234
**Order Proprietary covers as per coded
part number example:
1. Base Number -
10-524915 designates plug cover with
chain
10-524916 designates receptacle cover
with chain
10-524917 designates receptacle cover
with chain and attaching ring
2. Cover Size - Shell size of connector with
which cover is used.
3. Finish -
5 - Non-conductive Alumilite finish
9 - Conductive olive drab cadmium
plate over nickel finish
Note:
Protective covers are supplied with all
M85049 style cable sealing adapters.
PART NUMBER
10-524915 –285
123
72
.031 ±.010 (10-36675)
.031 ±.005 (10-40450)
T
4 HOLES
F
R
(TP)
R
(TP)
QWLD Accessories
sealing gaskets
All dimensions for reference only.
*10-36675-( ) for operating temperature range – 67° to + 275°F.
Order by part number listed to accommodate shell size being used.
Part
Number*
Shell
Size
F
Dia
+.016
–.000
R
±.010
T
Dia
±.010
10-36675-14 12 .875 .906 .172
10-36675-16 14 1.000 .969 .172
10-36675-18 16 1.125 1.063 .203
10-36675-20 18 1.250 1.156 .203
10-36675-22 20 1.375 1.250 .203
10-36675-24 22 1.500 1.375 .203
10-36675-28 24 1.750 1.563 .203
10-36675-32 28 2.000 1.750 .219
10-36675-36 32 2.188 1.938 .219
10-36675-40 36 2.438 2.188 .219
10-36675-44 40 2.688 2.375 .219
10-36675-48 44 2.938 2.625 .219
**10-40450-( ) for operating temperature range 0° to + 275°F.
Order by part number listed to accommodate shell size being used.
Part
Number**
Shell
Size
F
Dia
+.016
–.000
R
±.010
T
Dia
±.010
10-40450-14 12 .875 .906 .172
10-40450-16 14 1.000 .969 .172
10-40450-18 16 1.125 1.063 .203
10-40450-20 18 1.250 1.156 .203
10-40450-22 20 1.375 1.250 .203
10-40450-24 22 1.500 1.375 .203
10-40450-28 24 1.750 1.563 .203
10-40450-32 28 2.000 1.750 .219
10-40450-36 32 2.188 1.938 .219
10-40450-40 36 2.437 2.188 .219
10-40450-44 40 2.688 2.375 .219
10-40450-48 44 2.938 2.625 .219
73
C H D G Y
.425 REF
Q
L
N
A
LEFT
HAND
.125 +.010
–.000
.060 ±.005
.060 ±.005
.180 ±.005
QWLD Accessories
encapsulation adapter
All dimensions for reference only.
*Order by part number listed to accommodate shell size being used. To
complete part number add suffix for finish desired from table below.
Part
Number*
Shell
Size
A
Thread
Class 2B-LH
C
Dia
±.031
D
Dia
±.005
G
+.010
–.000
H
Dia
±.005
L
±.031
N
±.016
Q
±.010
Y
Dia
10-242067-13( ) 12 .750-20UNEF .500 .673 .766 .673 1.175 .479 .923 .798
10-242067-15( ) 14 .875-20UNEF .656 .797 .844 .797 1.175 .479 1.047 .922
10-242067-17( ) 16 1.000-20UNEF .813 .923 .969 .923 1.175 .479 1.172 1.048
10-242067-18( ) 18 1.125-18UNEF .938 1.047 1.094 1.047 1.175 .479 1.297 1.172
10-242067-20( ) 20 1.250-18UNEF 1.063 1.172 1.219 1.172 1.175 .479 1.422 1.297
10-242067-22( ) 22 1.375-18UNEF 1.188 1.297 1.344 1.297 1.175 .479 1.547 1.423
10-242067-24( ) 24 1.625-18UNEF 1.312 1.537 1.469 1.422 1.175 .479 1.787 1.662
10-242067-28( ) 28 1.875-16UN 1.500 1.797 1.719 1.679 1.175 .479 2.047 1.922
10-242067-32( ) 32 2.0625-16UN 1.800 2.047 2.000 1.960 1.175 .479 2.297 2.172
10-242067-36( ) 36 2.3125-16UN 2.000 2.297 2.219 2.179 1.175 .479 2.547 2.422
10-242067-40( ) 40 2.625-16UN 2.250 2.609 2.469 2.429 1.375 .667 2.859 2.734
10-242067-44( ) 44 2.875-16UN 2.459 2.857 2.782 2.742 1.375 .667 3.110 2.982
10-242067-48( ) 48 3.125-16UN 2.719 3.107 3.046 3.004 1.375 .667 3.360 3.244
Finish Suffix
Bright Cadmium Plate
Black Anodize
Cadmium Plate, Olive Drab
Gray Anodize
Anodic Coating
Cadmium Plate Nickel Base
-XX1
-XX2
-XX3
-XX4
-XX5
-XX7
74
D
L
C
QWLD Accessories
encapsulation end bell
All dimensions are for reference only.
*Order by part number listed to
accommodate shell size being used.
Part
Number*
C
Dia
D
Dia
±.010
L
±.010
10-130999-13 .766 +.000
–.010 .484 1.273
10-130999-15 .844 +.000
–.010 .609 1.273
10-130999-17 .969 +.000
–.010 .734 1.273
10-130999-18 1.094 +.000
–.010 .859 1.242
10-130999-20 1.219 +.000
–.015 .984 1.242
10-130999-22 1.344 +.000
–.015 1.109 1.242
10-130999-24 1.469 +.000
–.015 1.234 1.179
10-130999-28 1.719 +.000
–.015 1.427 1.179
10-130999-32 2.000 +.000
–.020 1.708 1.101
10-130999-36 2.219 +.000
–.020 1.895 1.101
10-130999-40 2.469 +.000
–.020 2.130 1.101
10-130999-44 2.782 +.000
–.020 2.443 1.101
10-130999-48 3.046 +.000
–.020 2.707 1.101
75
MIL-C-22992, QWLD
MS solder contacts
* Solder Wells Unfilled
**Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data
given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching surges, tran-
sients, etc. can be expected in a particular circuit.
SOLDER CONTACTS*
Part
Number
Pin/
Socket
Mating
End Size
Wire Barrel
Size
Allowable
Wire Size
Test Current**
Amps
10-36982-3
10-36983-3
Pin
Socket 16 Long 16
16
18
20
22
13
10
7.5
5
10-36982-5
10-36983-5
Pin
Socket 12 12 12
10
23
17
10-407028-8
10-407029-8
Pin
Socket 888
10
46
33
10-407028-4
10-407029-4
Pin
Socket 444
6
80
60
10-407028-3
10-407029-3
Pin
Socket 00
0
1
2
150
125
100
Machine copper alloy contacts in a full range of sizes, with closed entry socket design in
the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style sol-
der contacts for maximum corrosion resistance, maximum current carrying capacity and
low millivolt drop. Gold plated contacts are also available (See how to order, page 22).
Table I
CONTACT ARRANGEMENT
SERVICE RATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC(RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
* The values listed in Table I represent operating values
which include a generous safety factor. It may be nec-
essary for some applications to exceed the operating
voltages listed here. If this is necessary, desigers will
find Table II useful for determining the degree to
which the recommended values of Table I can be
exceeded.
Table II
ALTITUDE VOLTAGE
DERATING** CHART
MS
Service
Rating
Nominal
Distance
Standard Sea
Level Conditions
Pressure Altitude†
50,000 Feet
Pressure Altitude†
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC(RMS)
Test
Voltage
AC(RMS)
Minimum
Flashover
Voltage
AC(RMS)
Test
Voltage
AC(RMS)
Minimum
Flashover
Voltage
AC(RMS)
Test
Voltage
AC(RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
Not corrected for changes in density due to variations in temperature.
**No attempt has been made to recommend operating voltages. The designer must determine his own operating
voltage by the application of a safety factor to the above derating chart to compensate for circuit transients,
surges, etc.
76
QWLD
solderless (crimp) contacts
Machined from copper alloys and silver-plated for maximum corrosion resis-
tance, with a minimum millivolt drop and a maximum current carrying capacity,
the size 16 and 12 socket contacts are of the closed entry design. Crimp con-
tacts are available for all MS insert arrangements and are identified with an
Amphenol ® proprietary number. Gold plated contacts are also available (See
how to order, page 22).
* When using wire adapter sleeve shown.
** Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all
contacts continuously. Please note that the electrical data given is not an establishment of electrical safety fac-
tors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching
surges, transients, etc. can be expected in a particular circuit.
CRIMP CONTACTS*
Part
Number
Pin/
Socket
Mating End
Size
Wire Barrel
Size
Allowable
Wire Size
Required Wire
Adapter Sleeve
Test Current**
Amps
10-40557 Pin
16 Long 16
16
18
20
22*
10-74696-6
13
10
7.5
5
10-40556 or
10-597109-171 Socket
10-40561 Pin
12 12 12
14
23
17
10-40560 or
10-597109-131 Socket
10-40792 Pin 88 8
10*
10-74696-1
46
33
10-40793 Socket
10-40564 Pin 44
4
6*
10-74696-2
80
60
10-40565 Socket
10-40562 Pin 00
0
2*
10-74696-7
150
100
10-40563 Socket
* The values listed in Table I represent operating values
which include a generous safety factor. It may be nec-
essary for some applications to exceed the operating
voltages listed here. If this is necessary, designers will
find Table II useful for determining the degree to which
the recommended values of Table I can be exceeded.
Table I
CONTACT ARRANGEMENT
SERVICE RATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A 700 500 1/8 1/16
D 1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
operating voltage by the application of a safety factor to the above derating chart to compensate for circuit
transients, surges, etc.
Table II
ALTITUDE VOLTAGE
DERATING**
MS
Service
Rating
Nominal Distance
Standard Sea Level
Conditions
Pressure Altitude†
50,000 feet
Pressure Altitude†
70,000 feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A 1/16 1/8 2800 2000 800 600 450 360
D 1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
77
QWLD
application tools
Complete installation instructions (L-615) for Amphenol®
QWLD Series Connectors are available on request.
The following data includes information pertaining to the
application tools which have been established for crimp-
ing, inserting and removing crimp contacts used in
QWLD Series Connectors.
* Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266
**For appropriate crimp tool and positioner refer to Pico Crimping Tool Co.
Tool used with Arbor press 11-7364.
Contact Crimping, Insertion & Removal Tools
Crimping
Tool
Positioner/
Turr et
Contact
Size
Contact
Style
Insertion
Tool
Removal
Tool
M22520/1-01 * 16 Pin & Socket 11-7345 11-8250 Kit
M22520/1-01 * 12 Pin & Socket 11-7082 11-8250 Kit
** ** 8 Pin & Socket 11-8220 11-8250 Kit
** ** 4 Pin & Socket 11-7365-4† Pin 11-7370-4†
Socket 11-7674-2†
** ** 0 Pin & Socket 11-7365-5† Pin 11-7370-5†
Socket 11-7674-3†
78
Amphenol Heavy Duty
Cylindrical Connectors
QWL Series
wall mount receptacle thru bulkhead receptacle
straight plug
cable connecting plug
box mount receptacle flange mount plug
jam nut receptacle jam nut receptacle
(wall mount) (box mount)
Amphenol® QWL Series Connec-
tors are tailor made for compact,
heavy duty industrial use.
The outstanding performance of this
series makes it well suited for ship-
board installations and ground sup-
port power distribution applications
where physical strength and depend-
ability are key requirements.
The QWL Series are a versatile,
economical alternative to military
qualified designs.
Equivalent MS shell sizes and insert
arrangements offer compatibility with
all standard cable types. MIL-C-22992
environmental connector require-
ments (see page 1) are used as a per-
formance criteria base for this series
to assure reliability under the most
severe conditions.
The design features of this connec-
tor series provide:
Exceptional Service - high
strength aluminum shells with Alu-
milite 225* hard anodic finish and
shock resistant resilient inserts.
Foolproof Operation - rugged
double stub coupling threads, left
hand accessory threads and sim-
ple single keyway mating.
Versatility - both MS and custom
insert patterns available for a wide
variety of multiconductor cables.
A complete line of accessories is
available for use with QWL Series
connectors, including cable sealing
and clamp adapters, protective cov-
ers, flange gaskets and banding
clamps.
For further information concerning
Amphenol® QWL Series connectors,
request catalog 12-053 or contact
your local sales office.
* Registered trademark of Aluminum
Company of America
®